☆ 4.7 Article

Cobalt/nickel purification by solvent extraction with ionic liquids in millifluidic reactors: From single-channel to numbered-up configuration with solvent recycle

CHEMICAL ENGINEERING JOURNAL (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Intensified Nd extraction in small channels for NdFeB magnet recycling

Charlotte Pheasey et al.

Summary: Neodymium (Nd) was continuously extracted from aqueous solutions using trioctylphosphine oxide (TOPO) dissolved in the ionic liquid 1-Butyl-3-methylimidazolium Bis (trifluoromethanesulfonyl)imide ([C4mim][Tf2N]) in small channel contactors. The study confirmed a 1:6 Nd:TOPO extraction mechanism at high initial Nd concentrations in a nitric acid aqueous phase. The effects of mixture velocity and residence time on the extraction efficiency and mass transfer coefficient were investigated.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Ionic Liquids and Deep-Eutectic Solvents in Extractive Metallurgy: Mismatch Between Academic Research and Industrial Applicability

Koen Binnemans et al.

Summary: Over the past 10-20 years, many academic papers have described the benefits of ionic liquids (ILs) and deep-eutectic solvents (DESs) in extractive metallurgy processes. However, despite being hailed as game-changers, these neoteric solvents have not made significant commercial breakthroughs. This paper reflects on the reasons for their lack of impact, including issues with viscosity, chemical stability, recycling, and cost, and suggests that a deeper understanding of hydrometallurgical processes at the molecular level is more likely to lead to innovation.

JOURNAL OF SUSTAINABLE METALLURGY (2023)

添加到收藏夹

Article Engineering, Chemical

Can 3D printing solve the numbering-up challenge of microfluidic reactors?

Joren van Stee et al.

Summary: This study presents a reproducible production method for microreactor manifolds using commercially available and 3D printed parts. It was found that tubes and fittings alone cannot produce reliable and reproducible manifolds. However, a hybrid manifold consisting of a 3D printed distributor and commercial tubes and fittings showed a significant reduction in maldistribution for both single- and two-phase flow. Furthermore, the surface tension of the applied liquid was shown to have a significant effect on maldistribution, possibly due to the presence of air bubbles.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2023)

添加到收藏夹

Article Engineering, Chemical

Numbering-up liquid-liquid systems in microfluidic reactors: A parametric study

Joren van Stee et al.

Summary: This study demonstrates that flowrate, number of channels, hydrodynamic resistances, and phase ratio have a significant impact on the maldistribution in parallel microfluidic reactors. Advanced statistical methods, such as Multivariate Analysis of Variance (MANOVA), can provide additional insights and partially compensate for variability between experiments.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

An effective process for the separation of U(VI), Th(IV) from rare earth elements by using ionic liquid Cyphos IL 104

Jiawei Lu et al.

Summary: In this study, a homemade membrane emulsification circulation (MEC) extractor was used to separate U(VI) and Th(IV) from rare earth elements. The results showed that Cyphos IL 104 could reach extraction equilibrium within 30 minutes and had strong phase separation ability. The extraction efficiencies of U(VI), Th(IV), La(III), Eu(III) and Yb (III) increased with increasing pH. Effective separation of U(VI) and Th(IV) could be achieved using HCl and H2 SO4 in the stripping experiments. Cyphos IL 104 reacted with U(VI) and Th(IV) through chelation mechanism. The proposed flowchart provided an efficient separation method for U(VI) and Th(IV) from rare earth elements.

CHINESE CHEMICAL LETTERS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects

Ersha Fan et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Extraction Behavior and Separation of Precious and Base Metals from Chloride, Bromide, and Iodide Media Using Undiluted Halide Ionic Liquids

Willem Vereycken et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Engineering, Environmental

Economic and environmental feasibility of hydrometallurgical process for recycling waste mobile phones

Junli Liu et al.

WASTE MANAGEMENT (2020)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Model for Metal Extraction from Chloride Media with Basic Extractants: A Coordination Chemistry Approach

Rayco Lommelen et al.

INORGANIC CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Numbering-up of capillary microreactors for homogeneous processes and its application in free radical polymerization

Min Qiu et al.

REACTION CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Biochemical Research Methods

A numbering-up metal microreactor for the high-throughput production of a commercial drug by copper catalysis

Gwang-Noh Ahn et al.

LAB ON A CHIP (2019)

添加到收藏夹

Article Engineering, Environmental

Predictive model for the scale-out of small channel two-phase flow contactors

Eduardo Garciadiego Ortega et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Engineering, Chemical

Highly efficient and eco-friendly extraction of neodymium using, undiluted and non-fluorinated ionic liquids. Direct electrochemical metal separation

Ramzi Zarrougui et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Environmental

Co and Ni extraction and separation in segmented micro-flow using a coiled flow inverter

Lihua Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

添加到收藏夹

Article Engineering, Environmental

Milli-channel mixer and phase separator for solvent extraction of rare earth elements

M. Enis Leblebici et al.

CHEMICAL ENGINEERING JOURNAL (2016)

添加到收藏夹

Article Engineering, Chemical

Continuous process for selective metal extraction with an ionic liquid

Dries Parmentier et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)

添加到收藏夹

Article Chemistry, Applied

Design of a Numbering-up System of Monolithic Microreactors and Its Application to Synthesis of a Key Intermediate of Valsartan

Aiichiro Nagaki et al.

ORGANIC PROCESS RESEARCH & DEVELOPMENT (2016)

添加到收藏夹

Article Engineering, Chemical

A robust multistage mesoflow reactor for liquid-liquid extraction for the separation of Co/Ni with cyanex 272

Tobias Vandermeersch et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Separation of Precious Metals by Using Undiluted Ionic Liquids

Jian Yang et al.

SOLVENT EXTRACTION RESEARCH AND DEVELOPMENT-JAPAN (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A continuous ionic liquid extraction process for the separation of cobalt from nickel

Sil Wellens et al.

GREEN CHEMISTRY (2013)

添加到收藏夹

Article Mechanics

Experimental study on the performance of a novel structure for two-phase flow distribution in parallel vertical channels

P. Yuan et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

The past, present and potential for microfluidic reactor technology in chemical synthesis

Katherine S. Elvira et al.

NATURE CHEMISTRY (2013)

添加到收藏夹

Article Engineering, Chemical

Design methodology for barrier-based two phase flow distributor

Ma'moun Al-Rawashdeh et al.

AICHE JOURNAL (2012)

添加到收藏夹

Article Engineering, Environmental

Design criteria for a barrier-based gas-liquid flow distributor for parallel microchannels

M. Al-Rawashdeh et al.

CHEMICAL ENGINEERING JOURNAL (2012)

添加到收藏夹

Article Engineering, Environmental

Numbered-up gas-liquid micro/milli channels reactor with modular flow distributor

M. Al-Rawashdeh et al.

CHEMICAL ENGINEERING JOURNAL (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

An environmentally friendlier approach to hydrometallurgy: highly selective separation of cobalt from nickel by solvent extraction with undiluted phosphonium ionic liquids

Sil Wellens et al.

GREEN CHEMISTRY (2012)

添加到收藏夹

Article Engineering, Chemical

Liquid-liquid slug flow: Hydrodynamics and pressure drop

Jovan Jovanovic et al.

CHEMICAL ENGINEERING SCIENCE (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Processing of metals and metal oxides using ionic liquids

Andrew P. Abbott et al.

GREEN CHEMISTRY (2011)

添加到收藏夹

Article Engineering, Environmental

Numbering-up and mass transfer studies of liquid-liquid two-phase microstructured reactors

M. N. Kashid et al.

CHEMICAL ENGINEERING JOURNAL (2010)

添加到收藏夹

Article Engineering, Chemical

Design and Control Techniques for the Numbering-up of Capillary Microreactors with Uniform Multiphase Flow Distribution

Matthias Mendorf et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

添加到收藏夹

Article Energy & Fuels

Rapid design of channel multi-scale networks with minimum flow maldistribution

Meryem Saber et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2009)

添加到收藏夹

Review Chemistry, Multidisciplinary

Applications of ionic liquids in the chemical industry

Natalia V. Plechkova et al.

CHEMICAL SOCIETY REVIEWS (2008)

添加到收藏夹

Article Biochemical Research Methods

Microfluidic large-scale integration on a chip for mass production of monodisperse droplets and particles

Takasi Nisisako et al.

LAB ON A CHIP (2008)

添加到收藏夹

Article Engineering, Environmental

Hydrodynamics of liquid-liquid slug flow capillary microreactor: Flow regimes, slug size and pressure drop

Madhvanand N. Kashid et al.

CHEMICAL ENGINEERING JOURNAL (2007)

添加到收藏夹

Correction Biochemical Research Methods

Multiphase microfluidics: from flow characteristics to chemical and materials synthesis (vol 6, pg 1487, 2006)

Axel Guenther et al.

LAB ON A CHIP (2007)

添加到收藏夹

Correction Biochemical Research Methods

Multiphase microfluidics: from flow characteristics to chemical and materials synthesis (vol 6, pg 1487, 2006)

Axel Gunther et al.

LAB ON A CHIP (2007)

添加到收藏夹

Review Biochemical Research Methods

Multiphase microfluidics:: from flow characteristics to chemical and materials synthesis

Axel Gunther et al.

LAB ON A CHIP (2006)

添加到收藏夹

Article Engineering, Chemical

Flow distribution and ozonolysis in gas-liquid multichannel microreactors

Yasuhiro Wada et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)

添加到收藏夹

Article Chemistry, Applied

Radical polymerization using microflow system: Numbering-up of microreactors and continuous operation

Takeshi Iwasaki et al.

ORGANIC PROCESS RESEARCH & DEVELOPMENT (2006)

添加到收藏夹

Article Engineering, Chemical

Scaled-out multilayer gas-liquid microreactor with integrated velocimetry sensors

N de Mas et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

添加到收藏夹

Article Engineering, Environmental

Flow distribution in different microreactor scale-out geometries and the effect of manufacturing tolerances and channel blockage

C Amador et al.

CHEMICAL ENGINEERING JOURNAL (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ionic liquids - An overview

SA Forsyth et al.

AUSTRALIAN JOURNAL OF CHEMISTRY (2004)

添加到收藏夹

Article Biochemical Research Methods

The intensification of rapid reactions in multiphase systems using slug flow in capillaries

JR Burns et al.

LAB ON A CHIP (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.