4.8 Article

Engineering anion defects of ternary V-S-Se layered cathodes for ultrafast zinc ion storage

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Electrochemical activation strategy enabled ammonium vanadate cathodes for all-climate zinc-ion batteries

Kan Fang et al.

Summary: This research presents an electrochemical activation strategy to build high energy density ZIBs by designing a flexible cathode composed of NH4+ pillared ammonium vanadate nanosheets on carbon cloth (NVMCE@CC). The activated NVMCE@CC cathode delivers large areal capacity and superior cycling stability, and shows admirable performance in extreme situations.

NANO ENERGY (2023)

Article Chemistry, Physical

Layer symmetry and interlayer engineering of birnessites towards high-performance rechargeable aqueous Zn-MnO2 batteries

Jingyi Ding et al.

Summary: Rechargeable aqueous Zn-MnO2 batteries are promising for large-scale energy storage, but the issues of phase transition and structural collapse of MnO2 cathodes still exist. Intercalation of layered MnO2 has become the mainstream strategy, but the characteristics of Mn octahedral layers are often neglected. In this study, the researchers elucidate the impact of layer symmetry on the electrochemical performance of birnessites. The hexagonal birnessite with stabilized Mn(II) ions exhibits better charge storage performance than its monoclinic precursor, due to the generation of layer cation vacancies, interlayer Mn(II) ions, and nanosized morphology. The work provides a new approach for designing high-performance layered cathode materials.

NANO ENERGY (2023)

Article Chemistry, Applied

MnO2 cathode materials with the improved stability via nitrogen doping for aqueous zinc-ion batteries

Yanan Zhang et al.

Summary: The nitrogen-doped MnO2@N cathode prepared through defect engineering greatly improves the cycle stability of manganese-based aqueous zinc-ion batteries by enhancing conductivity and electrochemical stability, leading to a high capacity retention rate. In addition, nitrogen doping promotes the diffusion of H+ and Zn(2+), resulting in enhanced battery performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Physical

A novel TiSe2 (de)intercalation type anode for aqueous zinc-based energy storage

Li Wen et al.

Summary: Rechargeable zinc-based aqueous systems are attractive for energy storage technology due to their safety, low cost, and ecological friendliness. This study verifies the feasibility of using TiSe2 as an intercalated anode for aqueous zinc ion batteries and zinc ion hybrid supercapacitors. TiSe2 exhibits excellent electrical charge transport characteristics and demonstrates good performance in terms of capacity, working potential window, and recyclability.

NANO ENERGY (2022)

Article Nanoscience & Nanotechnology

Exploring the Efficient Na/K Storage Mechanism and Vacancy Defect-Boosted Li+ Diffusion Based on VSe2/MoSe2 Heterostructure Engineering

Jing Yang et al.

Summary: The design and optimization of the VSe2/MoSe2 heterostructure improve the efficiency of Li/Na/K-ion batteries by achieving fast ion diffusion kinetics. This breakthrough in interlayer diffusion could pave the way for developing anode materials with excellent electrochemical properties.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

Mn-doped ZnO microspheres as cathode materials for aqueous zinc ion batteries with ultrastability up to 10 000 cycles at a large current density

Juan Zhou et al.

Summary: By utilizing a temperature-regulation method, rough Mn-doped zinc oxide microspheres were prepared, featuring a structure rich in superfine nanoparticles and internal mesopores. This structure not only facilitates Zn2+ diffusion and alleviates stress, but also enhances electrical conductivity. Applied as a cathode material in ZIBs, the Mn-doped ZnO demonstrates excellent rate performance and cycle durability, showing potential for high energy storage applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Defect modulation of ZnMn2O4 nanotube arrays as high-rate and durable cathode for flexible quasi-solid-state zinc ion battery

Wenda Qiu et al.

Summary: The novel N-doping coupled oxygen vacancies modulated ZMO nanotube arrays (NTAs) exhibit excellent capacity, rate capability, and long-term durability as a high-performance cathode for rechargeable ZIBs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Nanohybrid engineering of the vertically confined marigold structure of rGO-VSe2 as an advanced cathode material for aqueous zinc-ion battery

Mugilan Narayanasamy et al.

Summary: The study successfully synthesized marigold-like rGO-VSe2 nanohybrids using a simple hydrothermal approach, which exhibited good performance as cathodes for ZIBs with high reversible potential and cycling stability. This innovative design addresses the efficiency and cycling stability issues of traditional ZIBs by improving conductivity and suppressing nanosheet electrostatic stacking.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Enhanced energy storage of aqueous zinc-carbon hybrid supercapacitors via employing alkaline medium and B, N dual doped carbon cathode

Lu Han et al.

Summary: An aqueous alkaline zinc-carbon hybrid supercapacitor (AZCHS) with an optimized design was proposed in this work, showing a high energy density of 115.7 Wh kg-1 at a power density of 711.6 W kg-1, with excellent stability. The optimized AZCHS is a promising candidate for energy storage applications.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Nanoscience & Nanotechnology

Electrochemical Injection Oxygen Vacancies in Layered Ca2Mn3O8 for Boosting Zinc-Ion Storage

Lipeng Wang et al.

Summary: Manganese-based compounds have shown promise as cathode materials for zinc-ion batteries due to their high operating voltage and large specific capacity, but their structural collapse and slow kinetics have posed challenges. A novel layered Ca2Mn3O8 material with low ion diffusion barrier and high structural stability was developed through an electrochemical charging process, significantly enhancing the battery's performance through increased electrochemical active area and improved zinc ions diffusion coefficient. This study provides an effective method for vacancy regulation in electrode materials, offering new possibilities for improving the electrochemical performance of zinc-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Applied

A porous puckered V2O5 polymorph as new high performance cathode material for aqueous rechargeable zinc batteries

Dauren Batyrbekuly et al.

Summary: In this study, the porous layered puckered gamma'-V2O5 polymorph was introduced as a cathode for aqueous zinc batteries, exhibiting high capacity and cycling stability in a binary Zn2+/Li+ electrolyte. The work reveals a reaction mechanism based on selective Li insertion and gradual phase transformation to Zn pyrovanadate ZVO during cycling, explaining the high electrochemical performance of the system. This study highlights the superiority of gamma'-V2O5 over conventional alpha-V2O5 in terms of capacity and performance.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Selenium Defect Boosted Electrochemical Performance of Binder-Free VSe2 Nanosheets for Aqueous Zinc-Ion Batteries

Youcun Bai et al.

Summary: In this study, VSe2 nanosheets supported on stainless-steel with defects were synthesized through a hydrothermal reduction strategy, resulting in improved conductivity and activity. The Se defect was found to adjust the adsorption energy of Zn2+ ions, leading to enhanced reversibility and electrochemical performance of the Zn// VSe2-x-SS battery. The VSe2-x-SS electrode exhibited good specific capacity, rate performance, and cyclic stability, providing insights into the energy-storage mechanism of Zn2+ ions in this material for future electrode design.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Engineering porous structure in Bi-component-active ZnO quantum dots anchored vanadium nitride boosts reaction kinetics for zinc storage

Youcun Bai et al.

Summary: By employing a self-sacrificial strategy for pore engineering, a bi-component-active ZnO-QDs-VN-0.5 electrode was designed to optimize ion transfer rate and achieve satisfactory electrochemical performance.

NANO ENERGY (2021)

Article Chemistry, Physical

2D gallium molybdenum selenide grown on a hollow carbon nanofibrous aerogel for high-efficiency electroreduction of nitrogen: Optimized basal plane activity via selenium vacancy modulation

Meng Zhang et al.

Summary: A novel compound with modulable Se vacancies was synthesized by incorporating two types of 2D chalcogenides, leading to enhanced catalytic activity for N-2 fixation. Additionally, a porous and conductive hollow carbon nanofibrous aerogel was synthesized for the first time, providing an ideal matrix for the growth of the compound and contributing to improved catalytic performance.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Engineering, Environmental

Oxygen vacancy-rich, binder-free copper pyrovanadate for zinc ion storage

Youcun Bai et al.

Summary: By introducing oxygen vacancies, the electrochemical performance of vanadium oxide compounds was improved, enhancing conductivity and interfacial activity, promoting reaction kinetics, and achieving superior cyclic stability and high specific capacity. Vacancy design proved to be an effective strategy for obtaining electrode materials with excellent comprehensive properties.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Boosting zinc ion energy storage capability of inert MnO cathode by defect engineering

Peifeng Yu et al.

Summary: This study successfully activated the electrochemical inertness of MnO by introducing nitrogen dopant and oxygen vacancy, significantly enhancing its zinc ion storage capacity. Experimental results showed that this defect engineering strategy enabled MnO to exhibit high specific capacity, superb rate capability, prolonged cycling stability, and attractive energy density.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Oxygen defect enriched (NH4)2V10O25.8H2O nanosheets for superior aqueous zinc-ion batteries

Jin Cao et al.

Summary: In this study, an advanced cathode material (NH4)2V10O25.8H2O (NVOD) with oxygen defects was reported for aqueous zinc-ion batteries, demonstrating excellent performance including high capacity, ultrahigh stability, and exceptional energy density, showing great potential for future applications.

NANO ENERGY (2021)

Article Chemistry, Physical

Defect engineering via the F-doping of β-MnO2 cathode to design hierarchical spheres of interlaced nanosheets for superior high-rate aqueous zinc ion batteries

Seoyeong Kim et al.

Summary: A hierarchical beta-MnO2 cathode material with interlaced nanosheets spheres was introduced through efficient defect engineering using fluorine (F)-doping and oxygen vacancies, improving ion insertion, transport kinetics, and electrical conductivity in ZIB. This resulted in a high energy density, superior high-rate performance, and good capacity retention, highlighting the potential of defect-engineered cathode materials for enhanced electrochemical performance in rechargeable aqueous batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

A VS2@N-doped carbon hybrid with strong interfacial interaction for high-performance rechargeable aqueous Zn-ion batteries

Jiapeng Liu et al.

Summary: This study presents a novel approach to prepare spindle-like vanadium disulfide (VS2) nanocrystals on a nitrogen-doped carbon layer, which exhibits outstanding electrochemical performance as a cathode material for rechargeable aqueous zinc-ion batteries. The strong interfacial interaction between VS2 and N-doped carbon contributes to its high specific capacity and impressive long-term cycling stability, providing a new prospect for developing better cathodes for aqueous rechargeable Zn-ion batteries.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Engineering, Environmental

Effect of fluorine doping and sulfur vacancies of CuCo2S4 on its electrochemical performance in supercapacitors

Ling Kang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Nanoscience & Nanotechnology

Boosting Zn-Ion Storage Performance of Bronze-Type VO2 via Ni-Mediated Electronic Structure Engineering

Yi Cai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Reversible V3+/V5+ double redox in lithium vanadium oxide cathode for zinc storage

Pan He et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

VS4 with a chain crystal structure used as an intercalation cathode for aqueous Zn-ion batteries

Qiancheng Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Layered VSe2: a promising host for fast zinc storage and its working mechanism

Lili Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

MoS2 nanosheets with expanded interlayer spacing for rechargeable aqueous Zn-ion batteries

Hongfei Li et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Zn/MnO2 Battery Chemistry With H+ and Zn2+ Coinsertion

Wei Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Physical

Layered VS2 Nanosheet-Based Aqueous Zn Ion Battery Cathode

Pan He et al.

ADVANCED ENERGY MATERIALS (2017)