☆ 4.7 Article

A multi-fidelity data-driven model for highly accurate and computationally efficient modeling of short fiber composites

COMPOSITES SCIENCE AND TECHNOLOGY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

A micromechanics-based recurrent neural networks model for path-dependent cyclic deformation of short fiber composites

J. Friemann et al.

Summary: In this study, a recurrent deep neural network model is trained to predict the path-dependent elasto-plastic stress response of SFRCs, given the microstructural parameters and the strain path. The model gives very accurate predictions in a computationally efficient manner when compared with independent micromechanical simulations.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2023)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

A State-of-the-Art Review on Machine Learning-Based Multiscale Modeling, Simulation, Homogenization and Design of Materials

Dana Bishara et al.

Summary: Multiscale simulation and homogenization are essential computational technologies in material modeling and design, but their adoption in the industrial sector has been limited due to high computational cost. The rapid advancements in artificial intelligence and machine learning have provided new solutions to enhance the computational efficiency and accuracy of multiscale simulations.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2023)

添加到收藏夹

Article Mechanics

A multiscale deep learning model for elastic properties of woven composites

E. Ghane et al.

Summary: In the analysis of multiscale composite materials, combining neural networks and multiscale modeling can replace time-consuming micromechanical finite element analysis, improving computational efficiency and accuracy.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Recurrent Neural Networks (RNNs) with dimensionality reduction and break down in computational mechanics; application to multi-scale localization step

Ling Wu et al.

Summary: This study develops Recurrent Neural Networks (RNNs) as surrogate models of RVE response while preserving the evolution of local micro-structure state variables. Several surrogate models based on dimensionality reduction are proposed and compared, and the training strategy is optimized to enhance GPU usage. Additionally, the connection between physical state variables and hidden variables of RNN is revealed and utilized in selecting hyperparameters for RNN-based surrogate models at the design stage.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the importance of self-consistency in recurrent neural network models representing elasto-plastic solids

Colin Bonatti et al.

Summary: This study explores the use of recurrent neural networks as surrogate material models, introducing a new architecture LMSC to address the limitations of existing approaches, demonstrating optimal performance in long sequence applications.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)

添加到收藏夹

Article Engineering, Mechanical

An FE-based orientation averaging model for elasto-plastic behavior of short fiber composites

S. M. Mirkhalaf et al.

Summary: A new micro-mechanical model is proposed to predict the non-linear elasto-plastic behavior of short fiber reinforced composites. The model is based on a two-step Orientation Averaging method and can accommodate a wide range of micro-structural parameters. Comparisons to experiments and numerical simulations show that the model provides accurate predictions. Additionally, the model is computationally efficient and can be used in applications with different fiber orientations.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructure-guided deep material network for rapid nonlinear material modeling and uncertainty quantification

Tianyu Huang et al.

Summary: This paper presents a deep-learning-based approach called microstructure-guided deep material network (MgDMN) for efficient prediction of the mechanical response of multi-phase materials under various loading paths and microstructures. The proposed method parameterizes the microstructure space, maps a set of deep material networks (DMNs) to their respective microstructure parameters, and uses interpolation to generate new models. The MgDMN achieves high efficiency and accuracy, enabling complex structural simulations and nonlinear stochastic analyses with uncertain microstructures.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Engineering, Manufacturing

A computationally efficient coupled multi-scale model for short fiber reinforced composites

B. A. Castricum et al.

Summary: A coupled multi-scale model is developed to predict the non-linear elasto-plastic behavior of short fiber reinforced composites. The model incorporates a micro-mechanical model based on a two-step orientation averaging approach at the microscopic level and a Finite Element model at the macroscopic level. The model shows good predictive capability and computational efficiency improvements.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

A review of artificial neural networks in the constitutive modeling of composite materials

Xin Liu et al.

Summary: Machine learning models, especially artificial neural networks, are increasingly used in engineering fields. However, there are still unsolved issues hindering the acceptance of ANN models in the practical design and analysis of composite materials. The emerging machine learning techniques pose both new opportunities and challenges in the data-based design paradigm.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

An FE-DMN method for the multiscale analysis of short fiber reinforced plastic components

Sebastian Gajek et al.

Summary: This work proposes a fully coupled multiscale strategy for components made from short fiber reinforced composites, utilizing deep material networks (DMNs) and a simplified sampling strategy to significantly improve simulation efficiency. The effectiveness of the approach is demonstrated on an injection molded quadcopter frame.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the potential of recurrent neural networks for modeling path dependent plasticity

Maysam B. Gorji et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A recurrent neural network-accelerated multi-scale model for elasto-plastic heterogeneous materials subjected to random cyclic and non-proportional loading paths

Ling Wu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A finite element based orientation averaging method for predicting elastic properties of short fiber reinforced composites

S. M. Mirkhalaf et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A deep material network for multiscale topology learning and accelerated nonlinear modeling of heterogeneous materials

Zeliang Liu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics

Frederic E. Bock et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Transfer learning of deep material network for seamless structure-property predictions

Zeliang Liu et al.

COMPUTATIONAL MECHANICS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Self-consistent clustering analysis for multiscale modeling at finite strains

Cheng Yu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exploring the 3D architectures of deep material network in data-driven multiscale mechanics

Zeliang Liu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Deep learning predicts path-dependent plasticity

M. Mozaffar et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructural material database for self-consistent clustering analysis of elastoplastic strain softening materials

Zeliang Liu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Generation of 3D representative volume elements for heterogeneous materials: A review

Swantje Bargmann et al.

PROGRESS IN MATERIALS SCIENCE (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

A finite element perspective on nonlinear FFT-based micromechanical simulations

J. Zeman et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Reduced order modeling strategies for computational multiscale fracture

J. Oliver et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Computational homogenization of elasticity on a staggered grid

Matti Schneider et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2016)

添加到收藏夹

Article Mathematics, Applied

Determination of the size of the Representative Volume Element (RVE) for the simulation of heterogeneous polymers at finite strains

S. M. Mirkhalaf et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2016)

添加到收藏夹

Article Mechanics

Numerical evaluation of effective elastic properties of composites reinforced by spatially randomly distributed short fibers with certain aspect ratio

Lehua Qi et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Representative volume element for composites reinforced by spatially randomly distributed discontinuous fibers and its applications

Wenlong Tian et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Composites

Effects of different fibers on the properties of short-fiber-reinforced polypropylene composites

Christoph Unterweger et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

A multiscale approach for modeling progressive damage of composite materials using fast Fourier transforms

J. Spahn et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Reduced basis hybrid computational homogenization based on a mixed incremental formulation

Felix Fritzen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

添加到收藏夹

Article Engineering, Manufacturing

First pseudo-grain failure model for inelastic composites with misaligned short fibers

S. Kammoun et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Engineering, Mechanical

Micromechanical simulations of biaxial yield, hardening and plastic flow in short glass fiber reinforced polyamide

A. Selmi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2011)

添加到收藏夹

Article Engineering, Mechanical

A second-moment incremental formulation for the mean-field homogenization of elasto-plastic composites

I. Doghri et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Materials Science, Composites

Nonuniform transformation field analysis of elastic-viscoplastic composites

S. Roussette et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Mechanics

Representative volume: Existence and size determination

I. M. Gitman et al.

ENGINEERING FRACTURE MECHANICS (2007)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

The reduced model multiscale method (R3M) for the non-linear homogenization of hyperelastic media at finite strains

J. Yvonnet et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2007)

添加到收藏夹

Article Mechanics

Determination of the size of the representative volume element for random composites: statistical and numerical approach

T Kanit et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

添加到收藏夹

Article Mechanics

Nonuniform transformation field analysis

JC Michel et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.