☆ 4.7 Article

Photoinitiators with low migration capability based on benzophenone

EUROPEAN POLYMER JOURNAL (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Xanthate-supported photo-iniferter (XPI)-RAFT polymerization: facile and rapid access to complex macromolecules

Anne-Catherine Lehnen et al.

Summary: XPI-RAFT is introduced as a fast and versatile photo-polymerization strategy. It enables efficient chain extension directly by irradiation and decouples photo-activation from polymerization control, making it an elegant tool for the synthesis of defined and complex macromolecules.

CHEMICAL SCIENCE (2023)

添加到收藏夹

Article Polymer Science

Strategies to develop ?-aminoketone derivatives photoinitiators with low migration ability for UV-vis LED photopolymerization

Wen Liao et al.

Summary: In this study, a polymerizable vinyl sulfide modified 907 derivative and four macromolecular photoinitiators based on it were designed and synthesized to achieve low migration and high photoactivity. The structures of these photoinitiators were confirmed by various analyses. The macromolecular strategies successfully improved the photoactivity of the photoinitiators compared to the base derivative. Moreover, the prepared photoinitiators demonstrated better performance in terms of radical generation and migration stability, making them suitable for applications in food packaging and biological materials.

EUROPEAN POLYMER JOURNAL (2023)

添加到收藏夹

Article Polymer Science

Ketocoumarin-Based Photoinitiators for High-Sensitivity Two-Photon Lithography

Jin Tang et al.

ACS Applied Polymer Materials (2023)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

High-performance photoinitiating systems for new generation dental fillings

Monika Topa-Skwarczynska et al.

Summary: This article aims to develop new generation dental composites that have improved performance compared to current dental fillings on the market, and to investigate the impact of new initiating systems on parameters such as degree of cure, hardness, color, and shrinkage. The effectiveness of the developed initiating systems was verified through spectroscopic, electrochemical, and kinetic studies using the real-time FT-IR method. The experiments demonstrated that the composite containing 3-SCH3Ph-Q, IOD, MDEA, nanometric silica, and a bonding agent achieved a cure rate of over 90% after just 1 cycle of dental lamp exposure (30 s), a hardness of 82 & PLUSMN; 4 on the Shore Scale after curing, and a polymerization shrinkage of less than 2.8%.

DENTAL MATERIALS (2023)

添加到收藏夹

Review Engineering, Environmental

Occurrence, Fate, Human Exposure, and Toxicity of Commercial Photoinitiators

Xiaomeng Ji et al.

Summary: Photoinitiators (PIs) are anthropogenic chemicals used in polymerization systems to initiate polymerization reactions. Their wide application in commercial products has led to environmental issues. This study reviews the occurrence, human exposure, and toxicity of PIs and suggests future research directions. PIs have been found in commercial products, water, sediment, sewage sludge, indoor dust, serum, and breast milk. Benzophenone is the most detected congener. PIs have toxic effects, such as carcinogenicity and endocrine disruption. Future research should focus on coexposure effects, metabolism/transformation pathways, and the development of greener PIs.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Article Chemistry, Applied

Bis(N-naphthyl-N-phenylamino)benzophenones as exciton-modulating materials for white TADF OLEDs with separated charge and exciton recombination zones

Malek Mahmoudi et al.

Summary: Organic semiconductors were used for efficient and stable white OLEDs by synthesizing new compounds with desired properties, and spatial exciton allocation strategy was employed to enhance the external quantum efficiency of white TADF OLEDs.

DYES AND PIGMENTS (2022)

添加到收藏夹

Article Polymer Science

A new carbazolyl-basedacylphosphine oxide photoinitiator with high performance and low migration

YinPing Wu et al.

Summary: The newly synthesized photoinitiator ALPO showed superior double bond conversion and solubility, as well as lower migration rate, compared to the widely used commercial TPO. This suggests that ALPO may be able to replace TPO in the light curing field.

JOURNAL OF POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Applied

A UV-LED excited photoinitiator with low toxicity and low migration for photocurable inks

Xiaozhen Ren et al.

Summary: With the increasing awareness of environmental protection, the market share of LED in the photo curing field is expanding rapidly. Researchers have developed a molecule (ND-1) that possesses both co-initiating and polymerizable groups, showing good initiation effect on acrylate monomers under UV-LED irradiation. ND-1 exhibits low migration and low toxicity, making it suitable for applications in packaging with photocurable inks in various industries.

DYES AND PIGMENTS (2022)

添加到收藏夹

Article Engineering, Biomedical

The selection of photoinitiators for photopolymerization of biodegradable polymers and its application in digital light processing additive manufacturing

Chia-Chun Wang et al.

Summary: By investigating the application of different photoinitiators in photopolymer resins, it was found that vitamin B2 combined with triethanolamine (B2/TEOA) has a wider light absorbance range and good support for cell proliferation, making it a promising photoinitiator for 3D printing.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2022)

添加到收藏夹

Article Polymer Science

A Water Soluble, Low Migration, and Visible Light Photoinitiator by Thioxanthone-Functionalization of Poly(ethylene glycol)-Containing Poly(β-amino ester)

Turkan Gencoglu et al.

Summary: In this study, a novel photoinitiator (PI) p(PEGDA575-TX) with low ecological impact was introduced. It is a water soluble poly(ethylene glycol)-based poly(beta-amino ester) and can be used for free radical polymerization of di- and tri(meth)acrylates. It exhibits higher initiating reactivity, reduced oxygen inhibition, and migration stability compared to the traditional photoinitiator TX.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Xanthate-Type Photofunctional Chain Transfer Agent for the Synthesis of Macrophotoinitiators

Zafer Uyar et al.

Summary: Polystyrene (PSt), poly(methyl methacrylate) (PMMA), and poly(vinyl acetate) (PVAc) macrophotoinitiators with well-defined structures comprising a benzoin group were synthesized using RAFT/MADIX polymerization. These macrophotoinitiators can be used to synthesize block copolymers with specific functionalities.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Air stable eco-friendly quantum dots with a light-mediated photoinitiator for an inkjet printed flexible light emitting diode

Hanleem Lee et al.

Summary: Printed quantum dot light emitting diodes (QLEDs) have great potential for large-area displays. However, there are still limitations on printed QLEDs with eco-friendly quantum dots, such as selection of ink solvent, environmental degradation, and viscosity. In this study, an air-processable ink with a photoinitiator was designed for improved luminescence and external quantum efficiency. The results showed significant enhancement in both performance and stability.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

添加到收藏夹

Article Chemistry, Applied

Acetylene bridged D-(π-A)2 type dyes containing benzophenone moieties: Photophysical properties, and the potential application as photoinitiators

Xiaoqin Jia et al.

Summary: DBPs dyes based on benzophenone were synthesized using different electron donating groups, resulting in varying photophysical and photochemistry properties. Carbazole favored abnormal fluorescence changes and good initiation ability, while phenothiazine and triphenylamine facilitated good photostability and positive solvatochromism effect.

DYES AND PIGMENTS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Photoinitiators use in printed baby bibs and their migration into Tenax® by gas chromatography-mass spectrometry

Edoardo Galbiati et al.

Summary: A gas chromatography-mass spectrometry method was developed to determine photoinitiators (PIs) in plastics used for food contact, revealing unauthorized PIs and migration issues in plastic baby bibs. Benzophenone was the most commonly detected PI, and migration of certain PIs into food simulants exceeded applicable limits. This study highlights the need for surveillance and risk evaluation in the use of plastics for food contact.

PACKAGING TECHNOLOGY AND SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Current research progress of photopolymerized hydrogels in tissue engineering

Ao Sun et al.

Summary: Photopolymerized hydrogels, with their special formation, can effectively control the formation of hydrogels and are widely used in tissue engineering due to their mild conditions and biocompatibility. They can be applied in cell encapsulation, scaffold materials, and other tissue engineering fields with advanced manufacturing methods.

CHINESE CHEMICAL LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phenacyl Phenothiazinium Salt as a New Broad-Wavelength-Absorbing Photoinitiator for Cationic and Free Radical Polymerizations

Yi Zhu et al.

Summary: The novel photoinitiator P-PTh possesses broad wavelength absorption capabilities in the UV, visible, and near-IR regions, allowing it to efficiently initiate polymerization reactions at different wavelengths. This flexibility may lead to novel pathways in curing applications for pigment systems.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Polymer Science

Irgacure 2959-functionalized poly(ethyleneimine)s as improved photoinitiators: enhanced water solubility, migration stability and visible-light operation

Tugce Nur Eren et al.

Summary: Two novel water soluble polymeric photoinitiators (PPIs) have been synthesized for free radical polymerization, showing excellent water solubility and high photopolymerization efficiency for visible light polymerization. PEI-I2959-Ts exhibits higher migration stability and non-cytotoxicity in cell tests, suggesting potential application in biomaterials.

POLYMER CHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Substituted Thioxanthone-Based Photoinitiators for Efficient Two-Photon Direct Laser Writing Polymerization with Two-Color Resolution

Teng Chi et al.

Summary: ITX is a common photoinitiator in DLW polymerization processes due to its high-efficiency photoinitiating abilities. However, improved photoinitiating materials are required for advanced high-throughput nanomanufacturing techniques. Thioxanthone-based photoinitiators with tailored optical and charge transfer properties were designed and synthesized to demonstrate enhanced two-photon polymerization DLW for superresolution properties.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Food Science & Technology

Interpretation of the migration of benzophenone type photoinitiators into different food simulants and foodstuffs in terms of the physicochemical properties of the migrants

M. P. Elizalde et al.

FOOD PACKAGING AND SHELF LIFE (2020)

添加到收藏夹

Article Chemistry, Physical

Polymerizable Oxime Esters: An Efficient Photoinitiator with Low Migration Ability for 3D Printing to Fabricate Luminescent Devices

Wanwan Qiu et al.

CHEMPHOTOCHEM (2020)

添加到收藏夹

Article Polymer Science

A monocomponent bifunctional benzophenone-carbazole type II photoinitiator for LED photoinitiating systems

Shaohui Liu et al.

POLYMER CHEMISTRY (2020)

添加到收藏夹

Article Polymer Science

Keto-coumarin scaffold for photoinitiators for 3D printing and photocomposites

Mira Abdallah et al.

JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Naphthalimide Aryl Sulfide Derivative Norrish Type I Photoinitiators with Excellent Stability to Sunlight under Near-UV LED

Jia Yu et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Polymer Science

The Synthesis of New Type II Polymeric Photoinitiator (thioxantone) via Atom Transfer Radical Polymerization and Their Curing and Migration Studies

Emine Arman Kandirmaz et al.

MACROMOLECULAR RESEARCH (2019)

添加到收藏夹

Article Chemistry, Applied

Synthesis and preliminary photopolymerization envaluation of photopolymerizalbe type II photoinitiators BRA and TXRA

Wenbin Chen et al.

PROGRESS IN ORGANIC COATINGS (2019)

添加到收藏夹

Review Polymer Science

Progress in the development of polymeric and multifunctional photoinitiators

Junyi Zhou et al.

PROGRESS IN POLYMER SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Materials for 3D Printing by Photopolymerization

Michael Layani et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Applied

Preparation of novel thioxanthone based polymeric photoinitiator for flexographic varnish and determination of their migration behaviour

Emine Arman Kandirmaz et al.

PROGRESS IN ORGANIC COATINGS (2018)

添加到收藏夹

Article Physics, Atomic, Molecular & Chemical

Photo-Induced Intermolecular Electron Transfer-Effect of Acceptor Molecular Structures

Wei Zhang et al.

CHINESE JOURNAL OF CHEMICAL PHYSICS (2018)

添加到收藏夹

Article Polymer Science

High-Performance and Low Migration One-Component Thioxanthone Visible Light Photoinitiators

Qingqing Wu et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2017)

添加到收藏夹

Article Polymer Science

One-component thioxanthone-based polymeric photoinitiators

Tugce Nur Eren et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2016)

添加到收藏夹

Review Polymer Science

Visible light initiating systems for photopolymerization: status, development and challenges

Jianzhong Shao et al.

POLYMER CHEMISTRY (2014)

添加到收藏夹

Article Polymer Science

New Push-Pull Dyes Derived from Michler's Ketone For Polymerization Reactions Upon Visible Lights

Mohamad-Ali Tehfe et al.

MACROMOLECULES (2013)

添加到收藏夹

Article Polymer Science

Photoinitiation Mechanism of Free Radical Photopolymerization in the Presence of Cyclic Acetals and Related Compounds

P. Xiao et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.