☆ 4.6 Article

3D-printing of attapulgite monoliths with superior low-temperature selective catalytic reduction activity: the influence of thermal treatment

NEW JOURNAL OF CHEMISTRY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Coaxial 3D Printing of Zeolite-Based Core-Shell Monolithic Cu-SSZ-13@SiO2 Catalysts for Diesel Exhaust Treatment

Yingzhen Wei et al.

Summary: Conventional approaches for fabricating core-shell catalysts encounter restrictions on synthesis conditions and design flexibility. In this study, a facile coaxial 3D printing strategy is developed to construct zeolite-based core-shell monolithic catalysts with interconnected honeycomb structures. This strategy allows for flexible design and fabrication of various core-shell monolithic catalysts with customized functionalities.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Unveiling the SO2 Resistance Mechanism of a Nanostructured SiO2(x)@Mn Catalyst for Low-Temperature NH3-SCR of NO

Hongli Wu et al.

Summary: A novel SiO2@Mn catalyst with a core-shell structure was synthesized using manganese carbonate tailings, which effectively limited SO(2) adsorption and enhanced the catalyst's resistance to SO2. The catalyst exhibited improved N-2 selectivity and increased NH3 adsorption capacity due to the interaction between Mn and Si. Additionally, the formation mechanisms of N2O and the anti-SO2 poisoning mechanism were proposed, and DFT calculations showed that SO(2) preferentially adsorbed onto the SiO2 surface, preventing erosion of active sites.

INORGANIC CHEMISTRY (2023)

添加到收藏夹

Article Engineering, Chemical

Enhancing SO2-shielding effect and Lewis acid sites for high efficiency in low-temperature SCR of NO with NH3: Reinforced electron-deficient extent of Fe3+enabled by Ti4+in Fe2O3

Yixuan Fan et al.

Summary: Ti-doped Fe2O3 nanoparticles show high activity and resistance to SO2, allowing for efficient reduction of NO at low temperatures. The addition of Ti4+ strengthens the electron-deficient tendency of Fe3+, enabling the catalyst to selectively adsorb NH3 and resist SO2. In addition, the embedded Ti4+ also increases the number of Lewis acid sites, enhancing the reaction rate of SCR.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Engineering 3D-printed aqueous colloidal ceramic slurry for direct ink writing

Jie Zhu et al.

Summary: This work developed a ceramic slurry suitable for direct ink writing and explored its potential application in adsorption. The optimized slurry showed good printing effect and stable mechanical properties. Compared to powder adsorbents, the DIW ceramics prepared from the slurry had the advantages of easy separation and operation.

GREEN CHEMICAL ENGINEERING (2023)

添加到收藏夹

Article Engineering, Chemical

Elaborating the improving SO2 resistance mechanism of CeWTi catalysts through framework confined ordered mesoporous structures for low-temperature NH3-SCR reaction

Mengqian Li et al.

Summary: In this study, an ordered mesoporous Ce-W-Ti-E catalyst with a framework confined structure was constructed for enhancing the SO2 tolerance in the NH3-SCR reaction at low temperature. The framework confined ordered mesoporous structure provided a larger specific surface area and abundant active sites for the catalyst. The introduction of W element increased surface acid sites and inhibited the adsorption of SO2 on the catalyst surface, thus protecting the active sites from SO2 attack. Overall, the Ce-W-Ti-E catalyst showed a wide operating temperature range, better stability, and strong sulfur resistance, leading to an extended catalyst lifetime in the NH3-SCR process.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

添加到收藏夹

Article Chemistry, Physical

Design, Synthesis, and Insights into the Redox Mechanism of Highly Efficient One-Pot Cu-ZSM-5 Catalysts for the Reduction of NO x by NH3-SCR at Low Temperatures

Chengming Zhong et al.

Summary: Cu-ZSM-5 zeolites have promising NH3-SCR activity over a wide range of temperatures. The challenges in preparing Cu-ZSM-5 include reducing cost and simplifying the preparation process. The one-pot method using the Cu-amine complex as a template is a successful strategy, but there is still a lack of methods for preparing Cu-ZSM-5. In this study, a one-pot method using the Cu-(EDA)(2) complex as a template is developed to prepare the Cu-ZSM-5-O catalyst.

ACS CATALYSIS (2023)

添加到收藏夹

Article Engineering, Environmental

3D printing of the multifunctional fixed-bed reactor and matched 3D-CeO2/ ATP monolithic adsorbent for adsorption desulfurization

Jie Zhu et al.

Summary: The 3D-CeO2/ATP monolithic adsorbents were successfully constructed through a 3D printing strategy, showing excellent adsorption desulfurization performance of more than 85 % sulfur removal at room temperature. Combined with a 3D-printed multifunctional fixed-bed reactor, a reaction process capable of adsorption-elution was designed for deep adsorption of sulfide in fuel and resource recovery of high-value sulfide products. The structure and physicochemical property of the 3D-CeO2/ATP monolithic adsorbents were characterized, and the adsorption and elution mechanism were investigated in detail.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Physical

Comparison of precursors for the synthesis of Cu-SSZ-39 zeolite catalysts for NH3-SCR reaction

Jinpeng Du et al.

Summary: Cu-SSZ-39 zeolites were prepared using different precursors, and Cu2.5-SSZ-39-Z prepared using ZSM-5 showed the highest atomic utilization and particle size. Cu2.5-SSZ-39-Z exhibited the best low-temperature NH3-SCR activity and hydrothermal stability, making it a preferred precursor for industrial preparation of Cu-SSZ-39 zeolite.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

添加到收藏夹

Article Construction & Building Technology

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

Hao Yao et al.

Summary: This study investigated the impact of rheological behavior of fresh 3D printing concrete on interlayer bonding properties and proposed an empirical formula considering porosity and hydration degree.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Calcined Attapulgite Clay as Supplementary Cementing Material: Thermal Treatment, Hydration Activity and Mechanical Properties

Tao Shi et al.

Summary: The present study investigates the effects of different calcination temperatures on the appearance, mineral composition, and active SiO2 content in attapulgite. It also examines the influence of calcined attapulgite on the chemically bonded water content, hydration degree of cement paste, and mechanical properties of cement mortar. The results suggest that a calcination temperature of 500 degrees C yields the best enhancement in cement-based materials' hydration activity. This study highlights the potential of using calcined attapulgite clay to reduce energy consumption in the cement industry and promote the sustainable development of attapulgite clay.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Attapulgite-interpenetrated g-C3N4/Bi2WO6 quantum-dots Z-scheme heterojunction for 2-mercaptobenzothiazole degradation with mechanism insight

Yingshan Zeng et al.

Summary: The rational utilization and integration of g-C3N4 and QDs semiconductors, as well as expanded interfacial contact and multi-channel electron transfer, have led to the successful fabrication of BCAs nanocomposites with outstanding photocatalytic activity. The optimized sample BCA5 exhibits nearly-100% degradation rate of the targeted organic contaminant.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Engineering, Environmental

Recent advances in 3D printing for catalytic applications

Jie Zhu et al.

Summary: Three-dimensional (3D) printing is revolutionizing the design and manufacturing of 3D objects by transforming digital models into solid models. In the field of catalysis, 3D printing technology offers new possibilities and is widely applied in related catalytic reactions and processes.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Recycling of waste attapulgite to prepare ceramic membranes for efficient oil-in-water emulsion separation

Chao Wang et al.

Summary: In this study, low-cost ceramic membranes were prepared using waste materials and demonstrated superior performance in oily wastewater treatment, suggesting their potential for solid waste utilization and oil wastewater treatment.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of microstructure, mechanical, and corrosion properties of SS316L/Al2O3 composites produced by hot pressing

Ozlem Canpolat et al.

Summary: In this paper, Al2O3 reinforced SS316L matrix composites were fabricated using powder metallurgy. The effect of Al2O3 content on the mechanical properties, corrosion resistance, and microstructure of the composites was investigated. The results showed that changing the Al2O3 content could significantly affect the composite's crystallite size and corrosion resistance. By adjusting the Al2O3 content, the performance of the composites can be improved to a certain extent.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Energy & Fuels

Alkali metal-resistant mechanism for selective catalytic reduction of nitric oxide over V2O5/HWO catalysts

Running Kang et al.

Summary: A series of V2O5/HWO catalysts were prepared by hydrothermal and impregnation methods, with the V2O5/HWO-C catalyst showing optimal NH3-SCR performance due to its rod-shaped morphology and high dispersion. The K-loaded K-V2O5/HWO-C catalyst exhibited effective resistance to K poisoning and SO2, maintaining high NOx conversion efficiency at high temperatures.

FUEL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Printed Gelatin/Sodium Alginate Hydrogel Scaffolds Doped with Nano-Attapulgite for Bone Tissue Repair

Chun Liu et al.

Summary: The Gel/SA/nano-ATP composite hydrogel scaffolds, doped with nano-attapulgite, exhibited good mechanical properties and printability. They showed excellent bioactivity in vitro, promoting osteogenesis of BMSCs, and effectively enhancing bone regeneration in vivo.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2021)

添加到收藏夹

Article Chemistry, Physical

Rapid capturing of oil-degrading bacteria by engineered attapulgite and their synergistic remediation for oil spill

Xiuping Chen et al.

Summary: The study found that using PAH-ATP modified bacteria can effectively emulsify oil and facilitate subsequent biodegradation. PAH-ATP can capture bacteria to the surface of oil droplets, significantly improving the degradation efficiency of oil pollution. Furthermore, the presence of PAH-ATP does not inhibit the activity and reproduction of bacteria.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Preparation of Graphene Oxide/Attapulgite Composites and Their Demulsification Performance for Oil-in-Water Emulsion

Jun Liu et al.

Summary: In this study, AT-GO composites were successfully prepared and showed good demulsification performance, with a demulsification efficiency above 95% at room temperature. The interaction behavior between the AT-GO material and emulsified molecules of asphaltenes was found to be key to the demulsification process.

ENERGY & FUELS (2021)

添加到收藏夹

Article Environmental Sciences

Improvement of the activity and SO2 tolerance of Sb-modified Mn/PG catalysts for NH3-SCR at a low temperature

Xianlong Zhang et al.

Summary: The addition of Sb can effectively enhance the SCR activity and improve the SO2 tolerance of Mn/PG catalyst. Sb acts as a shield to protect Mn active species from being sulfated by SO2, thus slowing down catalyst deactivation in the presence of SO2.

JOURNAL OF ENVIRONMENTAL SCIENCES (2021)

添加到收藏夹

Article Chemistry, Physical

Adsorption Behavior of Crystal Violet and Congo Red Dyes on Heat-Treated Brazilian Palygorskite: Kinetic, Isothermal and Thermodynamic Studies

Vanderlane Cavalcanti Silva et al.

Summary: The study investigated the effect of heat treatment on the adsorptive capacity of Brazilian palygorskite for removing CV and CR dyes, showing that calcination increased the adsorption capacity of palygorskite, with the greatest adsorption capacity observed in the sample calcined at 700 degrees C. The Pal-700T sample exhibited better adsorption performance for both dyes, especially at basic pH.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials

Mehdi Chougan et al.

Summary: Pawel Sikora received funding from the European Union's Horizon 2020 program.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Environmental

3D-printed monolithic catalyst of Mn-Ce-Fe/attapulgite for selective catalytic reduction of nitric oxide with ammonia at low temperature

Yanqin Li et al.

Summary: The Mn-Ce-Fe/ATP powder catalyst exhibited excellent catalytic activity over a wide temperature range. Mn-Ce-Fe/ATP monolithic catalysts prepared by 3D printing showed good NO removal rates at different temperatures, with specific porosity and space velocity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

The effect of support on the structure and photocatalytic activity of ternary ZnO-ZnFe2O4/palygorskite composite photocatalysts

Meng Kuang et al.

ADVANCED POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

The structure directing agent isomer used in SSZ-39 synthesis impacts the zeolite activity towards selective catalytic reduction of nitric oxides

Ross Ransom et al.

JOURNAL OF CATALYSIS (2020)

添加到收藏夹

Article Engineering, Environmental

Full spectrum driven SCR removal of NO over hierarchical CeVO4/attapulgite nanocomposite with high resistance to SO2 and H2O

Xiazhang Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preparation of Carboxymethyl Cellulose-g- Poly(acrylamide)/Attapulgite Porous Monolith With an Eco-Friendly Pickering-MIPE Template for Ce(III) and Gd(III) Adsorption

Feng Wang et al.

FRONTIERS IN CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

The promoting effect of palygorskite on CeO2-WO3-TiO2 catalyst for the selective catalytic reduction of NOx with NH3

Wangwang Xie et al.

APPLIED CLAY SCIENCE (2020)

添加到收藏夹

Article Chemistry, Applied

3D-printing of integrated spheres as a superior support of phosphotungstic acid for deep oxidative desulfurization of fuel

Jie Zhu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

A Novel 3D-bioprinted Porous Nano Attapulgite Scaffolds with Good Performance for Bone Regeneration

Zehao Wang et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of W on the acidity and redox performance of the Cu0.02Fe0.2WaTiOx (a=0.01, 0.02, 0.03) catalysts for NH3-SCR of NO

Shibo Ma et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

Cesar Parra-Cabrera et al.

CHEMICAL SOCIETY REVIEWS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Novel multi-metal containing MnCr catalyst made from manganese slag and chromium wastewater for effective selective catalytic reduction of nitric oxide at low temperature

Gaorong Wang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Chemistry, Analytical

Preparation of attapulgite nanoparticles-based hybrid monolithic column with covalent bond for hydrophilic interaction liquid chromatography

Mengsa Chai et al.

TALANTA (2018)

添加到收藏夹

Article Engineering, Chemical

Fe-Beta@CeO2 core-shell catalyst with tunable shell thickness for selective catalytic reduction of NOx with NH3

Jixing Liu et al.

AICHE JOURNAL (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polymers for 3D Printing and Customized Additive Manufacturing

Samuel Clark Ligon et al.

CHEMICAL REVIEWS (2017)

添加到收藏夹

Article Construction & Building Technology

Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture

Ali Kazemian et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Free-Standing Graphene Oxide-Palygorskite Nanohybrid Membrane for Oil/Water Separation

Xueting Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

Recent progress in dispersion of palygorskite crystal bundles for nanocomposites

Wenbo Wang et al.

APPLIED CLAY SCIENCE (2016)

添加到收藏夹

Article Engineering, Environmental

Effect of MnO2 polymorphs structure on the selective catalytic reduction of NOx with NH3 over TiO2-Palygorskite

Shiping Luo et al.

CHEMICAL ENGINEERING JOURNAL (2016)

添加到收藏夹

Article Engineering, Environmental

Selective catalytic reduction of nitric oxide by hydrogen over NiFe2-xPdxO4 catalysts at low temperature

Chaochao Xu et al.

CHEMICAL ENGINEERING JOURNAL (2016)

添加到收藏夹

Article Chemistry, Physical

Robust superhydrophobic attapulgite coated polyurethane sponge for efficient immiscible oil/water mixture and emulsion separation

Jian Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Engineering, Environmental

A simple hydrothermal approach to modify palygorskite for high-efficient adsorption of Methylene blue and Cu(II) ions

Wenbo Wang et al.

CHEMICAL ENGINEERING JOURNAL (2015)

添加到收藏夹

Article Chemistry, Physical

A Highly Effective Catalyst of Sm-MnOx for the NH3-SCR of NOx at Low Temperature: Promotional Role of Sm and Its Catalytic Performance

Dongmei Meng et al.

ACS CATALYSIS (2015)

添加到收藏夹

Article Chemistry, Physical

One-pot fabrication of multifunctional superparamagnetic attapulgite/Fe3O4/polyaniline nanocomposites served as an adsorbent and catalyst support

Bin Mu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Materials Science, Composites

Attapulgite-graphene oxide hybrids as thermal and mechanical reinforcements for epoxy composites

Rongguo Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of rehydration on structure and surface properties of thermally treated palygorskite

Haibo Liu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)

添加到收藏夹

Article Chemistry, Physical

Surface properties evolution of attapulgite by IGC analysis as a function of thermal treatment

Lilya Boudriche et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)

添加到收藏夹

Article Engineering, Environmental

Removal capacity and adsorption mechanism of heat-treated palygorskite clay for methylene blue

Hao Chen et al.

CHEMICAL ENGINEERING JOURNAL (2011)

添加到收藏夹

Article Thermodynamics

Thermogravimetric analysis-mass spectrometry (TG-MS) of selected Chinese palygorskites-Implications for structural water

Hongfei Cheng et al.

THERMOCHIMICA ACTA (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.