Experimental investigation on mode I fracture characteristics of Longmaxi formation shale after cyclic thermal shock and high-temperature acid etching treatments

Fracture toughness is a key parameter for shale hydraulic fracturing design, which directly affects the fracture initiation pressure. In this paper, the influence of cyclic thermal shock and high -temperature acid etching on the Mode I fracture of Longmaxi Formation shale was investi-gated. The crack propagation was obtained by using acoustic emission (AE) and digital image correlation (DIC) techniques. Meanwhile, the fracture surface morphology and microstructure of the specimens were analyzed using white light interferometer and scanning electron microscope (SEM). The experimental results demonstrate that cyclic thermal shock severely degrades the nominal strength and fracture toughness of shale. The average fracture toughness is found to be only 0.67 MPa & sdot;m0.5, which accounts for a reduction of 25.9 %. AE analysis reveals that micro -fracture is the dominant mechanism, with the highest amplitude of AE source only 78 dB. The critical strain value of the fracture propagation zone (FPZ) is determined to be 1.35 %o, and SEM images indicate that along-crystal fracture is the primary fracture mechanism. On the other hand, the shale specimen subjected to high-temperature acid-etching treatment exhibits an average fracture toughness of 0.86 MPa & sdot;m0.5, with the AE source amplitude reaching 86 dB. The critical strain value of the FPZ was measured to be 2.38 %o. The fracture surface appears smooth and is mainly characterized by perforated-crystal rupture. The findings of this study not only enhance our understanding of shale mode I fracture toughness but also provide valuable insights for optimizing process parameters to reduce initiation pressure in deep shale formations.

Automated summary

The influence of cyclic thermal shock and high-temperature acid etching on the Mode I fracture of shale was investigated in this study. It was found that cyclic thermal shock severely degrades the strength and fracture toughness of shale, while high-temperature acid etching treatment improves the fracture toughness. These findings are valuable for optimizing process parameters to reduce initiation pressure in deep shale formations.