☆ 4.7 Article

Revealing bimetallic synergy in van der Waals AgInP2Se6 nanosheets for alkali metal ion battery electrodes

JOURNAL OF ENERGY STORAGE (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Terminal Group-Oriented Self-Assembly to Controllably Synthesize a Layer-by-Layer SnSe2 and MXene Heterostructure for Ultrastable Lithium Storage

Xianglong Kong et al.

Summary: In this study, a terminal group-oriented self-assembly strategy was designed to synthesize a homogeneous layer-by-layer SnSe2 and MXene heterostructure. The heterostructure exhibited adjustable electronic structure, fast electron/ions transfer kinetics, and robust architectures, making it attractive for applications in rechargeable batteries, photo/electrocatalysis, and supercapacitors.

SMALL (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biomass Alginate Derived Oxygen-Enriched Carbonaceous Materials with Partially Graphitic Nanolayers for High Performance Anodes in Lithium-Ion Batteries

Xiaolei Sun et al.

Summary: In this study, oxygen-doped hierarchically porous carbons with partially graphitic nanolayers were synthesized from pyrolyzed Na-alginate biopolymers. The as-prepared Alg-C electrodes showed outstanding electrochemical features as lithium storage anodes, including high-rate capability and extended cycling lifetimes over 5000 cycles.

NANOMATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Excellent Metal Phosphide Electrode for Potassium Ion Hybrid Capacitors: The Case of Carbon Nanotube-Wrapped AgP2

Jia-Zheng Yen et al.

Summary: In this work, carbon nanotube-wrapped AgP2 was synthesized via wet-ball milling and used to prepare electrode slurry. The in situ formed Ag nanocrystals increased the electrical conductivity and formed Ag-P composites that easily adsorbed more K+. The CNT framework effectively reduced capacity fading caused by material refinement, and provided a large surface area for electrolyte penetration. The assembled PIHC showed a high energy/power density and remarkable cycling life. These promising results demonstrate the potential of CNT-wrapped AgP2 scaffold in the development of metal phosphide-based hybrid capacitors.

ACS APPLIED ENERGY MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Quasi-Solid Aqueous Electrolytes for Low-Cost Sustainable Alkali-Metal Batteries

Xianhui Yi et al.

Summary: Aqueous electrolytes are essential for batteries due to their sustainability, greenness, and low cost. However, the reactivity of water molecules with alkali metals limits the use of high-capacity alkali-metal anodes. In this study, water molecules are confined in a carcerand-like network to create quasi-solid aqueous electrolytes (QAEs) that effectively overcome the limitations of free water molecules. The QAEs allow stable operation with alkali-metal anodes, suppressing issues such as dendrite growth, electrode dissolution, and polysulfide shuttle. The research demonstrates long-term cycling and high Coulombic efficiency of alkali-metal cells in a water-based environment, as well as the potential of full metal batteries with remarkable energy density.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Two dimensional MnPSe3 layer stacking composites with superior storage performance for alkali metal-ion batteries

Yan-Fu Huang et al.

Summary: A 2D/2D composite consisting of few layer MnPSe3 nanosheets and graphite was prepared through a high energy ball milling method. The unique 2D/2D layer nanostructures can effectively overcome the severe aggregation during charge/discharge cycles. The MnPSe3/graphite composite shows promising performance in alkali ion batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

3D ordered hierarchically porous carbon derived from colloidal crystal templates towards alkali metal-ion batteries

Chengwei Zhang et al.

Summary: Carbon materials, especially 3D ordered hierarchically porous carbon (3D OHPC) materials templated from colloidal crystals, have shown great potential as electrode materials for electro-chemical energy storage devices. This review provides a comprehensive overview of the synthetic strategies, main features, and recent progresses in the alkali-metal ion batteries based on 3D OHPC. It also highlights the current challenges and prospects for the applications of 3D OHPC in alkali-metal ion batteries.

CARBON (2023)

添加到收藏夹

Article Engineering, Environmental

Construction of strongly coupled few-layer FePSe3-CNT hybrids for high performance potassium-ion storage devices

Yan-Fu Huang et al.

Summary: Few-layer FePSe3-carbon nanotube hybrids prepared by mechanical exfoliation exhibit high capacity, rate, and cycling stability as potassium-ion storage anodes, exceeding the performance of its binary analogue FeSe. This work provides a universal strategy for effectively activating the K+ electrochemical performance on a wide range of layered materials.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Environmental

Synergistic engineering of structural and electronic regulation of In2Se3 for ultrastable Li- ion battery

Guanhua Zhang et al.

Summary: In this study, a facile construction strategy for metal-organic frameworks (MOFs)-derived In2Se3 nanocrystals encapsulated in a porous nitrogen-doped carbon conductive matrix (In2Se3/PNC) was developed. The In2Se3/PNC exhibited a porous structure and abundant N-doped carbon, providing effective channels for the rapid transportation of ions and electrons. The optimized In2Se3/PNC-800 electrode showed a high capacity, remarkable cycling stability, and comparable high-rate capability.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Physical

Boosting cobalt ditelluride quantum-rods anode materials for excellent potassium-ion storage via hierarchical physicochemical encapsulation

Qianwen Zhou et al.

Summary: In this study, ultrafine CoTe2 quantum rods encapsulated by graphene and nitrogen-doped carbon (CoTe2@rGO@NC) were used as anode materials for potassium-ion batteries. The dual physicochemical confinement and quantum size effect improved the electrochemical kinetics and reduced lattice stress during the insertion/extraction of potassium ions. CoTe2@rGO@NC showed excellent electronic conductivity, potassium ion adsorption, and diffusion ability, as confirmed by first-principles calculations and kinetics study. The conversion mechanism with Co as the redox site and the strong C-O-Co bond played important roles in maintaining the electrode stability. CoTe2@rGO@NC exhibited a high initial capacity of 237.6 mAh·g(-1) at 200 mA·g(-1) and a long cycle life with low-capacity decay of 0.10% per cycle. This research is significant for the development of quantum-rod electrodes.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

3D space-confined Co0.85Se architecture with effective interfacial stress relaxation as anode material reveals robust and highly loading potassium-ion batteries

Wei-Wen Shen et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

SnTe nanoparticles physicochemically encapsulated by double carbon as conversion-alloying anode materials for superior potassium-ion batteries

Ting Li et al.

Summary: SnTe@rGO@NC, formed by wrapping SnTe nanoparticles with graphene and nitrogen-doped carbon, improves the performance of potassium-ion batteries. It exhibits good interfacial stability, electron transmission, and adsorption and diffusion of potassium ions. Experimental results demonstrate its high initial charge capacity, superior rate performance, and outstanding cyclic stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Covalent Organic Framework Electrode Materials for Alkali Metal-Ion Batteries

Jianlu Sun et al.

Summary: Due to the limitations of traditional electrode materials in alkalimetal-ion batteries (AIBs), the development of new electrode materials is crucial. Covalent organic frameworks (COFs) are porous polymers with organic building blocks bonded through covalent bonds, offering high designability, regular channels, and stable topology. This review discusses the characteristics, challenges, reaction types, and active sites of COF electrodes, and emphasizes the importance of structure, morphology, size, and conductivity design for efficient COF electrode materials in AIBs.

CCS CHEMISTRY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simultaneous Catalytic Acceleration of White Phosphorus Polymerization and Red Phosphorus Potassiation for High-Performance Potassium-Ion Batteries

Hai Yang et al.

Summary: By using I2 as a catalyst, the polymerization process of white phosphorus can be accelerated and the alloying reaction of red phosphorus can be enhanced, leading to improved cycling stability and rate performance of potassium-ion batteries.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Designing water/air-stable Co-free high-entropy oxide cathodes with suppressed irreversible phase transition for sodium-ion batteries

Yuzhen Dang et al.

Summary: In this study, a new Co-free high-entropy oxide layered cathode NaFe0.2Cu0.1Ni0.2Mn0.3Ti0.2O2 is proposed, which enhances reversible phase transition, improves air stability, and reduces cost. The HEO cathode shows excellent sodium-ion storage performance and cycling stability, as well as enhanced water resistance. The high-entropy design suppresses irreversible phase transformation and exhibits fast Na+ diffusion kinetics.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Engineering, Environmental

Dual-strategy coupling driven versatile carbon-based anode for potassium-ion/potassium metal storage

Xiaohua Shen et al.

Summary: Reasonably constructed carbon-based electrodes play a crucial role in high-performance potassiumion and potassium metal batteries. We developed a Tetramethylol Acetylenediurea derived versatile carbon with rational design, which showed excellent kinetics, stability, and multi-pronged active sites. The in situ characterizations and theory calculations further revealed the fundamentals of storage mechanisms, enabling high rate capability, long-term cycling performance, high areal capacity, and low potassium nucleation overpotential for the carbon electrode.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Trimming the Degrees of Freedom via a K+ Flux Rectifier for Safe and Long-Life Potassium-Ion Batteries

Xianhui Yi et al.

Summary: To improve the ionic conductivity and safety of potassium-ion batteries, researchers developed a K+ flux rectifier that limits the degree of freedom for K+ movement. The rectifier improved the electrochemical performance of the batteries, enhancing oxidation stability, inhibiting dendrite formation and organic cathode dissolution. The K||K cells cycled continuously for over 3,700 hours, K||Cu cells operated stably for 800 cycles with a Coulombic efficiency exceeding 99%, and K||graphite cells showed high capacity retention after 1,500 cycles. The organic cathodes operated for over 2,100 cycles and showed no significant capacity fading after 100 cycles in a pouch cell.

NANO-MICRO LETTERS (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in Covalent Organic Framework Electrode Materials for Alkali Metal-Ion Batteries

Jianlu Sun et al.

Summary: Due to the limitations of traditional electrode materials in alkali metal-ion batteries, the development of new electrode materials is particularly important. Covalent organic frameworks (COFs) have emerged as promising candidates due to their unique characteristics such as high designability and regular channels. Since the first report in 2015, research on COF electrode materials has made continuous progress and breakthroughs. This review introduces the characteristics and challenges of COF electrode materials and provides insights for their design and application in high-efficiency alkali metal-ion batteries.

CCS CHEMISTRY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crystal Facet and Architecture Engineering of Metal Oxide Nanonetwork Anodes for High-Performance Potassium Ion Batteries and Hybrid Capacitors

Chao-Hung Chang et al.

Summary: Metal oxide anodes have poor electrochemical performance in potassium ion batteries due to their wide band gaps and deficient ion-transport kinetics. In this study, crystal facet and architecture engineering of metal oxides are used to enhance the potassium ion storage performance. The nanonetwork anodes of bismuth antimonate show outstanding capacity, cycling life, and rate capability. This study proposes a promising avenue to design advanced hierarchical nanostructures for potassium ion batteries and hybrid capacitors.

ACS NANO (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning Mixed Electronic/Ionic Conductivity of 2D CdPS3 Nanosheets as an Anode Material by Synergistic Intercalation and Vacancy Engineering

Xuebiao Yang et al.

Summary: In this study, 2D Cd1-xPS3Li2x nanosheets with enhanced mixed electronic/ionic conductivity were synthesized by the intercalation and vacancy strategy. The electrode exhibited excellent electrochemical performance as an anode in lithium-ion batteries, and the strategy can be extended to the research of other MPTCs compounds.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Revisiting the Roles of Natural Graphite in Ongoing Lithium-Ion Batteries

Liang Zhao et al.

Summary: This article provides a comprehensive overview of the origin, roles, and research progress of NG-based materials in ongoing LIBs. It covers the structure, properties, electrochemical performance, modification methods, derivatives, composites, and applications of NG. The strategies to improve their high-rate and low-temperature charging performance are also discussed, along with prospects for the development and future applications of NG-based materials.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Physics, Applied

Rational design of Fe-doped K0.8Ti1.73Li0.27O4@rGO as a high-rate and long-cycle-life anode for lithium-ion batteries

Lijuan Hou et al.

Summary: K0.8Ti1.73Li0.27O4 (KLTO) is an important titanium-based anode material for lithium-ion batteries (LIBs) that could replace carbonaceous materials due to its nontoxicity, low cost, and high safety performance. A Fe-doped KLTO@rGO (Fe-KLTO@rGO) composite was prepared and exhibited excellent high-rate and long-cycle-life performance as an anode in LIBs. The Fe-KLTO@rGO composite sample showed high specific capacity and stability.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium Storage Performance Boosted via Delocalizing Charge in ZnxCo1-xPS3/CoS2 of 2D/3D Heterostructure

Hou-Yang Zhong et al.

Summary: A promising anode material with a 2D/3D heterostructure of bimetallic thiophosphate ZnxCo1-xPS3 and CoS2 has been designed and prepared by effective chemical transformation. The material demonstrates outstanding performance in lithium storage applications, indicating great potential in practical rechargeable battery applications.

SMALL (2022)

添加到收藏夹

Article Engineering, Environmental

Realization of Sn2P2S6-carbon nanotube anode with high K+/Na+ storage performance via rational interface manipulation-induced shuttle-effect inhibition and self-healing

Safa Haghighat-Shishavan et al.

Summary: In this study, a Mott-Schottky-type Sn2P2S6-carbon nanotube heterojunction was synthesized as the anode material for K-ion batteries and Na-ion batteries. The constructed built-in electric fields improved the electronic properties of the electrode materials and prevented detrimental reactions, while also enabling reversible self-healing and regeneration.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

In-situ fabrication of active interfaces towards FeSe as advanced performance anode for sodium-ion batteries

Shige Wang et al.

Summary: This study demonstrates a confined-regulated interfacial engineering strategy for the synthesis of FeSe@NC. The strong interfacial interaction between FeSe and NC endows FeSe@NC with excellent electron/sodium transport kinetics and structural stability, resulting in outstanding rate capability and cycling stability. The sodium storage mechanism of FeSe@NC is also revealed, and the potential applications of FeSe@NC in high-performance sodium ion batteries are demonstrated.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultra-narrow Bandgap Se-Deficient Bimetallic Selenides for High Performance Alkali Metal-Ion Batteries

Tao Yang et al.

Summary: This study reports a dual-metal selenide nanoparticle material that alters crystal structure defects, improves the cycle stability and charge-discharge rate of alkali metal-ion batteries, and is of great significance for the practical development of these batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Regulation of ferric iron vacancy for Prussian blue analogue cathode to realize high-performance potassium ion storage

Zeyu Wang et al.

Summary: This study successfully synthesized PBAs cathode materials with high reversibility and cycling stability by introducing ethylenediaminetetraacetic acid dipotassium salt as a chelating agent. The presence of FeIII vacancies inhibits the movement of Fe-C bonds and reduces lattice distortion, leading to improved performance of PBAs.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bottom-Up Construction of Fluorene-Based Porous Aromatic Frameworks for Ultrahigh-Capacity and High-Rate Alkali Metal-Ion Batteries

Shuai Zhao et al.

Summary: This study synthesized a series of fluorene-based PAFs and used them as cation-hosting organic anode materials in energy storage systems. Experimental characterizations showed that PAFs with larger micropore volume, higher specific surface area, and more radicals exhibited better redox activity and electrochemical performance. Specifically, PAF-202 demonstrated ultrahigh reversible capacity, impressive cyclability, and extraordinary high-rate capability as an anode material in lithium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Silver boosts ultra-long cycle life for metal sulfide lithium-ion battery anodes: Taking AgSbS2 nanowires as an example

Sheng-Feng Ho et al.

Summary: By using AgSbS2 nanowires as anode materials, a record-breaking long cycle life for metal sulfide anodes has been achieved. The presence of Ag enhances the electrochemical performance by improving conductivity, ion diffusion rate, and adsorption capability, while reducing the shuttling effect of sulfur. This research has significant implications for the future development of metal sulfide anodes.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Phosphorus-Based Materials for High-Performance Alkaline Metal Ion Batteries: Progress and Prospect

Linchao Zeng et al.

Summary: Alkaline metal-ion batteries (AIBs) have potential as energy storage systems, but the performance needs improvement. Phosphorus-based (P-based) materials offer promising solutions for cathodes, anodes, and electrolytes. This paper discusses the latest developments, challenges, and new directions in P-based materials for AIBs.

SMALL (2022)

添加到收藏夹

Review Chemistry, Physical

Hexacyanoferrate-Type Prussian Blue Analogs: Principles and Advances Toward High-Performance Sodium and Potassium Ion Batteries

Aijun Zhou et al.

Summary: This review discusses the research progress on HCF-type cathode materials, focusing on their structural features, redox mechanisms, synthesis control, and modification strategies for improved performance in NIBs and KIBs. The use of HCFs in these battery systems offers specific capacity and voltage advantages, with ongoing efforts to enhance their material properties and promote future design of PBAs for advanced rechargeable batteries.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

The layered cadmium phosphorus trichalcogenides nanosheet with anion mono-doping: A new candidate for solar-driven water splitting

He Li et al.

Summary: Layered metal phosphorus trichalcogenides are being reconsidered as promising candidates for hydrogen evolution reaction photocatalysts due to their high tunability, with cadmium phosphorus trisulfide identified as a notable example. An N-doped CdPS3 nanosheet has been reported as a viable candidate for visible light hydrogen production, showing remarkable stability and comparable yield to other MPCh(3) photocatalysts. Insights into the electronic structure of this novel material are provided.

CHEMICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of Particle Size and Anion Vacancy on Electrochemical Potassium Ion Insertion into Potassium Manganese Hexacyanoferrates

Tomooki Hosaka et al.

Summary: Potassium manganese hexacyanoferrate (KMnHCF) can be used as a positive electrode for potassium-ion batteries due to its high energy density. The performance of KMnHCF in terms of capacity and rate capability is influenced by particle size and anion vacancies. Anion vacancies contribute to the enhancement of K+ ion diffusion and ultimately improve the electrochemical performance of KMnHCF.

CHEMSUSCHEM (2021)

添加到收藏夹

Article Chemistry, Physical

Tuning the electronic and optical properties of two-dimensional AgBiP2Se6 and AgInP2Se6 Janus monolayers

Cheng-gong Zhang et al.

Summary: Single-layer AgBiP2Se6 and AgInP2Se6 are stable semiconductors with excellent solar energy conversion potential in the visible light region. The transition between indirect and direct band gaps and optical red shift can be achieved through strains engineering.

CHEMICAL PHYSICS LETTERS (2021)

添加到收藏夹

Review Chemistry, Physical

Emerging Catalysts to Promote Kinetics of Lithium-Sulfur Batteries

Peng Wang et al.

Summary: This article summarizes the latest advances in emerging catalytic candidates for lithium-sulfur batteries (LSBs), including the use of traditional metal-based materials and novel catalytic materials to improve LSB performance. New insights are also presented, such as strategies like exposing active sites and adsorption-catalysis synergy, to aid in designing high-performance LSBs.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Growth of lithium-indium dendrites in all-solid-state lithium-based batteries with sulfide electrolytes

Shuting Luo et al.

Summary: This study investigates the growth of Li-In dendritic structures in all-solid-state lithium-based batteries and the resulting short circuits, highlighting the differences between Li-In dendrites and lithium dendrites, as well as discussing the instability of Li-In electrodes towards sulfide solid electrolytes.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rational Passivation of Sulfur Vacancy Defects in Two-Dimensional Transition Metal Dichalcogenides

Hope Bretscher et al.

Summary: A simple chemical treatment has been found to passivate sulfur vacancy defects in monolayer transition metal dichalcogenides, leading to a 275-fold increase in photoluminescence. These defects, acting as exciton traps, can be controlled to improve and regulate carrier mobility in a tunable manner.

ACS NANO (2021)

添加到收藏夹

Article Engineering, Environmental

A synergetic SnSb-amorphous carbon composites prepared from polyesterification process as an ultrastable potassium-ion battery anode

Yi-Yen Hsieh et al.

Summary: The synthesis of SnSb@MAC composite as the anode for potassium ion batteries showed excellent electrochemical performance, with long cycle life and high storage capacity. In particular, the composite demonstrated a reversible capacity of around 200 mA h g(-1) after 5000 cycles, and the K+-transport mechanism was experimentally verified to show high synergy between SnSb and MAC.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Carbon materials for ion-intercalation involved rechargeable battery technologies

Gang Wang et al.

Summary: The ever-increasing energy demand has driven the research on inexpensive, safe, scalable, and high-performance rechargeable batteries, with carbon materials being extensively studied as electrode materials. Carbon materials can serve as ideal anodes for 'Rocking-Chair' alkali metal-ion batteries and also show potential for dual-ion battery and Al-ion battery technologies. Significant advances have been made in understanding the porous structure, chemical composition, and interlayer spacing control of carbon materials as cation and anion hosts, with a focus on developing novel carbon nanostructures and carbon-derived energy storage devices.

CHEMICAL SOCIETY REVIEWS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Alloy Engineering in Few-Layer Manganese Phosphorus Trichalcogenides for Surface-Enhanced Raman Scattering

Xiangyu Hou et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Black Phosphorus-Graphite Composite Anode for Li-/Na-/K-Ion Batteries

Hongchang Jin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Borophene Concentric Superlattices via Self-Assembly of Twin Boundaries

Liren Liu et al.

NANO LETTERS (2020)

添加到收藏夹

Editorial Material Chemistry, Physical

Spinning up quantum defects in 2D materials

M. E. Turiansky et al.

NATURE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Extra lithium-ion storage capacity enabled by liquid-phase exfoliated indium selenide nanosheets conductive network

Chuanfang (John) Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Transition metal dichalcogenides for alkali metal ion batteries: engineering strategies at the atomic level

Biao Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Few-Layered Tin Sulfide Nanosheets Supported on Reduced Graphene Oxide as a High-Performance Anode for Potassium-Ion Batteries

Lingzhe Fang et al.

SMALL (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review of Metal Catalysts for Oxygen Reduction Reaction: From Nanoscale Engineering to Atomic Design

Xiaoqian Wang et al.

CHEM (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

ReS2-Based electrode materials for alkali-metal ion batteries

Xuan Xie et al.

CRYSTENGCOMM (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tunable Out-of-Plane Piezoelectricity in Thin-Layered MoTe2 by Surface Corrugation-Mediated Flexoelectricity

Seunghun Kang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Metallic Graphene-Like VSe2 Ultrathin Nanosheets: Superior Potassium-Ion Storage and Their Working Mechanism

Chao Yang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-electron reaction materials for sodium-based batteries

Feixiang Wu et al.

MATERIALS TODAY (2018)

添加到收藏夹

Article Medicine, Research & Experimental

Graphene oxide sensitizes cancer cells to chemotherapeutics by inducing early autophagy events, promoting nuclear trafficking and necrosis

Kuan-Chen Lin et al.

THERANOSTICS (2018)

添加到收藏夹

Review Chemistry, Applied

Two-dimensional organic cathode materials for alkali-metal-ion batteries

Chao Zhang et al.

JOURNAL OF ENERGY CHEMISTRY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bamboo-Like Hollow Tubes with MoS2/N-Doped-C Interfaces Boost Potassium-Ion Storage

Baorui Jia et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Hexagonal Boron Nitride/Blue Phosphorene Heterostructure as a Promising Anode Material for Li/Na-Ion Batteries

Jinna Bao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conductivity and Pseudocapacitance Optimization of Bimetallic Antimony-Indium Sulfide Anodes for Sodium-Ion Batteries with Favorable Kinetics

Yongxin Huang et al.

ADVANCED SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Capacity and Rate Capability of Nitrogen/Oxygen Dual-Doped Hard Carbon in Capacitive Potassium-Ion Storage

Jinlin Yang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Review Nanoscience & Nanotechnology

Borocarbonitrides, BxCyNz: Synthesis, Characterization, and Properties with Potential Applications

C. N. R. Rao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electric Field Effect in Two-Dimensional Transition Metal Dichalcogenides

Fucai Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Potassium Prussian Blue Nanoparticles: A Low-Cost Cathode Material for Potassium-Ion Batteries

Chenglin Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hierarchical VS2 Nanosheet Assemblies: A Universal Host Material for the Reversible Storage of Alkali Metal Ions

Junhua Zhou et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Weak Van der Waals Stacking, Wide-Range Band Gap, and Raman Study on Ultrathin Layers of Metal Phosphorus Trichalcogenides

Ke-zhao Du et al.

ACS NANO (2016)

添加到收藏夹

Article Chemistry, Physical

MoS2 Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium-Ion Batteries

Xiuqiang Xie et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Role of Nitrogen-Doped Graphene for Improved High-Capacity Potassium Ion Battery Anodes

Keith Share et al.

ACS NANO (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wafer-Scale and Wrinkle-Free Epitaxial Growth of Single-Orientated Multilayer Hexagonal Boron Nitride on Sapphire

A-Rang Jang et al.

NANO LETTERS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Chemically Integrated Inorganic-Graphene Two-Dimensional Hybrid Materials for Flexible Energy Storage Devices

Lele Peng et al.

SMALL (2016)

添加到收藏夹

Article Electrochemistry

Synthesizing Nanoparticles of Co-P-Se compounds as Electrocatalysts for the Hydrogen Evolution Reaction

Mingshu Xiao et al.

ELECTROCHIMICA ACTA (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Graphene and Graphene-like Two-Dimensional Materials in Photodetection: Mechanisms and Methodology

Zhenhua Sun et al.

ACS NANO (2014)

添加到收藏夹

Article Chemistry, Physical

Theoretical Study of Li Migration in Lithium-Graphite Intercalation Compounds with Dispersion-Corrected DFT Methods

Sascha Thinius et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

添加到收藏夹

Article Chemistry, Physical

Designed Synthesis of Solid and Hollow Cu2-xTe Nanocrystals with Tunable Near-Infrared Localized Surface Plasmon Resonance

Hong-Jie Yang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

添加到收藏夹

Article Chemistry, Physical

Cycling performance of low-cost lithium ion batteries with natural graphite and LiFePO4

J Shim et al.

JOURNAL OF POWER SOURCES (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.