4.7 Article

Design and synthesis of hierarchical MnO-Fe3O4@C/expanded graphite composite for sensitive electrochemical detection of bisphenol A

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Analytical

??????????????Competition-Based Two-Dimensional Photonic Crystal Dually Cross-Linked Supramolecular Hydrogel for Colorimetric and Fluorescent Dual-Mode Sensing of Bisphenol A

Wenfang Du et al.

Summary: In this study, a two-dimensional photonic crystal dually cross-linked supramolecular hydrogel was constructed for the colorimetric and fluorescent dual-mode sensing of bisphenol A (BPA) using a host-guest pair of beta-cyclodextrin and tert-butyl. The proposed method provides a sensitive, selective, cost-effective, and regenerative dual-mode approach for BPA analysis, and offers new insights for the design of diversified sensing platforms.

ANALYTICAL CHEMISTRY (2023)

Article Chemistry, Analytical

Interfacial superassembly of flower-like NiMn-LDH@poly-L-lysine composites for selective electrochemical sensing of tryptophan

Jing Qian et al.

Summary: In this study, a NiMn-layered double hydroxide (LDH)@poly-L-lysine (PLL) composite was prepared and utilized for the monitoring of tryptophan in different samples. The synthesized composite exhibited high stability and a flower-like morphology, and its electron transfer rate was greatly improved due to the introduction of PLL. The coordination promotion between NiMn-LDH and PLL contributed to the increased sensitivity of electrochemical response. The fabricated sensor displayed a wide linear response range and high anti-interference ability for tryptophan detection.

ANALYTICA CHIMICA ACTA (2023)

Article Chemistry, Analytical

Electrochemical sensor based on confined synthesis of gold nanoparticles @ covalent organic frameworks for the detection of bisphenol A

Xi Zhang et al.

Summary: An electrochemical sensor based on gold nano-particles and COFs was developed for the detection of BPA, showing high sensitivity and satisfactory recovery in real water samples.

ANALYTICA CHIMICA ACTA (2023)

Article Environmental Sciences

Preparation of 2D Graphene/MXene nanocomposite for the electrochemical determination of hazardous bisphenol A in plastic products

Jerome Rajendran et al.

Summary: The graphene/Ti3C2Tx nanocomposite was successfully prepared and used for the fabrication of a highly sensitive and selective BPA sensor, showing excellent detection performance and stability.

CHEMOSPHERE (2022)

Article Food Science & Technology

A novel fluorescence sensor based on Zn porphyrin MOFs for the detection of bisphenol A with highly selectivity and sensitivity

Yixuan Pang et al.

Summary: In this study, a novel luminescent sensor Zn-TCPP-MOF was designed for ultra-sensitive and quantitative detection of BPA, displaying a highly sensitive and selective fluorescence quenching mechanism. The adsorption experiments showed Zn-TCPP-MOF had the most evident adsorption performance for BPA, and zeta potential tests indicated only BPA could significantly change the surface potential of Zn-TCPP-MOF.

FOOD CONTROL (2022)

Article Chemistry, Analytical

Covalent organic framework DQTP modified pencil graphite electrode for simultaneous determination of bisphenol A and bisphenol S

Yu-Ying Huang et al.

Summary: A new portable 3D-printed electrochemical electrode clamp was designed and used with a covalent organic framework-modified pencil graphite electrode for detecting bisphenol A and bisphenol S. The sensor showed high electrical conductivity and catalytic activity, with a good linearity and low detection limits for the two bisphenols.

TALANTA (2022)

Review Green & Sustainable Science & Technology

Recent Development of Hierarchical Metal Oxides Based Gas Sensors: From Gas Sensing Performance to Applications

HaiXia Yu et al.

Summary: This article reviews the development of metal oxide-based gas sensors, focusing on hierarchical sensing materials. The authors discuss the design strategy, application fields, sensing mechanisms, and research advances for different gases. They also explore the future prospects and challenges of hierarchical metal oxide-based gas sensors.

ADVANCED SUSTAINABLE SYSTEMS (2022)

Article Electrochemistry

Electro fabrication of molecularly imprinted sensor based on Pd nanoparticles decorated poly-(3 thiophene acetic acid) for progesterone detection

Anila Rose Cherian et al.

Summary: In recent years, there has been significant interest in the design and engineering of electrodes for sensitive and selective detection of hormones. This study proposes an electrochemical strategy for the detection of progesterone by generating a composite film of palladium nanoparticles and 3-thiophene acetic acid (3-TAA) coupled with molecular imprinting technology. The results show that the palladium nanoparticles increase sensitivity, while molecular imprinting technology enhances specificity.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Analytical

A label-free photoelectrochemical sensor of S, N co-doped graphene quantum dot (S, N-GQD)-modified electrode for ultrasensitive detection of bisphenol A

Qiaowei Chen et al.

Summary: S, N co-doped graphene quantum dot (S, N-GQD) materials were synthesized and used as photosensitive materials in a label-free photoelectrochemical (PEC) sensor. The materials exhibited enhanced photocurrent response towards Bisphenol A (BPA) sensing, improved charge transfer rate, and increased absorption of visible light. The sensor showed linear current response to BPA within two ranges, with a detection limit of 0.04 μM and good stability and interference immunity.

MICROCHIMICA ACTA (2022)

Review Food Science & Technology

Electrochemical sensors based on carbon nanostructures for the analysis of bisphenol A-A review

Omid Moradi

Summary: The overuse of Bisphenol A (BPA) has become a serious global public health problem due to its potential harm to the environment and human health, particularly in reproductive disorders, heart disease, and diabetes. Carbon-based nanostructures have been extensively studied for the fabrication of electrochemical BPA sensors due to their unique advantages, such as real-time monitoring, simplicity, high selectivity, high sensitivity, and easy operation.

FOOD AND CHEMICAL TOXICOLOGY (2022)

Article Engineering, Electrical & Electronic

Fabrication of a Branch-Like Ni-Doped ZnO/Graphene Nanoplatelet Composite for Enhanced Electrochemical Determination of 17β-Estradiol and Acetaminophen

Yuli Shen et al.

Summary: Efficient and high-performance sensing materials are essential for sensitive and selective electrochemical detection of different targets. In this study, a Ni-doped ZnO/graphene nanoplatelet composite was successfully synthesized and utilized for the electrochemical determination of acetaminophen and estradiol. The composite exhibited a larger electrochemically active area and enhanced catalytic activity compared to Ni-ZnO or GNP alone, resulting in improved electrochemical response and sensitive determination of the target drugs.

JOURNAL OF ELECTRONIC MATERIALS (2022)

Article Environmental Sciences

Recent advances in electrochemical sensor developments for detecting emerging pollutant in water environment

V. Karthik et al.

Summary: Considerable studies have been done recently on detecting emerging pollutants in wastewater, such as paracetamol. Electrochemical sensors have been developed to effectively detect lower concentrations of pollutants. Non-enzymatic sensors are considered the best electroanalytical method, with functionalized materials being used for enhancing sensitivity.

CHEMOSPHERE (2022)

Article Nanoscience & Nanotechnology

Cobalt-Doped Fe3O4 Nanospheres Deposited on Graphene Oxide as Electrode Materials for Electrochemical Sensing of the Antibiotic Drug

Raja Nehru et al.

Summary: The study presented the preparation of a Co-Fe3O4 NS/GO sensor through a hydrothermal technique, which achieved a low detection limit and excellent sensitivity for chloramphenicol detection in food products, with satisfactory results in analysis of food samples.

ACS APPLIED NANO MATERIALS (2021)

Review Chemistry, Analytical

Current trends and roles of surfactants for chromatographic and electrochemical sensing

Didem Nur Unal et al.

Summary: Surfactants are frequently used in different fields of analytical chemistry to reduce the interfacial tension of immiscible liquids by forming micelles through hydrophobic and hydrophilic groups. Their use in techniques such as chromatography and electrochemistry has been noted for improving separation efficiency and increasing sensor selectivity and sensitivity.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2021)

Article Multidisciplinary Sciences

XPS and structural studies of Fe3O4-PTMS-NAS@Cu as a novel magnetic natural asphalt base network and recoverable nanocatalyst for the synthesis of biaryl compounds

Homa Kohzadi et al.

Summary: A novel magnetic nanocatalyst was successfully synthesized and characterized for its catalytic activity in Suzuki and Stille coupling reactions. This catalyst can be easily separated and reused due to its magnetic properties, maintaining high catalytic activity.

SCIENTIFIC REPORTS (2021)

Article Environmental Sciences

Effectively removing tetracycline from water by nanoarchitectured carbons derived from CO2: Structure and surface chemistry influence

Juan Yang et al.

Summary: Understanding the correlation between the physico-chemical properties of adsorbents and the adsorption performance of contaminants is crucial for the development of efficient materials for removing antibiotic contamination from water. In this study, novel carbon adsorbents were synthesized and modified to enhance their adsorption capacity for tetracycline. Results showed that surface functional groups and large pores of adsorbents positively affected the adsorption rate, while more adsorption sites and surface functional groups improved the adsorption affinity. These findings provide valuable insights for directing the control of carbon structure to enhance adsorption performance in terms of rate, capacity, and affinity for antibiotics.

ENVIRONMENTAL RESEARCH (2021)

Article Chemistry, Physical

An Electrochemical Bisphenol: a Sensor Based on Bimetallic Ce-Zn-MOF

Dihui Huang et al.

Summary: This study successfully constructed a new BPA electrochemical sensor based on Ce-Zn-MOF/MWCNT multi-layer modification, allowing for efficient detection of BPA and measurement of BPA in drinking water, with a wide range of potential applications.

ELECTROCATALYSIS (2021)

Article Electrochemistry

A comparison study of MFe2O4 (M: Ni, Cu, Zn)-reduced graphene oxide nanocomposite for electrochemical detection of bisphenol A

Salih Zeki Bas et al.

Summary: The electrochemical results showed that the NiFe2O4-rGO nanocomposite modified SPE exhibited higher sensing performance towards the oxidation of bisphenol A than other ferrite-based SPEs, with good linearity, low detection limit, and high sensitivity. The specificity of the sensor towards BPA was evaluated by analyzing interference effects, and satisfactory responses were obtained when detecting BPA in water bottle samples using only a few drops of the real sample diluted with a phosphate buffer solution.

ELECTROCHIMICA ACTA (2021)

Review Chemistry, Applied

Electrochemical detection of bisphenols in food: A review

Yuhuan Zhang et al.

Summary: The paper comprehensively reviews the developed electrochemical methods for BPs sensing in food, emphasizing the need for high sensitivity and selectivity, and discusses the mechanisms and characteristics of different electrochemical technologies.

FOOD CHEMISTRY (2021)

Article Chemistry, Analytical

A Flexible Nafion Coated Enzyme-free Glucose Sensor Based on Au-dimpled Ti Structures

Adrian Olejnik et al.

ELECTROANALYSIS (2020)

Article Chemistry, Multidisciplinary

A highly sensitive and selective hydroquinone sensor based on a newly designed N-rGO/SrZrO3 composite

Khursheed Ahmad et al.

NANOSCALE ADVANCES (2020)

Article Chemistry, Physical

Nitrogen-doped graphene in-situ modifying MnO nanoparticles for highly improved lithium storage

Hua-Wen Huang et al.

APPLIED SURFACE SCIENCE (2019)

Article Nanoscience & Nanotechnology

MOF-Derived Hierarchical MnO-Doped Fe3O4@C Composite Nanospheres with Enhanced Lithium Storage

Zhishun He et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Multidisciplinary

A novel octahedral MnO/RGO composite prepared by thermal decomposition as a noble-metal free electrocatalyst for ORR

Qiuling Wu et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Article Nanoscience & Nanotechnology

Bisphenol A Sensors on Polyimide Fabricated by Laser Direct Writing for Onsite River Water Monitoring at Attomolar Concentration

Cheng Cheng et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Electrochemistry

Oxygen reduction to hydrogen peroxide on Fe3O4 nanoparticles supported on Printex carbon and Graphene

Willyam R. P. Barros et al.

ELECTROCHIMICA ACTA (2015)

Review Chemistry, Physical

Binary metal oxide: advanced energy storage materials in supercapacitors

Yufei Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Analytical

Sensors and biosensors for analysis of bisphenol-A

K. V. Ragavan et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2013)