相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Anomalous inapplicability of nacre-like architectures as impact-resistant templates in a wide range of impact velocities
Xiao Zhang et al.
NATURE COMMUNICATIONS (2022)
Merits and limits of a variational definition of the effective toughness of heterogeneous materials
Jean-Claude Michel et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)
Mechanical response and deformation mechanisms of porous PZT95/5 ceramics under shock-wave compression
Zhaoxiu Jiang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Fracture Diodes: Directional Asymmetry of Fracture Toughness
N. R. Brodnik et al.
PHYSICAL REVIEW LETTERS (2021)
Strong and Tough Bioinspired Additive-Manufactured Dual-Phase Mechanical Metamaterial Composites
Sha Yin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)
A fast Fourier transform based method for computing the effective crack energy of a heterogeneous material on a combinatorially consistent grid
Felix Ernesti et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2021)
Continuous and discrete methods based on X-ray computed-tomography to model the fragmentation process in brittle solids over a wide range of strain-rates-application to three brittle materials
P. Forquin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)
Effective toughness of disordered brittle solids: A homogenization framework
Mathias Lebihain et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)
Centrifugation and index matching yield a strong and transparent bioinspired nacreous composite
Ali Amini et al.
SCIENCE (2021)
Fragmentations of Alumina(Al2O3) and Silicon Carbide(SiC) under quasi-static compression
Qingyan Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Nacre-like alumina with unique high strain rate capabilities
Koen Evers et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Strength and toughness trade-off optimization of nacre-like ceramic composites
Kaoutar Radi et al.
COMPOSITES PART B-ENGINEERING (2020)
An FFT-based method for computing weighted minimal surfaces in microstructures with applications to the computational homogenization of brittle fracture
Matti Schneider
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2020)
Three-Dimensional Laser Engraving for Fabrication of Tough Glass-Based Bioinspired Materials
Ahmed S. Dalaq et al.
JOM (2020)
A study of rock joint influence on rock fracturing using a static fracture stimulation method
V. R. S. De Silva et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
High fracture toughness micro-architectured materials
Y. Liu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Determination of interface fracture properties by micro- and macro-scale experiments in nacre-like alumina
Aurelien Doitrand et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Intergranular fracture prediction and microstructure design
Shmuel Osovski et al.
INTERNATIONAL JOURNAL OF FRACTURE (2019)
Fracture mechanics of nacre-like materials using discrete-element models: Effects of microstructure, interfaces and randomness
Najmul Abid et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Elasticity and fracture of brick and mortar materials using discrete element simulations
Kaoutar Radi et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Biomimetic architected materials with improved dynamic performance
Zian Jia et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Impact-resistant nacre-like transparent materials
Z. Yin et al.
SCIENCE (2019)
Transparent and tough bulk composites inspired by nacre
Tommaso Magrini et al.
NATURE COMMUNICATIONS (2019)
Numerical simulation of column charge explosive in rock masses with particle flow code
Junxiong Yang et al.
GRANULAR MATTER (2019)
Design of strain tolerant porous microstructures - A case for controlled imperfection
David Jauffres et al.
ACTA MATERIALIA (2018)
A geometric model for the fracture toughness of porous materials
H. Jelitto et al.
ACTA MATERIALIA (2018)
DEM analysis of failure mechanisms in the intact Brazilian test
Yifei Ma et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
A displacement-softening contact model for discrete element modeling of quasi-brittle materials
Yifei Ma et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Discrete-element modeling of nacre-like materials: Effects of random microstructures on strain localization and mechanical performance
Najmul Abid et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Stress fluctuation, crack renucleation and toughening in layered materials
C-J Hsueh et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Mineral Nano-Interconnectivity Stiffens and Toughens Nacre-like Composite Materials
Madeleine Grossman et al.
ADVANCED MATERIALS (2017)
Engineering the crack path by controlling the microstructure
A. Srivastava et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
Toughening of thin ceramic plates using bioinspired surface patterns
Idris A. Malik et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Homogenization and Path Independence of the J-Integral in Heterogeneous Materials
Chun-Jen Hsueh et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2016)
Dynamic response of glass under low-velocity impact and high strain-rate SHPB compression loading
Seyed Soheil Daryadel et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)
Experiments on fracture trajectories in ceramic samples with voids
D. Misseroni
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Grain boundary crack growth in metastable titanium β alloys
S. Osovski et al.
ACTA MATERIALIA (2015)
Experimental and analytical insights on fracture trajectories in brittle materials with voids
D. Misseroni et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
GPU-based simulations of fracture in idealized brick and mortar composites
J. William Pro et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
Optimization design of strong and tough nacreous nanocomposites through tuning characteristic lengths
Yong Ni et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
A laser-engraved glass duplicating the structure, mechanics and performance of natural nacre
Seyed Mohammad Mirkhalaf Valashani et al.
BIOINSPIRATION & BIOMIMETICS (2015)
From microstructural features to effective toughness in disordered brittle solids
V. Demery et al.
EPL (2014)
Effect of inclusion density on ductile fracture toughness and roughness
A. Srivastava et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Effective toughness of heterogeneous media
M. Z. Hossain et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Strong, tough and stiff bioinspired ceramics from brittle constituents
Florian Bouville et al.
NATURE MATERIALS (2014)
Overcoming the brittleness of glass through bio-inspiration and micro-architecture
M. Mirkhalaf et al.
NATURE COMMUNICATIONS (2014)
Adhesion of heterogeneous thin films-I: Elastic heterogeneity
S. M. Xia et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Prediction of fracture toughness of ceramic composites as function of microstructure: I. Numerical simulations
Yan Li et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Quantitative Prediction of Effective Toughness at Random Heterogeneous Interfaces
Sylvain Patinet et al.
PHYSICAL REVIEW LETTERS (2013)
Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material
L. Hedjazi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Discontinuous crack-bridging model for fracture toughness analysis of nacre
Yue Shao et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
Micromechanical models to guide the development of synthetic 'brick and mortar' composites
Matthew R. Begley et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
How cracks propagate in a vitreous dense biopolymer material
L. Hedjazi et al.
ENGINEERING FRACTURE MECHANICS (2011)
An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression
Heekwang Lee et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Toughness amplification in natural composites
Francois Barthelat et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
Failure mode transition in nacre and bone-like materials
Reza Rabiei et al.
ACTA BIOMATERIALIA (2010)
Abaqus implementation of extended finite element method using a level set representation for three-dimensional fatigue crack growth and life predictions
Jianxu Shi et al.
ENGINEERING FRACTURE MECHANICS (2010)
Mechanical properties of unidirectional nanocomposites with non-uniformly or randomly staggered platelet distribution
Z. Q. Zhang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
On the Fracture Toughness of Advanced Materials
Maximilien E. Launey et al.
ADVANCED MATERIALS (2009)
Numerical simulation of a direct shear test on a rock joint using a bonded-particle model
Jung-Wook Park et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
Merger of structure and material in nacre and bone - Perspectives on de novo biomimetic materials
Horacio D. Espinosa et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Fracture of porous materials - Influence of the pore size
D. Leguillon et al.
ENGINEERING FRACTURE MECHANICS (2008)
Biological materials: Structure and mechanical properties
Marc André Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2007)
Prediction of crack initiation at blunt notches and cavities -- size effects
D. Leguillon et al.
ENGINEERING FRACTURE MECHANICS (2007)
Application of fracture mechanics concepts to hierarchical biomechanics of bone and bone-like materials
Huajian Gao
INTERNATIONAL JOURNAL OF FRACTURE (2006)
Scaling theory for quasibrittle structural failure
ZP Bazant
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2004)
Mechanical properties of nanostructure of biological materials
BH Ji et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
Effects of porosity on the measured fracture energy of brittle materials
LJ Vandeperre et al.
PHILOSOPHICAL MAGAZINE (2004)
A bonded-particle model for rock
DO Potyondy et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)
Multi-scale constitutive model and computational framework for the design of ultra-high strength, high toughness steels
S Hao et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
Microstructure and mechanical properties of silicon nitride ceramics with controlled porosity
JF Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)