☆ 4.7 Article

Effect of laser preparation strategy on surface wettability and tribological properties under starved lubrication

TRIBOLOGY INTERNATIONAL (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Wettability transition and tribological properties of hydrophobic alloy surfaces prepared by one-step method

Jian Ma et al.

Summary: The hydrophobic sinusoidal textured surfaces were fabricated on 40Cr steel through nanosecond laser ablation through oil film. The textured surface exhibited a transition from hydrophilicity to hydrophobicity and reduced the friction coefficient.

TRIBOLOGY INTERNATIONAL (2023)

添加到收藏夹

Article Engineering, Mechanical

Analysis of tribological behavior of dual-textured Ti-6Al-4 V alloy surfaces fabricated using a tool-mimic approach

Tanmay Tiwari et al.

Summary: The present study focuses on analyzing the tribological performance of dual-textured Ti-6Al-4 V surfaces. The results showed that both the circular textured surface (CTS) and the cross-hatch textured surface (CHTS) had lower coefficients of friction (COF) compared to the untextured surface (UTS) under different loads. Additionally, the presence of the dual textures resulted in a decrease in the contact angle of the Phosphate buffer saline (PBS) solution, indicating a hydrophilic nature. Microstructural analysis confirmed the alterations in the grain structure of the material, indicating the successful creation of functional surfaces using the tool-mimic approach.

TRIBOLOGY INTERNATIONAL (2023)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser-induced texture on lubrication retention and tribological properties of 40Cr alloy surfaces

Jian Ma et al.

Summary: Continuous and proper oil lubrication between friction pairs can reduce wear and increase the service life of mechanical components. The synergistic effects of oil wettability and spreadability on lubrication durability and tribological properties were investigated. The capillary action of textured structures promotes oil spreadability and reduces the relaxation time of the contact angle, while laser-induced oxidation and hydroxylation affect the final contact angle. However, excessive absorption behavior of textures limits oil wettability and spreadability. In addition, capillary action and hydroxylation provide a textured surface with excellent oil spreadability and a relatively high contact angle, which are critical for maintaining surface lubrication and improving tribological properties.

TRIBOLOGY INTERNATIONAL (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Modified Wettability of Micro-structured Steel Surfaces Fabricated by Elliptical Vibration Diamond Cutting

Jianguo Zhang et al.

Summary: Hardened steel is an important material in modern industry, and modifying its wettability through micro/nano structuring is crucial for enhancing adhesion strength and resistance to corrosion and wear under extreme conditions. The feasibility of micro/nano sculpturing of hardened steels using elliptical vibration diamond cutting is presented in this study, with optimal structural parameters identified to increase the hydrophobicity of textured steel.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superhydrophobic SLA 3D printed materials modified with nanoparticles biomimicking the hierarchical structure of a rice leaf

Belen Barraza et al.

Summary: Researchers have successfully created a novel biomimetic superhydrophobic surface inspired by the lotus leaf and shark skin properties of rice leaves. The surface structure exhibits low anisotropy and hysteresis contact angles, making it suitable for various applications such as self-cleaning and drag reduction.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2022)

添加到收藏夹

Review Engineering, Mechanical

Tailored surface textures to increase friction-A review

Henara L. Costa et al.

Summary: Surface textures with micro-scale feature dimensions have the potential to enhance frictional performance and intentionally increase friction in various applications. This review presents the state-of-the-art in textured surfaces for high-friction purposes, summarizing recent trends in laser surface texturing and discussing the potential of surface textures in different applications. The involved mechanisms responsible for friction increase are emphasized, and current shortcomings and future research directions are addressed to highlight the great potential of (laser-based) surface texturing methods for innovations in surface engineering.

FRICTION (2022)

添加到收藏夹

Article Engineering, Mechanical

Parameter-dependent tribological properties of sinusoidal-textured plasma-sprayed coatings

Xianghua Zhan et al.

Summary: Texture parameters significantly affect the tribological properties, with the texture area ratio, width-depth ratio, and angular velocity being the most influential factors.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Control of the hydrophobicity of rare earth oxide coatings deposited by solution precursor plasma spray by hydrocarbon adsorption

Pengyun Xu et al.

Summary: The study investigates the wetting behavior and surface composition of Yb2O3 and Al2O3 coatings under different post-deposition treatments, revealing that different treatments result in different wetting behaviors for Yb2O3 coatings, correlated with the content of hydrocarbon on the surface. Yb2O3 coatings can transition between superhydrophobicity and superhydrophilicity based on the post-deposition treatment, while Al2O3 coatings exhibit lower wetting behavior.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Liquid-repellent and self-repairing lubricant-grafted surfaces constructed by thiol-ene click chemistry using activated hollow silica as the lubricant reservoir

Mengnan Yu et al.

Summary: In this study, a lubricant-grafted slippery surface (LGSS) was prepared by grafting vinyl-terminated polydimethylsiloxane (Vi-PDMS) onto sulfhydryl-modified hollow mesoporous silica (SH-HMS) through a thiol-ene click reaction, exhibiting excellent antifouling and self-repairing properties. This newly developed strategy for constructing liquid-repellent coatings has the potential to advance interfacial antifouling materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Review Engineering, Mechanical

Synergetic effects of surface texturing and solid lubricants to tailor friction and wear - A review

Andreas Rosenkranz et al.

Summary: Surface texturing and solid lubricants can significantly reduce friction and wear under dry conditions, and their synergistic effect has advantages in tribological performance. The article summarizes the latest research progress on surface texturing and solid lubricants, discusses the synergy between them, highlights the underlying mechanisms, identifies gaps in the existing understanding, and suggests opportunities for future research.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of fluence, beam overlap and aging on the wettability of pulsed Nd3+:YAG nanosecond laser-textured Cu and Al sheets

Y. Esther Blesso Vidhya et al.

Summary: This study demonstrates the fabrication of superhydrophobic and hydrophobic surfaces on Al and Cu metal sheets through laser processing and aging, without the need for additional chemical treatment. The influence of laser parameters on the surface textures and wettability, as well as the transition from hydrophilic to hydrophobic behavior over time, are analyzed. The experimental findings highlight the ability to control the wettability of Al and Cu sheets by adjusting laser parameters.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Slippery Antifouling Polysiloxane-Polyurea Surfaces with Matrix Self-Healing and Lubricant Self-Replenishing

Mengnan Yu et al.

Summary: A polysiloxane-polyurea slippery elastomer with lubricant self-replenishing and matrix self-healing properties was fabricated by encapsulating silicone oil into thermoplastic elastomers, showing unique mechanical properties and promising applications in surface protection, underwater antifouling, and drag reduction.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Surface ablation efficiency and quality of fs lasers in single-pulse mode, fs lasers in burst mode, and ns lasers

M. Domke et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS

Jithin James Marattukalam et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Engineering, Mechanical

Improving processing quality and tribological behavior of laser surface textures using oil layer method

Hui Zhang et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Mechanical

Effect of laser parameters on the tribological behavior of Ti6Al4V titanium microtextures under lubricated conditions

J. Salguero et al.

WEAR (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Surface Texturing in Machine Elements - A Critical Discussion for Rolling and Sliding Contacts

Andreas Rosenkranz et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Feasible fabrication of a wear-resistant hydrophobic surface

Sinong Xiao et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Bio-inspired graphene-based coatings on Mg alloy surfaces and their integrations of anti-corrosive/wearable performances

J. H. Chu et al.

CARBON (2019)

添加到收藏夹

Article Automation & Control Systems

An effective method of edge deburring for laser surface texturing of Co-Cr-Mo alloy

Junde Guo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Investigating the effect of picosecond laser texturing on microstructure and biofunctionalization of titanium alloy

Zhou Yu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Wettability and friction control of a stainless steel surface by combining nanosecond laser texturing and adsorption of superhydrophobic nanosilica particles

M. Conradi et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Engineering, Industrial

Spreadability studies of metal working fluids on tool surface and its impact on minimum amount cooling and lubrication turning

Bikash Chandra Behera et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Mechanical

Optimization of texture shape based on Genetic Algorithm under unidirectional sliding

Hui Zhang et al.

TRIBOLOGY INTERNATIONAL (2017)

添加到收藏夹

Article Engineering, Mechanical

A critical assessment of surface texturing for friction and wear improvement

C. Gachot et al.

WEAR (2017)

添加到收藏夹

Article Chemistry, Physical

Robust fabrication of μ-patterns with tunable and durable wetting properties: hydrophilic to ultrahydrophobic via a vacuum process

R. Jagdheesh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Progress in ultrafast laser processing and future prospects

Koji Sugioka

NANOPHOTONICS (2017)

添加到收藏夹

Article Physics, Applied

Stability of the oxygen vacancy induced conductivity in BaSnO3 thin films on SrTiO3

H. M. Iftekhar Jaim et al.

APPLIED PHYSICS LETTERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Internal and External Flow over Laser-Textured Superhydrophobic Polytetrafluoroethylene (PTFE)

K. M. Tanvir Ahmmed et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

How to guide lubricants - Tailored laser surface patterns on stainless steel

Philipp G. Gruetzmacher et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Chemistry, Physical

Quantitative analysis of Fe and Co in Co-substituted magnetite using XPS: The application of non-linear least squares fitting (NLLSF)

Hongmei Liu et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Review Engineering, Multidisciplinary

Surface texture metrology for metal additive manufacturing: a review

A. Townsend et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Friction and wear behavior analysis of the stainless steel surface fabricated by laser texturing underwater

Jun Hu et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Review Engineering, Mechanical

Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings

Daniel Gropper et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electron beam welding - Techniques and trends - Review

M. S. St Weglowski et al.

VACUUM (2016)

添加到收藏夹

Review Chemistry, Physical

Bio-Inspired Functional Surfaces Based on Laser-Induced Periodic Surface Structures

Frank A. Mueller et al.

MATERIALS (2016)

添加到收藏夹

Article Engineering, Chemical

A Study on the Tribological Behavior of Surface Texturing on Babbitt Alloy under Mixed or Starved Lubrication

H. Zhang et al.

TRIBOLOGY LETTERS (2014)

添加到收藏夹

Article Chemistry, Physical

Influence of the electrochemical reduction process on the performance of graphene-based capacitors

Hongwen Yu et al.

CARBON (2013)

添加到收藏夹

Review Optics

Direct femtosecond laser surface nano/microstructuring and its applications

Anatoliy Y. Vorobyev et al.

LASER & PHOTONICS REVIEWS (2013)

添加到收藏夹

Article Engineering, Chemical

Friction Properties of Lubricated Laser-MicroTextured-Surfaces: An Experimental Study from Boundary- to Hydrodynamic-Lubrication

Michele Scaraggi et al.

TRIBOLOGY LETTERS (2013)

添加到收藏夹

Review Engineering, Mechanical

Modeling of surface texturing in hydrodynamic lubrication

Izhak Etsion

FRICTION (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Texture control during laser deposition of nickel-based superalloy

G. P. Dinda et al.

SCRIPTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys

K. Spencer et al.

SURFACE & COATINGS TECHNOLOGY (2009)

添加到收藏夹

Article Physics, Condensed Matter

Wetting, adhesion and friction of superhydrophobic and hydrophilic leaves and fabricated micro/nanopatterned surfaces

Bharat Bhushan et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2008)

添加到收藏夹

Article Engineering, Mechanical

Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions

H. L. Costa et al.

TRIBOLOGY INTERNATIONAL (2007)

添加到收藏夹

Review Chemistry, Multidisciplinary

Design and creation of superwetting/antiwetting surfaces

Xinjian Feng et al.

ADVANCED MATERIALS (2006)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interaction of ester functional groups with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy

J van den Brand et al.

LANGMUIR (2004)

添加到收藏夹

Article Chemistry, Physical

Ce 3d XPS study of composite CexMn1-xO2-y wet oxidation catalysts

F Larachi et al.

APPLIED SURFACE SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.