☆ 4.7 Article

Graphene with different groups on the interfacial properties of carbon fiber/epoxy composites

POLYMER (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

CNT coating and anchoring beads enhance interfacial adhesion in fiber composites

Sabyasachi Ghosh et al.

Summary: The fiber-matrix interface plays a crucial role in determining the strength and toughness of fiber composites. By coating glass fibers with bundles of carbon nanotubes and applying epoxy beads, the strength and toughness of the composites were significantly increased. The enhancement was achieved by strengthening and toughening the fiber-matrix interface through the scaffold created by the coated fibers and anchoring of the epoxy beads. Moreover, the coated and beaded fibers can be woven into a smart fabric to further improve the mechanical and electrical properties of flexible functional composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Improving interfacial adhesion and mechanical properties of carbon fiber reinforced polyamide 6 composites with environment-friendly water-based sizing agent

Chun Yan et al.

Summary: In this study, a water-based aminoethylpiperazine-polyamide (AEPPA) sizing agent is synthesized and applied to improve the interfacial properties of CF/PA6 composites. The AEPPA sizing layer enhances CF surface wettability, promoting better impregnation of PA6 resin and forming a strong interface through interdiffusion and hydrogen bond formation. The treated composites exhibit an increase in interfacial shear strength and mechanical properties, attributed to effective stress transfer across the interface. The strengthening mechanism of interfacial properties is thoroughly analyzed.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Composites

Mechanics of reinforcement in a hybrid graphene and continuous glass fibre reinforced thermoplastic

Mufeng Liu et al.

Summary: Adding a small amount of graphene nanoplatelets to glass fibre reinforced polymer composites can enhance the stiffness and strength of the material due to the improved local reinforcement effect of the matrix in the composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Composites

Simultaneously tuning interfacial and interlaminar properties of glass fiber fabric/epoxy laminated composites via modifying fibers with graphene oxide

Jinlong Zhao et al.

Summary: In this study, graphene oxide (GO) with different oxidation degrees was synthesized and grafted onto the surface of glass fiber fabric (GFf) for the fabrication of GFf/epoxy laminated composites. The interlaminar and interfacial properties as well as interlaminar microstructure of the composites were investigated. The results showed that the dispersion state and strengthening/toughening efficiency of GO in the composites were influenced by the various oxygen-containing functional groups on the GO surface due to oxidation degrees, thus affecting the composites' interlaminar and interfacial adhesion. The optimal oxidation degree of GO was achieved by using a moderate weight ratio of oxidation agent (KMnO4)/graphite (2:1), which improved the interlaminar shear strength, work of fracture, storage moduli, fiber/matrix interfacial adhesion, and glass-transition temperature of the composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Composites

Improved the interfacial characteristics of carbon fiber/polyamide 6 composites by synthesizing polydopamine rapidly on the carbon fiber surface with ultrasound-assisted

Na Sun et al.

Summary: The interface between carbon fiber (CF) and polyamide 6 (PA6) composites is a major factor affecting their mechanical properties. In this study, researchers utilized ultrasound to synthesize a polydopamine (PDA) coating on CF, which significantly improved the interface characteristics of CF/PA6 composites and enhanced their mechanical properties.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

Raman spectroscopy of carbon materials and their composites: Graphene, nanotubes and fibres

Zheling Li et al.

Summary: Raman spectroscopy is a crucial technique for analyzing carbon-based materials, providing unique insights into their microstructure. It allows for characterization of aspects such as orientation, layers, defects, and doping, enabling standardization and quality control. The application of Raman spectroscopy in studying graphene has aided in the analysis of carbon nanotubes and fibers. The technique can also be used to track deformation in carbon-based materials and study interfacial micromechanics in composites.

PROGRESS IN MATERIALS SCIENCE (2023)

添加到收藏夹

Article Materials Science, Composites

Enhanced mechanical and tribological properties of carbon fiber/PEEK composites by hydroxylated boron nitride nanosheets and polyetherimide sizing agents

Yingze Li et al.

Summary: In this study, a mixture sizing agent containing hydroxylated boron nitride and polyetherimide was synthesized to improve the interfacial adhesion between carbon fiber and polyetheretherketone. The synergistic effects of hydrogen bonding, 7C-7C interaction, and good compatibility were evaluated to enhance the miscibility, mechanical properties, and tribological properties of the composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Composites

Chemical grafting of graphene onto carbon fiber to produce composites with improved interfacial properties via sizing process: A step closer to industrial production

Nan Li et al.

Summary: This research established a direct and efficient method to manufacture Graphene/CF hierarchical reinforcement based on chemical bonding. The prepared graphene-modified multi-scale composites exhibit excellent comprehensive properties, including improved interfacial shear strength, flexural strength, and glass transition temperature.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Use a polyurethane sizing agent to improve the interfacial properties of carbon fiber-reinforced polyurethane composites

Sheng-Xia Li et al.

Summary: An aqueous polyurethane sizing agent was used to continuously treat anodized carbon fiber tow in order to enhance the interfacial properties of carbon fiber-reinforced polyurethane composites. Experimental results indicate that the sizing agent significantly improves the interfacial properties, as evidenced by the increase in interlaminar shear strength (ILSS). Further heat treatment resulted in a higher ILSS value, suggesting that the sizing agent promotes the reaction between the resin matrix and the carbon fiber surface. Overall, the polyurethane sizing agent shows promise in improving the interfacial properties of carbon fiber-reinforced polyurethane composites.

NEW CARBON MATERIALS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation on interlaminar behavior of different morphology GO structured carbon fiber reinforced epoxy composites

Xueqin Zhang et al.

Summary: This study focused on the deoxygenation of exfoliated graphene oxide to fabricate different morphology GO structured carbon fiber via electrophoretic deposition. The composite with pitaya-like GO structure displayed superior interlaminar performance and excellent resistance to high-low temperature cycling. The study provided guidance for optimizing interfacial properties of composites by regulating the morphology of two-dimensional nanomaterials on carbon fiber.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Designing strong interfacial adhesion between carbon fiber and epoxy resin via dopamine towards excellent protection ability under high hydrostatic pressure and severe erosion corrosion condition

Qingyuan Zhao et al.

Summary: The study used dopamine-modified carbon fiber to reinforce epoxy coatings, significantly enhancing the erosion wear resistance and anti-corrosion ability of the coatings while reducing mass and volume loss. The interfacial shear strength of CF-PDA/epoxy was improved by 32.20%, highlighting the importance of interfacial strength in erosion wear resistance of coatings.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Composites

Improving the damping properties of carbon fiber reinforced polymer composites by interfacial sliding of oriented multilayer graphene oxide

Luyang Gong et al.

Summary: This paper investigates the effect of two-dimensional multilayer graphene oxide (GO) on the damping properties of carbon fiber reinforced polymer (CFRP) composites, and demonstrates that the deposition of GO on the surface of carbon fibers can significantly enhance the damping properties of CFRPs.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Composites

Preparing water-based phosphorylated PEEK sizing agent for CF/PEEK interface enhancement

Hanxiong Lyu et al.

Summary: A two-step process is proposed to modify PEEK for preparing an environmentally friendly water-based sizing agent, which improves the interface between CF and PEEK, ultimately enhancing the mechanical properties of composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Interfacial reinforcement of composites by the electrostatic self-assembly of graphene oxide and NH3 plasma-treated carbon fiber

Jie Li et al.

Summary: In this study, a new method of electrostatic self-assembly was proposed to graft graphene oxide (GO) onto carbon fiber (CF) surfaces. The CF@GO exhibited significant improvements in tensile strength, surface wettability, and interfacial properties.

APPLIED SURFACE SCIENCE (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhancing mechanical strength of carbon fiber-epoxy interface through electrowetting of fiber surface

Xiaoming Chen et al.

Summary: A novel method based on electrically-assisted wetting technique was developed to strengthen the interfacial adhesion between carbon fiber and polymer matrix. The results showed that under applied external electric field, the polymer completely infiltrated the small grooves on the fiber surface during the curing process, resulting in a conformal contact interface. The as-prepared composites exhibited a maximum increased interfacial shear strength (IFSS) of 119.69 MPa, which was 81.02% higher than that of the original fiber-based composites. The improvement in IFSS was attributed to the enhanced wettability and mechanical interlock effect induced by the applied electrical stimulus, which was supported by dynamic simulation of two-phase flow.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Yi Hu et al.

Summary: In this work, an optimized electrophoretic deposition (EPD) approach was used to deposit MXene nanoparticles onto carbon fiber surfaces, leading to improved interfacial properties. The MXene-CF hybrids were then used to fabricate continuous carbon fiber reinforced polymer (CFRP) composites. The presence of MXene nanoparticles significantly increased the fiber surface energy and wettability, resulting in enhanced interfacial strength and flexural properties of CFRP.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Improved interfacial shear strength in carbon fiber enhanced semi-aromatic polyamide 6T composite via in-situ polymerization on fiber surface

Zhao Wang et al.

Summary: The interfacial property of carbon fiber reinforced semi-aromatic poly (hexamethylene terephthalamide) thermoplastic composite has been improved by in-situ polymerization on fiber surface, resulting in enhanced interfacial shear strength and tensile strength.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Composites

Direct electrochemical grafting of crystalline PAEK macromolecule on carbon fiber to enhance the interfacial properties of PEEK/CF composites

Shengdao Wang et al.

Summary: In this research, the direct grafting of Poly (aryl ether ketone) (PAEK) macromolecule on carbon fiber was achieved with mild condition. The single molecular-force spectroscopy analysis confirmed the success of the grafting. The interfacial shear strength of the grafted carbon fiber and PEEK was significantly improved, enhancing the overall interface performance.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Construction & Building Technology

The effect of the modification of graphene oxide with γ-aminopropyltriethoxysilane (KH550) on the properties and hydration of cement

Xiaotao Zhang et al.

Summary: This study discusses the effect of incorporating graphene oxide (GO) and KH550 modified graphene oxide (MGO) on the microstructure, mechanical properties, and hydration process of cement-based composites. The results show that the surface of MGO is grafted with functional groups, which improves its dispersibility in cement paste. Furthermore, the addition of MGO promotes cement hydration even more than GO, resulting in a more uniform microstructure. The inclusion of MGO also refines the crystal size of hydrated calcium hydroxide (CH), reduces total porosity, and transforms harmful pores to harmless ones, thus enhancing the compactness and mechanical properties of cement-based materials.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Materials Science, Composites

Effects of functionalized graphene oxide modified sizing agent on the interfacial and mechanical properties of carbon fiber reinforced polyamide 6 composites

Guangbin Cai et al.

Summary: By grafting functionalized graphene oxide onto carbon fiber, the interfacial and mechanical properties of carbon fiber reinforced polyamide 6 composites can be improved. The functionalized graphene oxide enhances interfacial compatibility and wettability, and retards crack propagation along the interface based on the reinforcement effect. The CF/PA6 composites treated with the modified sizing agent exhibit higher interfacial shear strength, interlaminar shear strength, tensile strength, and flexural strength.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Using a carbon fiber sizing to tailor the interface-interphase of a carbon nanotube-polymer system

Mohammad Hamza Kirmani et al.

Summary: The primary goal of this study is to integrate a crucial step from the conventional carbon fiber-reinforced composite (CFRPs) manufacturing process into the fabrication of carbon nanotube composites. The effect of a sizing agent on the interface-interphase properties of the CNT-BMI composite system was investigated. The results showed that the presence of CNTs changes the cure kinetics of the sizing agent, and functionalized CNTs have the most significant effect. Additionally, CNTs with sizing can significantly alter the cure reactions of the resin and the structure and thermo-mechanical properties of the CNT polymer nanocomposites.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhanced interfacial adhesion of carbon fiber/epoxy composites by synergistic reinforcement with multiscale rigid-flexible structure at interphase

Peifeng Feng et al.

Summary: The study focused on the fabrication of two synergistic hierarchical reinforcements with multiscale rigid-flexible structures, analyzing the effects of interface thickness and grafting sequence on interfacial properties of the composites. The CF-GO-CNTsPA/resin composites exhibited higher interfacial shear strength compared to other composite materials, mainly due to the thicker gradient interface layer and synergistic effects of GO and CNTs.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Enhancing the interfacial properties of high-modulus carbon fiber reinforced polymer matrix composites via electrochemical surface oxidation and grafting

Yingpiao Fu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

High performance epoxy composites prepared using recycled short carbon fiber with enhanced dispersibility and interfacial bonding through polydopamine surface-modification

Xianhua Huan et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and properties of silanized functionalized graphene/polyurethane composites

Huan Liu et al.

FERROELECTRICS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Interfacial adhesion of recycled carbon fibers to polypropylene resin: Effect of superheated steam on the surface chemical state of carbon fiber

Guangbin Cai et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Enhanced interfacial strength of carbon fiber/PEEK composites using a facile approach via PEI&ZIF-67 synergistic modification

Hansong Liu et al.

Journal of Materials Research and Technology-JMR&T (2019)

添加到收藏夹

Article Materials Science, Composites

Establishing a phthalocyanine-based crosslinking interphase enhances the interfacial performances of carbon fiber/epoxy composites at elevated temperatures

Mei He et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Self-assembly of graphene aerogel on carbon fiber for improvement of interfacial properties with epoxy resin

Liu Liu et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

CNT/polymer interface in polymeric composites and its sensitivity study at different environments

Rajesh Kumar Prusty et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of graphene oxide addition on the interlaminar shear property of carbon fiber-reinforced epoxy composites

Xiao Han et al.

NEW CARBON MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Functionalized Graphene Nanoplatelets on the Morphology and Properties of Phenolic Resins

Jing Dai et al.

JOURNAL OF NANOMATERIALS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Tunable Interfacial Adhesion of Glass Fiber by Hybrid Multilayers of Graphene Oxide and Aramid Nanofiber

Byeongho Park et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of a gradient interface layer in interfacial enhancement of carbon fiber/epoxy hierarchical composites

Lei Chen et al.

JOURNAL OF MATERIALS SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced mechanical properties of ammonia-modified graphene nanosheets/epoxy nanocomposites

Dong-Dong Zhang et al.

RSC ADVANCES (2015)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Surface Treatment of Carbon Fibers - A Review

S. Tiwari et al.

2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING, ICIAME 2014 (2014)

添加到收藏夹

Article Materials Science, Characterization & Testing

The Improvement of Wettability, Mechanical and Thermo-mechanical Performances of PBO Fiber/Epoxy Composites by Adding Reactive Carbon Nanotubes

Xiaochao Li et al.

POLYMERS & POLYMER COMPOSITES (2011)

添加到收藏夹

Article Materials Science, Coatings & Films

Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment

Jianfei Xie et al.

SURFACE & COATINGS TECHNOLOGY (2011)

添加到收藏夹

Article Chemistry, Physical

Functionalized single-walled carbon nanotubes for carbon fiber-epoxy composites

Elena Bekyarova et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.