4.8 Article

Lightweight Si3N4@SiO2 ceramic foam for thermal insulation and electromagnetic wave transparency

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Physical

Porous 3D carbon-based materials: An emerging platform for efficient hydrogen production

Fangyi Li et al.

Summary: Carbon-based materials have attracted great interest for their unique properties and breakthroughs in clean energy applications. However, their low selectivity and poor conductivity have hindered their commercialization. To improve hydrogen production efficiency, researchers are exploring ways to increase surface area, create interconnected porous channels, and enhance stability of carbon-based materials. This review summarizes the structural advantages and performance improvements of various porous carbon-based materials and evaluates the performance of hydrogen production methods. The role of active sites in promoting charge transport, electrical conductivity, and stability during hydrogen production is discussed. Challenges and future directions for the development of high-efficiency hydrogen 3D porous carbon-based materials are also discussed.

NANO RESEARCH (2023)

Article Chemistry, Physical

Carbon aerogel microspheres with in-situ mineralized TiO2 for efficient microwave absorption

Yue-Yi Wang et al.

Summary: In this study, carbon aerogel microspheres with in-situ mineralized TiO2 were successfully prepared via a sol-gel transition and calcination process. The resulting hybrid material exhibited excellent microwave absorption performance and impedance matching performance, as well as a broad effective absorption bandwidth.

NANO RESEARCH (2022)

Review Engineering, Environmental

A comprehensive review on the application of aerogels in CO2-adsorption: Materials and characterisation

Leila Keshavarz et al.

Summary: In recent years, greenhouse gases, especially CO2, have been released into the atmosphere in increasing quantities due to industrial emissions and combustion activities, contributing to surface temperature rise and global climate changes. Aerogels are considered promising adsorbents for CO2 capture because of their tunable surface chemistry and appropriate textural properties. Further research is needed on low-cost materials and production processes to explore the commercial feasibility of aerogels as CO2 capture adsorbents.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Ceramics

Formation of hierarchical Si3N4 foams by protein-based gelcasting and chemical vapor infiltration

Junsheng Li et al.

Summary: Silicon nitride foams with a hierarchical porous structure were successfully formed by combining protein-based gelcasting, chemical vapor infiltration, and in-situ growth of silicon nitride nanowires. These foams have controllable high porosity, good strength, and permeability at different scales, making them suitable for microparticle infiltration applications.

JOURNAL OF ADVANCED CERAMICS (2021)

Article Materials Science, Ceramics

Structure and performance control of porous Si3N4 ceramics fabricated by freeze-drying process

Mengyong Sun et al.

Summary: By adding glycerol and silica sol, the structure and performance of porous Si3N4 ceramics can be improved, such as changing pore structure, increasing mechanical properties and dielectric constant.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Design, thermal shock resistance of dense BaO-Al2O3-SiO2 glass/Si3N4-barium feldspar coating for porous Si3N4 ceramic

Zongwei Tong et al.

Summary: The Si3N4-m-BAS composite has excellent dielectric properties, low density, and low thermal expansion coefficient. A dense Si3N4-BAS coating was successfully prepared on porous Si3N4 ceramic, improving its water resistance and ensuring dielectric performances. The coating exhibited low water absorption, high bonding strength, and self-healing properties during thermal shock tests.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Article Nanoscience & Nanotechnology

Insulating and Robust Ceramic Nanorod Aerogels with High-Temperature Resistance over 1400 °C

Enshuang Zhang et al.

Summary: This study presents a novel approach to fabricate ceramic nanorod aerogels (CNRAs) with hierarchically macroporous and mesoporous structures by assembling Al2O3 nanorods and SiO2 nanoparticles. The high-temperature annealing treatment of CNRAs enhances mechanical strength and improves thermal tolerance, resulting in aerogels with exceptional heat resistance, low thermal conductivity, high compressive strength, and low density for potential applications in extreme environments.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Si3N4 Nanofibrous Aerogel with In Situ Growth of SiOx Coating and Nanowires for Oil/Water Separation and Thermal Insulation

Zongwei Tong et al.

Summary: Through a low-temperature chemical vapor deposition method, Si3N4 nanofibrous aerogel was successfully cross-linked and made hydrophobic, resulting in improved performance and stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Ceramics

Fabrication of in-situ self-reinforced Si3N4 ceramic foams for high-temperature thermal insulation by protein foaming method

Feiyue Yang et al.

Summary: In-situ self-reinforced Si3N4 ceramic foams were fabricated with high compressive strength, thermal insulation properties, and improved high-temperature oxidation resistance compared to ordinary protein foamed ceramics.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Effect of sintering atmosphere on the crystallizations, porosity, and thermal expansion coefficient of cordierite honeycomb ceramics

Ki-Woong Chae et al.

Summary: The study investigated the effects of sintering atmosphere on DPF honeycomb pore size, crystallization, amorphous phase, and CTE. Sintering in double-enclosed crucibles resulted in decreased pore-size distribution and enhanced cordierite/indialite phase crystallization rate. The higher CTE of DPFs produced in mildly reducing atmospheres was attributed to the increased crystallization rate due to reduced liquid-phase viscosity.

CERAMICS INTERNATIONAL (2021)

Review Chemistry, Multidisciplinary

Aerogels in drug delivery: From design to application

Carlos A. Garcia-Gonzalez et al.

Summary: Aerogels, as the lightest solid materials on Earth, have shown great potential in drug delivery due to their high porosity and specific surface area. By tuning the aerogel structure and functionalization, site-specific, stimuli-responsive, and prolonged drug release can be achieved. This review highlights the recent advances in aerogels for drug delivery, focusing on loading efficiency, release kinetics, therapeutic demands, as well as gene therapy and life cycle assessment.

JOURNAL OF CONTROLLED RELEASE (2021)

Article Materials Science, Ceramics

One-pot foam-gelcasting/nitridation synthesis of high porosity nano-whiskers based 3D Si3N4 porous ceramics

Lei Han et al.

Summary: 3D-NWSNPC has high porosity, low density, low thermal conductivity, high compressive strength, and specific strength. Despite its low density, it shows outstanding performance in compressive strength and specific strength.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Chemistry, Multidisciplinary

Three-Dimensional Reticulated, Spongelike, Resilient Aerogels Assembled by SiC/Si3N4 Nanowires

Xiaoyan Zhang et al.

Summary: This study proposed a novel method to fabricate porous aerogels with a highly porous structure, excellent mechanical stability, thermal insulation, and absorption capacity by utilizing polymer sponge as a template attached with reactive particles and carbothermal reduction process to realize nanowire growth.

NANO LETTERS (2021)

Article Nanoscience & Nanotechnology

Directionally Tailoring Macroporous Honeycomb-Like Structured Carbon Nanofibers toward High-Capacitive Potassium Storage

Yuanming Wu et al.

Summary: The use of macroporous honeycomb-like carbon nanofibers as an anode material for high-capacitive potassium storage demonstrated significantly improved kinetics and structural stability. The structural characteristics of the material enabled ultrahigh potassium storage ability and competitive rate capability, even after repeated cycles at high current densities. This work offers a promising strategy for effectively improving K+ diffusion kinetic performance and promoted K+ adsorption/intercalation storage through macropore engineering coupled with an amorphous structure.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Printed Honeycomb-Structured Reduced Graphene Oxide Film for Efficient and Continuous Evaporation-Driven Electricity Generation from Salt Solution

Miao Wu et al.

Summary: This study demonstrates an enhanced evaporation-induced output power in salt solution by utilizing a honeycomb-structured rGO film, leading to a 2-fold increase in open-circuit voltage and a 3.3-fold increase in power density compared to DI water. The generator can work continuously in natural seawater for over 240 hours, showing stable performance and advancing practical applications in water-evaporation-induced electricity generation.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Applied

Highly thermally conductive and eco-friendly OH-h-BN/chitosan nanocomposites by constructing a honeycomb thermal network

Qian Zou et al.

Summary: A novel eco-friendly material with high thermal conductivity was reported by compositing chitosan microspheres and hydroxyl-functionalized hexagonal boron nitride nanoplatelets. Through honeycomb-like structure, the thermal conductivity reached 5.66 W·m-1·K-1 at 50 wt%, showing significant improvement compared to traditional structured materials.

CARBOHYDRATE POLYMERS (2021)

Article Engineering, Environmental

Honeycomb-like activated carbon with microporous nanosheets structure prepared from waste biomass cork for highly efficient dye wastewater treatment

Qihang Wang et al.

Summary: Cork-activated carbons (CACs) with a unique honeycomb-like structure and ultra-high specific surface area were synthesized for efficient methylene blue (MB) adsorption. CACs exhibited outstanding MB adsorption capacity and reusability compared to other adsorbents.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Multidisciplinary

A Hierarchical Mesoporous Insulation Ceramic

Ruizhe Yang et al.

NANO LETTERS (2020)

Article Materials Science, Ceramics

Microstructure control and optimization of low temperature pressureless sintered silicon nitride - barium aluminosilicate composites

Zongwei Tong et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Nanoscience & Nanotechnology

Resilient Si3N4 Nanobelt Aerogel as Fire-Resistant and Electromagnetic Wave-Transparent Thermal Insulator

Lei Su et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Ceramics

Monolithic silicon nitride-based aerogels with large specific surface area and low thermal conductivity

Yong Kong et al.

CERAMICS INTERNATIONAL (2019)

Article Materials Science, Ceramics

In situ synthesis of three-dimensional nanofiber-knitted ceramic foams via reactive sintering silicon foams

Wenlong Huo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Materials Science, Ceramics

Novel micro-spherical Si3N4 nanowire sponges from carbon-doped silica sol foams via reverse templating method

Xiaoyan Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Chemistry, Multidisciplinary

Ultralight, Recoverable, and High-Temperature-Resistant SiC Nanowire Aerogel

Lei Su et al.

ACS NANO (2018)

Article Chemistry, Multidisciplinary

Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels

Zhi-Long Yu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Physical

Sturdy, Monolithic SiC and Si3N4 Aerogels from Compressed Polymer-Cross-Linked Silica Xerogel Powders

Parwani M. Rewatkar et al.

CHEMISTRY OF MATERIALS (2018)

Meeting Abstract Chemistry, Multidisciplinary

IUPAC definition of the hydrogen bond. Terminology and nomenclature

Gautam R. Desiraju

ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES (2017)

Article Nanoscience & Nanotechnology

Carbon Hollow Microspheres with a Designable Mesoporous Shell for High-Performance Electromagnetic Wave Absorption

Hailong Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Multidisciplinary

Synthesis, Properties, and Applications of Hollow Micro-/Nanostructures

Xiaojing Wang et al.

CHEMICAL REVIEWS (2016)

Article Materials Science, Ceramics

Ultralight Silicon Nitride Ceramic Foams from Foams Stabilized by Partially Hydrophobic Particles

Xiao-Yan Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

Article Chemistry, Physical

Hydrogen-Bonding Effects on Infrared Spectra from Anharmonic Computations: Uracil-Water Complexes and Uracil Dimers

Teresa Fornaro et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2015)

Review Materials Science, Multidisciplinary

Bioinspired engineering of honeycomb structure - Using nature to inspire human innovation

Qiancheng Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2015)

Review Materials Science, Multidisciplinary

Electromagnetic properties of Si-C-N based ceramics and composites

Xiaowei Yin et al.

INTERNATIONAL MATERIALS REVIEWS (2014)

Article Multidisciplinary Sciences

Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating

Xu Deng et al.

SCIENCE (2012)

Article Chemistry, Multidisciplinary

Thermal conductivity modeling of core-shell and tubular nanowires

RG Yang et al.

NANO LETTERS (2005)

Article Chemistry, Multidisciplinary

Colloidal carbon spheres and their core/shell structures with noble-metal nanoparticles

XM Sun et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2004)

Review Chemistry, Physical

Molecular biomimetics: nanotechnology through biology

M Sarikaya et al.

NATURE MATERIALS (2003)

Article Materials Science, Multidisciplinary

Partially coherent phonon heat conduction in superlattices

B Yang et al.

PHYSICAL REVIEW B (2003)