☆ 4.7 Article

Dynamic characteristics of spur gear system with tooth root crack considering gearbox flexibility

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Vibration characteristics of rotor-bearing system with angular misalignment and cage fracture: Simulation and experiment

Pengfei Wang et al.

Summary: This paper studies the vibration characteristics of cage fracture faults in rolling bearings from both simulation and experimental aspects. It finds that when cage fracture occurs, the system amplitude increases and obvious impact vibration characteristics appear, and the vibration energy gradually concentrates to low-frequency vibration. These results provide important reference for the identification and diagnosis of rolling bearing misalignment and cage fracture.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An improved fault model of wind turbine gear drive under multi-stage cracks

Zizhen Qiao et al.

Summary: A novel simulation dynamic model is established for the two-stage cracked gear drive of wind turbines based on fracture mechanics theory. The results of simulation and experiment verify the proposed model and reveal the significant influence of cracks on the mesh stiffness and dynamic characteristics of the gears.

SIMULATION MODELLING PRACTICE AND THEORY (2023)

添加到收藏夹

Article Engineering, Mechanical

Time-frequency ridge estimation: An effective tool for gear and bearing fault diagnosis at time-varying speeds

Yifan Li et al.

Summary: This paper proposes a novel time-frequency ridge estimation (TFRE) method, which integrates a new cost kernel function and an adaptive search region detection principle to improve the performance of ridge estimation. Experimental results demonstrate that the proposed TFRE outperforms state-of-the-art methods in ridge estimation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of static and dynamic misalignment of rolling bearing on nonlinear vibration characteristics of rotor system

Peng-fei Wang et al.

Summary: In this study, a five-degree of freedom nonlinear force model considering bearing misalignment is proposed, and the effects of misalignment on the dynamic contact characteristics of bearing and the vibration characteristics of the rotor system are analyzed. Evaluation indexes for bearing misalignment are given based on the dynamic response. The research provides valuable insights for fault identification of the rotor-bearing system.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2023)

添加到收藏夹

Article Acoustics

Dynamic modeling of GTF star gear-rotor coupling system considering structural flexibility

Hongxu Tian et al.

Summary: This paper establishes a dynamic model of Geared turbofan (GTF) star gear-rotor coupling system, considering the flexibility of various components. The study finds that structural flexibility significantly affects the modal characteristics of the system. The counter-rotating between the low-pressure rotor and the fan rotor results in frequency veering, and low frequency excitation at star gear train can cause resonant vibration of the rotor.

JOURNAL OF SOUND AND VIBRATION (2023)

添加到收藏夹

Article Engineering, Mechanical

Investigation on planetary gearbox fault mechanism under variable speed conditions based on rigid-flexible coupling dynamics model

Kongliang Zhang et al.

Summary: A rigid-flexible coupling dynamics model of wind turbine planetary gearbox is established in this study, considering different transfer paths and variable conditions. The model is validated through simulations and experiments, and it can analyze the gearbox's output shaft speed, vibration response, and fault characteristics under variable speed conditions. This modeling method provides a new idea for multi-path modeling of wind turbine gearboxes and the study of fault mechanism.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

Prediction of tribological and dynamical behaviors of spur gear pair considering tooth root crack

Jiang Zhao et al.

Summary: The presence of root cracks in gears significantly impacts their dynamic performance by altering meshing stiffness and tribological characteristics, leading to changes in load distribution ratios and vibration.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of three types of bearing misalignments on dynamic characteristics of planetary gear set-rotor system

Pengfei Wang et al.

Summary: This paper analyzes the effects of axial, radial, and tilt misalignments on the dynamic characteristics of the planetary gear set-rotor system. It proposes a nonlinear restoring force model for ball bearings under different misalignment conditions. The dynamic model of the planetary gear set is established using the lumped parameter method, and the rotor is modeled using the Timoshenko beam element. The results show that misalignments reduce vibration amplitude but increase load-bearing area and contact load. Different types of misalignments also affect the varying compliance frequency amplitude of the bearing. The research provides a theoretical basis for fault diagnosis and identification of bearing misalignment in complex rotating machinery systems.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

An improved mesh stiffness calculation model for cracked helical gear pair with spatial crack propagation path

Siyu Wang et al.

Summary: This study focuses on the gear crack in helical gear pair, and introduces improved models for spatial crack propagation paths and limiting line to characterize the crack effect. The influence of crack parameters and types on the time varying mesh stiffness of helical gear pair is also investigated.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Dynamic modeling of the gear-rotor systems with spatial propagation crack and complicated foundation structure

Kangkang Chen et al.

Summary: Considering both spatial crack fault and complex foundation structure, this study establishes a dynamic finite element model and multi-body dynamic model to analyze the dynamic characteristics of gear-rotor systems. The research uses the extended finite element method to simulate the three-dimensional crack propagation paths of spur gears under partial load, calculates the mesh stiffness of spur gears with the spatial crack and complex foundation using the proposed three-dimensional loaded tooth contact analysis (3D-LTCA) method, and verifies the results with the finite element method. The dynamic responses of the gear-rotor system under different crack levels are analyzed, and the advantages and disadvantages of these two dynamic models are evaluated. The study finds that the 3D-LTCA can accurately consider the influence of complex foundation and spatial crack on mesh stiffness, and the finite element model and multi-body dynamic model can effectively analyze the influence of crack fault and foundation structure on dynamic responses.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Marine

Investigation on crack failure of helical gear system of the gearbox in wind turbine: Mesh stiffness calculation and vibration characteristics recognition

Siyu Wang et al.

Summary: In this study, an improved model is proposed to calculate the mesh stiffness of a helical gear system with cracks, and a dynamic model is established to analyze the vibration response. The results show that cracks can cause a reduction in mesh stiffness and that more severe cracks result in a higher amplitude and more abundant side frequency components in the vibration response.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

A novel mathematical model for analysis of the cracked planet gear

Tiancheng Ouyang et al.

Summary: This paper proposes an improved model to address the crack fault in complicated gear systems, and a 2D finite element model is established to verify the proposed method. The influences of crack size and inclination angle on meshing stiffness are investigated, and the dynamic responses of the crack gear system in both time and frequency domains are obtained. Additionally, statistical indicators are employed to characterize the evolution of crack propagation.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

Dynamic modeling and analysis of the internal gear transmission with tooth crack subjected to the heavy torque

Nan Gao et al.

Summary: This study investigates the free and nonlinear vibrations of the internal gear transmission and establishes a rigid-elastic coupled model. The research reveals that considering the elasticity of the ring gear leads to richer nonlinear behaviors, and the larger the crack depth, the more prominent the sidebands in the frequency domain.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

Vibration characteristics of bearing-rotor systems with inner ring dynamic misalignment

Hongyang Xu et al.

Summary: This study proposes a novel dynamic model of the bearing-rotor system, considering the inner ring dynamic misalignment and incorporating nonlinearity and axial restraint. The accuracy of the model is verified through experimentation, and the effects of misalignment angle, radial clearance, and rotational speed on system dynamic characteristics are analyzed.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Vibration feature of spur gear transmission with non-uniform depth distribution of tooth root crack along tooth width

Jieyu Ning et al.

Summary: Gear tooth root crack is a typical fault in gear transmissions that poses a threat to operational safety. Detecting and understanding the severity of these cracks is crucial for preventing accidents. This study introduces an improved gear dynamics model to accurately model non-uniform distribution of tooth root cracks and their impact on vibration characteristics, providing important insights for quantitative detection and diagnosis of such faults.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

Lantao Yang et al.

Summary: This paper proposes an improved mesh stiffness calculation model for cracked gears, considering the crack opening state by re-evaluating the effective compression section and the neutral layer. The study shows that the proposed model achieves higher accuracy compared to the traditional model, with increasing precision as the crack grows.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

A new calculation method for tooth fillet foundation stiffness of cracked spur gears

Lantao Yang et al.

Summary: A new calculation method is proposed in the study to accurately consider the impact of tooth and rim cracks on tooth fillet foundation stiffness, which is validated by finite element method results. The proposed method can be employed for more accurate calculation of mesh stiffness of cracked gears and further serve the fault diagnosis process of spur gear systems.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

Spur gear crack modelling and analysis under variable speed conditions using variational mode decomposition

Akash Patel et al.

Summary: This article discusses the impact of cracks on gears, proposes a model for simulating crack propagation path, explores a method for handling non-stationary signals, and introduces a new state feature for severity level classification. The effectiveness of the simulation model is validated through experiments.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Mechanical

Transmission error investigation of gearbox using rigid-flexible coupling dynamic model: Theoretical analysis and experiments

Tiantang Duan et al.

Summary: In this study, a system-level investigation of gearbox transmission error (TE) was conducted by proposing a rigid-flexible coupling dynamic model. The results showed that TE increases with load, but decreases when considering housing flexibility. Properly decreasing the stiffness of the housing and increasing the inner radius of the hollow shaft can reduce system TE.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of Tooth Surface Crack Propagation on Meshing Stiffness and Vibration Characteristic of Spur Gear System

Lan-tao Yang et al.

Summary: Understanding the excitation mechanism and dynamic characteristics of surface cracks is important for early diagnosis of spalling faults. The proposed analytical calculation model and dynamic model provide methods and tools for studying the impact of surface cracking.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Engineering, Mechanical

Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life

Oguz Dogan et al.

Summary: Gears play a crucial role in power transmission systems, but are susceptible to high loads and impact forces, leading to surface cracks. By studying different rim thicknesses and pressure angles, the effects on fatigue crack propagation life and root stress were explored, resulting in a significant decrease in maximum stress values and a substantial increase in fatigue propagation life.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

An improved model for meshing characteristics analysis of spur gears considering fractal surface contact and friction

Zhifang Zhao et al.

Summary: The establishment of a fractal contact model for gear pair contact allows for the calculation of contact stiffness and compliance. Numerical simulation results show that contact stiffness increases with fractal dimension, while factors such as changes in fractal parameter and friction coefficient affect mesh characteristics.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Mechanics

Three-dimensional modeling of non-planar fatigue crack growth in spur gear tooth using tetrahedral finite elements

Oguzhan Demir

Summary: This paper presents a numerical methodology for predicting crack growth path and life of structures containing cracks, applied to three different case studies on spur gear tooth. Three-dimensional non-planar fatigue crack propagation analyses are conducted using FRAC3D, showing close agreement with available data from the literature in terms of crack growth trajectories. The methodology and criteria introduced can be utilized for three-dimensional crack growth analysis with less user intervention, time, and effort.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Analysis of lubrication performance for internal meshing gear pair considering vibration

Guang-xiao Jian et al.

Summary: The thermal elasto-hydrodynamic lubrication characteristics of internal meshing gears in a planetary gear train under vibrations were studied, showing that increasing modification coefficient can continuously enhance lubrication performance but also intensify gear engagement and tooth-change impact.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

添加到收藏夹

Article Acoustics

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

Xu Li et al.

Summary: Tooth fractures and cracks in gear transmission systems were studied using fracture mechanics theory, with crack propagation paths obtained for spur gears. A flexible body model for the cracked gear system was established in ADAMS, with vibration signals under different torques validated by experimental results. Statistical indicators and instantaneous energy were used to quantify damage and analyze fault features in the gear system.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2021)

添加到收藏夹

Article Engineering, Mechanical

Meshing and dynamic characteristics analysis of spalled gear systems: A theoretical and experimental study

Yifan Huangfu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Proceedings Paper Environmental Sciences

Dynanic Simulation of Helical Gears with Crack Propagating In to Gear Body

Hanjun Jiang et al.

2019 5TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION (2020)

添加到收藏夹

Article Engineering, Mechanical

Multi crack detection in helical gear teeth using transmission error ratio

Mohsen Rezaei et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Crack detection for spur gears with asymmetric teeth based on the dynamic transmission error

Oguz Dogan et al.

MECHANISM AND MACHINE THEORY (2019)

添加到收藏夹

Article Engineering, Mechanical

Vibration analysis for tooth crack detection in a spur gear system with clearance nonlinearity

Yi Yang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Mechanical

Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths

Kangkang Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Geometrical complexity and crack trajectory based fatigue life prediction for a spur gear having tooth root crack

Vivek Patil et al.

ENGINEERING FAILURE ANALYSIS (2019)

添加到收藏夹

Article Engineering, Mechanical

A study of nonlinear excitation modeling of helical gears with Modification: Theoretical analysis and experiments

Jing Wei et al.

MECHANISM AND MACHINE THEORY (2018)

添加到收藏夹

Article Engineering, Mechanical

Crack growth modeling in spur gear tooth and its effect on mesh stiffness using extended finite element method

Jay Govind Verma et al.

ENGINEERING FAILURE ANALYSIS (2018)

添加到收藏夹

Article Engineering, Mechanical

Improved analytical methods for calculation of gear tooth fillet-foundation stiffness with tooth root crack

Zaigang Chen et al.

ENGINEERING FAILURE ANALYSIS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Vibration transmission and energy dissipation through the gear-shaft bearing-housing system subjected to impulse force on gear

Huifang Xiao et al.

MEASUREMENT (2017)

添加到收藏夹

Article Engineering, Mechanical

Analytical model for mesh stiffness calculation of spur gear pair with non-uniformly distributed tooth root crack

Zaigang Chen et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental measurement of gear mesh stiffness of cracked spur gear by strain gauge technique

Naresh K. Raghuwanshi et al.

MEASUREMENT (2016)

添加到收藏夹

Article Engineering, Mechanical

Fault features analysis of cracked gear considering the effects of the extended tooth contact

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2015)

添加到收藏夹

Article Mechanics

Three dimensional fatigue crack initiation and propagation analysis of a gear tooth under various load conditions and fatigue life extension with boron/epoxy patches

Mir Ali Ghaffari et al.

ENGINEERING FRACTURE MECHANICS (2015)

添加到收藏夹

Article Engineering, Mechanical

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Zhiguo Wan et al.

ENGINEERING FAILURE ANALYSIS (2014)

添加到收藏夹

Article Engineering, Mechanical

Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set

Xihui Liang et al.

MECHANISM AND MACHINE THEORY (2014)

添加到收藏夹

Article Engineering, Mechanical

Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffness

Yogesh Pandya et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Engineering, Mechanical

Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack

Yogesh Pandya et al.

ENGINEERING FAILURE ANALYSIS (2013)

添加到收藏夹

Article Engineering, Mechanical

Research on the dynamic mechanism of the gear system with local crack and spalling failure

Rui Ma et al.

ENGINEERING FAILURE ANALYSIS (2012)

添加到收藏夹

Article Acoustics

Time-Varying Meshing Stiffness Calculation and Vibration Analysis for a 16DOF Dynamic Model With Linear Crack Growth in a Pinion

Xiaojun Zhou et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Mechanics

Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness

Fakher Chaari et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)

添加到收藏夹

Article Engineering, Mechanical

Detecting cracks in the tooth root of gears

Ales Belsak et al.

ENGINEERING FAILURE ANALYSIS (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Finite element analysis and modeling of structure with bolted joints

Jeong Kim et al.

APPLIED MATHEMATICAL MODELLING (2007)

添加到收藏夹

Article Engineering, Manufacturing

Vibration Analysis of the Helical Gear System Using the Integrated Excitation Model

Takayuki Nishino

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.