☆ 4.1 Review

Mechanical performance and bioactivation of 3D-printed PEEK for high-performance implant manufacture: a review

PROGRESS IN BIOMATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation

Cho-Pei Jiang et al.

Summary: The study optimized the printing parameters for PEEK to improve the tensile strength and crystallinity of printed objects using the Taguchi method. The study also investigated the effect of annealing on the tensile strength and found that the optimized printing parameters resulted in an average tensile strength of 91.48 MPa, with an increase to 98.85 MPa after annealing, comparable to molded PEEK.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Engineering, Biomedical

Fabrication of a biodegradable and cytocompatible magnesium/nanohydroxyapatite/fluorapatite composite by upward friction stir processing for biomedical applications

Catarina Vidal et al.

Summary: Biodegradable magnesium-based metal matrix composites, with the introduction of hydroxyapatite nanoparticles (HAP) and fluorapatite (FA) microparticles, show improved bioactivity and cytocompatibility, making them promising for orthopaedic applications.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Han Qu et al.

Summary: This study investigates the thermodynamic properties of thin-structure PEEK samples printed under various conditions. The results show that appropriate substrate temperature can significantly improve the mechanical and thermal properties of PEEK material.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Industrial

Effect of temperature history during additive manufacturing on crystalline morphology of PEEK

Austin Lee et al.

Summary: This study investigated the effect of additive manufacturing parameters on the thermal history and crystalline morphology of PEEK using a combined experimental and numerical approach. It was found that the high melting temperature of PEEK resulted in fast melt cooling rates and short annealing times, leading to relatively low degree of crystallinity and small crystalline morphology during printing.

ADVANCES IN INDUSTRIAL AND MANUFACTURING ENGINEERING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Understanding mechanical properties in fused filament fabrication of polyether ether ketone

Jing Pu et al.

Summary: By conducting DMA analysis on the mechanical properties of PEEK single filament walls constructed using FFF under different printing conditions, differences were identified. A non-isothermal quiescent crystallization model was used to understand the findings, and a correlation between predicted crystal fraction and storage modulus was established.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

The effects of three cold plasma treatments on the osteogenic activity and antibacterial property of PEEK

Chenchen Liu et al.

Summary: This study investigates the differences in osteogenic activity and antibacterial properties of PEEK treated by three types of cold plasma. The results showed that cold plasma treatment increased nanoprotrusions on the surface of PEEK, enhanced surface roughness, improved hydrophilicity, and significantly enhanced osteogenic activity and antibacterial properties. Among the treatment methods, N-2 cold plasma treatment was found to be the most suitable for PEEK application in dental implants.

DENTAL MATERIALS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Social life cycle performance of additive manufacturing in the healthcare industry: the orthosis and prosthesis cases

Bruno Soares et al.

Summary: This study investigates the social impact of adopting AM in the medical devices industry, demonstrating positive and negative social impacts through case studies of prostheses and orthoses.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2021)

添加到收藏夹

Article Biotechnology & Applied Microbiology

In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial

Philipp Honigmann et al.

Summary: 3D printing technology is becoming increasingly popular in the medical sector for producing anatomical biomodels, surgical guides, and prosthetics. In addition to personalized medicine, a future direction for medical 3D printing is in-house manufacturing of patient-specific implants (PSIs) for bone replacements. The use of medical-grade materials like polyetheretherketone (PEEK) in 3D printing technology can pave the way for more advanced medical applications.

BIOMED RESEARCH INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printing high interfacial bonding polyether ether ketone components via pyrolysis reactions

Qiushi Li et al.

Summary: Recently, 3D-printed PEEK components have shown extensive applications in advanced electronics, 5G communication, medical implants, and aerospace. However, the weak interfacial bonding strength has been a critical limitation. A novel method proposed in this study improves the interfacial bonding strength by enhancing the plasticizing effect of benzene derivatives, resulting in significantly increased bonding strengths for 3D-printed components. The enhancing mechanism using pyrolysis products derived from POSS was characterized, expanding the design space for developing 3D-printed materials with satisfactory interfacial bonding strength.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polyetheretherketone and titanium surface treatments to modify roughness and wettability - Improvement of bioactivity and antibacterial properties

Davide Porrelli et al.

Summary: This study utilized sandblasting and air plasma treatments to increase surface roughness and wettability of titanium and PEEK materials, and found that these treatments had varying effects on cell adhesion, proliferation, bacterial adhesion, and biofilm formation. The results highlighted the importance of surface properties like roughness and hydrophobicity in determining cell behavior on biomaterials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Biomedical

Graphene oxide-reinforced poly (ether-ether-ketone)/silica composites with improved mechanical performance and surface bioactivity

Chang Chen et al.

Summary: In this study, PEEK/SiO2 and PEEK/SiO2/GO composites were prepared using a combination of ball milling-ultrasonic dispersion and melt extrusion injection molding. The mechanical tests showed significant enhancements in modulus, strength, and fracture toughness with the addition of SiO2 and GO. The use of GO as a filler surface modifier was shown to be a novel interfacial design strategy for the development of high-performance composites.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ameliorative antibacterial, anti-inflammatory, and osteogenic activity of sulfonate-bearing polyetheretherketone toward orthopedic and dental implants

Lvhua Liu et al.

Summary: The introduction of sulfonate groups onto PEEK surface enhances antibacterial, anti-inflammatory, and osteogenic activity, as well as adhesion, spreading, and proliferation of osteoblasts. Sulfonate-bearing PEEK shows potential clinical applications as orthopedic and dental implants.

MATERIALS LETTERS (2021)

添加到收藏夹

Review Polymer Science

Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review

Shivam Verma et al.

Summary: The review study highlights the progress of PEEK and its composite materials in biomedical applications, showing their potential as alternative materials for conventional implants. PEEK exhibits excellent mechanical and physicochemical properties, contributing to successful applications in dentistry, knee implants, hip replacement, spine implants, and other areas. Further research is needed to optimize techniques and enhance accessibility of PEEK and its composites for broader societal benefits.

EUROPEAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Engineering, Biomedical

Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters

Yiqiao Wang et al.

Summary: Design of experiments was used to study the impact of 3D printing parameters on the quality of PEEK parts, with bending and compression tests conducted for quantitative evaluation. Nozzle diameter, nozzle temperature, and printing speed were found to be crucial factors affecting the performance of the printed PEEK samples. Optimal mechanical properties and dimension accuracy were achieved by optimizing the parameter combinations.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Polymer Science

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach

Krzysztof Rodzen et al.

Summary: The study demonstrates the direct 3D printing of extruded PEEK/HA composite filaments using Fused Filament Fabrication (FFF) technology, achieving uniform distribution of HA particles and high crystallinity. The mechanical properties of the printed samples are comparable to human femoral cortical bone, showing the feasibility of 3D printing PEEK/HA composites with up to 30wt% HA.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Applications of 3D-Printed PEEK via Fused Filament Fabrication: A Systematic Review

Rupak Dua et al.

Summary: PEEK is an organic polymer with excellent performance and ease of 3D printing, currently widely used in various fields. 3D-printed PEEK is mainly done through FFF or FDM printers, with most applications still in the research phase, but progressing towards commercialization in various industries.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-temperature 3D printing of polyetheretherketone products: Perspective on industrial manufacturing applications of super engineering plastics

Seong Je Park et al.

Summary: A refined additive manufacturing system was developed for high-temperature conditions to efficiently print PEEK material with enhanced mechanical properties through optimal process settings and controlled heating conditions. The feasibility of industrial applications was demonstrated by fabricating and testing product prototypes, confirming the excellent performance of PEEK material.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Biomedical

Structure, properties, and bioactivity of 3D printed PAEKs for implant applications: A systematic review

Cemile Basgul et al.

Summary: Additive manufacturing of high temperature polymers, specifically polyaryletherketones (PAEK), for medical implant applications is a growing area of research, with specific regulatory guidance being developed for hospital environments. In addition to the advantages of design freedom, PAEK implants benefit from enhanced biomechanical strength provided by cancellous bone-like bioactivity.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Heat transfer-based non-isothermal healing model for the interfacial bonding strength of fused filament fabricated polyetheretherketone

Cemile Basgul et al.

Summary: The study developed a 1D heat transfer model coupled with a non-isothermal healing model to predict the interlayer strength of FFF PEEK parts. Increasing the print bed temperature was found to increase the healing degree of the layers. The nozzle temperature had the most significant effect on layer healing, while chamber temperature had a smaller impact on the lower layers near the print bed.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polyetheretherketone with citrate potentiated influx of copper boosts osteogenesis, angiogenesis, and bacteria-triggered antibacterial abilities

Jianglong Yan et al.

Summary: Utilizing a pH-responsive coating made of polydopamine and copper-citrate nanoclusters on porous PEEK implants can enhance bone regeneration, vascular formation, and anti-infection properties. The release of high doses of copper and citrate at low pH values effectively kills bacteria and promotes osteogenesis in cells.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Biomedical

Modified porous microstructure for improving bone compatibility of poly-ether-ether-ketone

Ka Ioi Wong et al.

Summary: PEEK has been considered a promising implantation material due to its high mechanical and biological properties, but its poor bone compatibility is a challenge. Increasing the roughness of PEEK can improve its bone compatibility significantly, with the 40% porosity showing the highest bone compatibility in both in vitro and in vivo studies.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Review Engineering, Manufacturing

The role of additive manufacturing for biomedical applications: A critical review

Rakesh Kumar et al.

Summary: Additive manufacturing technology, also known as 3D printing, is rapidly revolutionizing the medical industry by providing customized solutions for patients, including dental implants, heart valves, and joint replacements. This technology creates physical models directly from CAD designs by layering materials, resulting in robust mechanical properties.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Review Materials Science, Composites

Polymer-based filament feedstock for additive manufacturing

Soyeon Park et al.

Summary: Fused deposition modeling (FDM) is a manufacturing method based on polymer melting and extrusion, which has attracted attention in various fields. Understanding the properties and behavior of polymer systems is crucial for using polymer composite materials in manufacturing and printing, and plays a key role in advancing additive manufacturing.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Enhancing CF/PEEK interfacial adhesion by modified PEEK grafted with carbon nanotubes

Hanxiong Lyu et al.

Summary: The interfacial adhesion between carbon fiber (CF) and polyetheretherketone (PEEK) was improved by modifying the interface with hydroxylated PEEK grafted onto multi-walled carbon nanotubes. The modified CFs showed increased surface roughness, more polar groups, decreased contact angle, and increased surface energy, leading to enhanced wettability and improved physical adhesion, resulting in significant enhancements in the mechanical properties of the CF/PEEK composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Biomedical

3D printed PEEK/HA composites for bone tissue engineering applications: Effect of material formulation on mechanical performance and bioactive potential

Faisal Manzoor et al.

Summary: PEEK is a biocompatible polymer used in biomedical applications, and HA has been added to improve bioactivity. 3D printing technology is increasingly used for patient specific devices. The addition of HA and doped HA to PEEK changed its melting and crystallization behavior, while mechanical properties remained relatively stable.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Surface porous poly-ether-ether-ketone based on three-dimensional printing for load-bearing orthopedic implant

Shuai Li et al.

Summary: A novel surface porous PEEK (SP-PEEK) was successfully fabricated through fused deposition modelling three-dimensional printing (FDM 3DP), allowing for adjustment of pore diameter and layer number to mimic human bones and improve osseointegration.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Mechanical property characterization of partially crystalline Poly-Ether-Ether-Ketone

Chao Zhang et al.

Summary: This study investigated the mechanical properties of partially crystalline Poly-Ether-Ether-Ketone between the glass transition and the cold crystallization, observing three stiffening behaviors influenced by temperature-induced crystallization. The results show that the stiffening behaviors are connected to the onset of crystallization, providing a new tool to approach and distinguish extrinsic and intrinsic properties during characterization. This conclusion could promote future implementation for constitutive modeling and corresponding simulation replicating the influence of temperature-induced crystallization.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Biomedical

Effects of printing path and material components on mechanical properties of 3D-printed polyether-ether-ketone/hydroxyapatite composites

Jibao Zheng et al.

Summary: The study demonstrated that increasing the HA content in PEEK/HA composites can enhance the modulus while reducing the strength and failure strain. Uniform distribution of HA particles in the composite matrix was achieved, making FFF technology a viable option for additive manufacturing of personalized bone substitutes.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Additively-manufactured PEEK/HA porous scaffolds with highly-controllable mechanical properties and excellent biocompatibility

Jibao Zheng et al.

Summary: Adjusting the pore size and HA content can tune the elastic modulus of PEEK/HA scaffolds in a wide range of 624.7-50.6 MPa. The scaffolds exhibit different mechanical properties in different printing directions, with the PEEK/HA scaffolds with microstructured surface promoting cell attachment and mineralization in vitro.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of fused deposition modeling process parameters using the Taguchi method to improve the tensile properties of 3D-printed polyether ether ketone

Timoumi Mohamed et al.

Summary: The mechanical properties of polyether ether ketone make it a strong competitor to replace metal, especially when processed through fused deposition modeling. By optimizing process parameters, such as nozzle temperature and print speed, the tensile properties can be significantly improved, leading to higher Young's modulus.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nutrient Element Decorated Polyetheretherketone Implants Steer Mitochondrial Dynamics for Boosted Diabetic Osseointegration

Hao Wang et al.

Summary: This study introduced a novel mitochondria-targeted orthopedic implant with Zn2+ and Sr2+ modulation capability for enhancing bone formation and osseointegration in diabetic patients. The implant demonstrated the ability to recuperate mitochondrial dynamic disequilibrium and dysfunction in hyperglycemic conditions, ultimately enhancing osteogenicity of osteoblasts. In vivo evaluations further confirmed that nutrient element coatings substantially augment bone remodeling and osseointegration.

ADVANCED SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

3D printing technology; methods, biomedical applications, future opportunities and trends

Yahya Bozkurt et al.

Summary: 3D printing technology, a miracle manufacturing method widely used in the medical field in recent years, is applied in surgery, pharmaceutical industry, disease modeling, development of customized implants and prostheses, organ printing, vet medicine, and tissue engineering applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fused deposition modeling of poly(ether ether ketone) scaffolds

Xiaohui Song et al.

Summary: This study utilized FDM technology and Taguchi methodology to manufacture PEEK scaffolds with varying pore sizes. Scanning electron microscopy revealed the rough surface of the scaffolds with interconnected pores, which are suitable for cell attachment and differentiation, while the mechanical properties of the scaffolds meet the loading requirements of human bones.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2021)

添加到收藏夹

Article Engineering, Biomedical

3D printing of PEEK-cHAp scaffold for medical bone implant

Bankole I. Oladapo et al.

Summary: The study aimed to enhance the adhesion between implants and surrounding tissues by incorporating PEEK with cHAp to fabricate PEEK-cHAp biocomposite, using a surface treatment strategy to create microporous architectures and investigate its mechanical and thermal strengths as well as in vitro cytotoxicity. Innovative technique was used to create porous nanostructure to promote biological integration.

BIO-DESIGN AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Mechanical

Test of Designing and Manufacturing a Polyether Ether Ketone Endoprosthesis for Canine Extremities by 3D Printing

Rosa Mendaza-DeCal et al.

Summary: The study evaluated the use of 3D printing internal PEEK parts for exo-endoprostheses, achieving optimal results through temperature settings and printing orientation, leading to ex vivo assessment showing the best pull-off strength outcomes for positive surfaces.

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2021)

添加到收藏夹

Article Engineering, Biomedical

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

Cemile Basgul et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Review Engineering, Mechanical

Fused deposition modelling: a review

Swapnil Vyavahare et al.

RAPID PROTOTYPING JOURNAL (2020)

添加到收藏夹

Article Engineering, Biomedical

Tuning the surface immunomodulatory functions of polyetheretherketone for enhanced osseointegration

Ang Gao et al.

BIOMATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

M. F. Arif et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK

D. Barba et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

添加到收藏夹

Article Engineering, Biomedical

Bionic design and verification of 3D printed PEEK costal cartilage prosthesis

Chenguang Zhang et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and evaluation of 3-D printed PEEK scaffolds containing Macropores by design

K. Elhattab et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Bioactive amorphous magnesium phosphate-polyetheretherketone composite filaments for 3D printing

Prabaha Sikder et al.

DENTAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preparation and Characterization for Antibacterial Activities of 3D Printing Polyetheretherketone Disks Coated with Various Ratios of Ampicillin and Vancomycin Salts

Ngi-Chiong Lau et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical characterization of a polymeric scaffold for bone implant

Bankole I. Oladapo et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Additive manufacturing potential for medical devices and technology

Mohammad Azam Ali et al.

CURRENT OPINION IN CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical characterization of biocompatible PEEK by FDM

Yachen Zhao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additively-manufactured poly-ether-ether-ketone (PEEK) lattice scaffolds with uniform microporous architectures for enhanced cellular response and soft tissue adhesion

Yanwen Su et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

3D-Printed PEEK Extravascular Stent in the Treatment of Nutcracker Syndrome: Imaging Evaluation and Short-Term Clinical Outcome

Dali He et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Biomedical

Nanomechanical analysis of medical grade PEEK and carbon fiber-reinforced PEEK composites

Sofia E. Arevalo et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Peng Wang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Polymer Science

A comprehensive evaluation of flexible FDM/FFF 3D printing filament as a potential material in medical application

Agnieszka Harynska et al.

EUROPEAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Engineering, Biomedical

3D printed porous PEEK created via fused filament fabrication for osteoconductive orthopaedic surfaces

H. Spece et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Engineering, Biomedical

Mechanical properties and cytotoxicity of hierarchical carbon fiber-reinforced poly (ether-ether-ketone) composites used as implant materials

Wen Qin et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Medicine, General & Internal

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

Xingting Han et al.

JOURNAL OF CLINICAL MEDICINE (2019)

添加到收藏夹

Article Engineering, Biomedical

In vivo and in vitro bioactivity of a precursor of apatite treatment on polyetheretherketone

Kazutaka Masamoto et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Review Food Science & Technology

3D printing of meat

Arianna Dick et al.

MEAT SCIENCE (2019)

添加到收藏夹

Article Engineering, Industrial

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Peng Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

Bin Hu et al.

MECHANICS OF MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design and Biomechanical Verification of Additive Manufactured Composite Spinal Cage Composed of Porous Titanium Cover and PEEK Body

Kwun-Mook Lim et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Engineering, Manufacturing

Enhancing CF/PEEK composites by CF decoration with polyimide and loosely-packed CNT arrays

Elwathig A. M. Hassan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile mechanical characteristics of CF/PEEK biocomposites with different surface modifications

Jiaheng Mao et al.

MICRO & NANO LETTERS (2019)

添加到收藏夹

Article Crystallography

Isothermal crystallization of poly(ether ether ketone) with different molecular weights over a wide temperature range

Jiho Seo et al.

POLYMER CRYSTALLIZATION (2019)

添加到收藏夹

Article Engineering, Biomedical

Surface bioactivation of PEEK by neutral atom beam technology

Joseph Khoury et al.

BIOACTIVE MATERIALS (2019)

添加到收藏夹

Article Engineering, Biomedical

Fabrication of Bioactive Fiber-reinforced PEEK and MXD6 by Incorporation of Precursor of Apatite

Takeshi Yabutsuka et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Additive layer manufacturing of poly (ether ether ketone) via FDM

Marianna Rinaldi et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Composites

Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface

Junlin Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Controllable interlayer shear strength and crystallinity of PEEK components by laser-assisted material extrusion

Meng Luo et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure-property relationships for 3D-printed PEEK intervertebral lumbar cages produced using fused filament fabrication

Cemile Basgul et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Chemistry, Physical

Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling

Xiaohu Deng et al.

MATERIALS (2018)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application

Philipp Honigmann et al.

BIOMED RESEARCH INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance of biocompatible PEEK processed by fused deposition additive manufacturing

M. F. Arif et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of micro-notches on the fatigue strength and crack propagation of unfilled and short carbon fiber reinforced PEEK

A. Avanzini et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacture of PEEK cranial implants: Manufacturing considerations versus accuracy and mechanical performance

S. Berretta et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Screw extrusion-based additive manufacturing of PEEK

Jian-Wei Tseng et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Manufacturing

Searching for effective compatibilizing agents for the preparation of poly (ether ether ketone)/graphene nanocomposites with enhanced properties

A. Martinez-Gomez et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mechanical performance of PEEK produced by additive manufacturing

T. J. Hoskins et al.

POLYMER TESTING (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Enhancement of the Mechanical Properties of Hydroxyapatite/Sulphonated Poly Ether Ether Ketone Treated Layer for Orthopaedic and Dental Implant Application

Roohollah Sharifi et al.

INTERNATIONAL JOURNAL OF BIOMATERIALS (2018)

添加到收藏夹

Review Health Care Sciences & Services

3D printing materials and their use in medical education: a review of current technology and trends for the future

Justine Garcia et al.

BMJ SIMULATION & TECHNOLOGY ENHANCED LEARNING (2018)

添加到收藏夹

Article Engineering, Biomedical

Plasma ion implantation enabled bio-functionalization of PEEK improves osteoblastic activity

Edgar A. Wakelin et al.

APL BIOENGINEERING (2018)

添加到收藏夹

Article Engineering, Biomedical

Biofunctional Mg coating on PEEK for improving bioactivity

Xiaoming Yu et al.

BIOACTIVE MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

Porous titanium-coated polyetheretherketone implants exhibit an improved bone-implant interface: an in vitro and in vivo biochemical, biomechanical, and histological study

Boyle C. Cheng et al.

MEDICAL DEVICES-EVIDENCE AND RESEARCH (2018)

添加到收藏夹

Article Engineering, Biomedical

Enhanced bioactivity and osseointegration of PEEK with accelerated neutral atom beam technology

Joseph Khoury et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

Augmenting the bioactivity of polyetheretherketone using a novel accelerated neutral atom beam technique

S. Ajami et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)

添加到收藏夹

Article Engineering, Mechanical

Measuring fatigue crack growth and closure in Polyether Ether Ketone (PEEK)

Tinsley Colmer et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

添加到收藏夹

Article Engineering, Industrial

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Chuncheng Yang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Bioactive carbon-PEEK composites prepared by chemical surface treatment

Toshiki Miyazaki et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Effect of pores formation process and oxygen plasma treatment to hydroxyapatite formation on bioactive PEEK prepared by incorporation of precursor of apatite

Takeshi Yabutsuka et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Physicochemical and biological assessment of PEEK composites embedding natural amorphous silica fibers for biomedical applications

Patricia R. Monich et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

添加到收藏夹

Article Polymer Science

Characterization of thermally annealed PEEK and CFR-PEEK composites: Structure-properties relationships

Marco Regis et al.

POLYMER DEGRADATION AND STABILITY (2017)

添加到收藏夹

Article Mechanics

Temperature, Strain Rate and Pressure Sensitivity of the Polyetheretherketone's Yield Stress

Zakaria El-Qoubaa et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Impact of the heating/quenching process on the mechanical, optical and thermodynamic properties of polyetheretherketone (PEEK) films

Lisa Bodden et al.

DENTAL MATERIALS (2017)

添加到收藏夹

Article Biophysics

Engineering thermoplastics for additive manufacturing: a critical perspective with experimental evidence to support functional applications

Gianluca Cicala et al.

JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

Design and fabrication of 3D-printed anatomically shaped lumbar cage for intervertebral disc (IVD) degeneration treatment

T. Serra et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Mechanical

Sheet metal forming using FDM rapid prototype tool

Ismail Durgun

RAPID PROTOTYPING JOURNAL (2015)

添加到收藏夹

Article Chemistry, Physical

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

Wenzheng Wu et al.

MATERIALS (2015)

添加到收藏夹

Article Engineering, Manufacturing

Extrusion-based additive manufacturing of PEEK for biomedical applications

Mohammad Vaezi et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation, Characterization, In Vitro Bioactivity, and Cellular Responses to a Polyetheretherketone Bioactive Composite Containing Nanocalcium Silicate for Bone Repair

Rui Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Engineering, Biomedical

Polyetheretherketone/nano-fluorohydroxyapatite composite with antimicrobial activity and osseointegration properties

Lixin Wang et al.

BIOMATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing

W. Z. Wu et al.

MATERIALS RESEARCH INNOVATIONS (2014)

添加到收藏夹

Article Mechanics

Investigation of the dynamic mechanical behavior of polyetheretherketone (PEEK) in the high stress tensile regime

M. Berer et al.

MECHANICS OF TIME-DEPENDENT MATERIALS (2014)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation of FDM process for improvement of mechanical properties and production cost

Ismail Durgun et al.

RAPID PROTOTYPING JOURNAL (2014)

添加到收藏夹

Article Engineering, Biomedical

Cytocompatibility, osseointegration, and bioactivity of three-dimensional porous and nanostructured network on polyetheretherketone

Ying Zhao et al.

BIOMATERIALS (2013)

添加到收藏夹

Article Engineering, Biomedical

Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling

Jyrki Korpela et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Getting rid of the wires: Curved Layer Fused Deposition Modeling in Conductive Polymer Additive Manufacturing

Olaf Diegel et al.

MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3 (2011)

添加到收藏夹

Article Engineering, Mechanical

Design and manufacture of a Formula SAE intake system using fused deposition modeling and fiber-reinforced composite materials

Ryan Ilardo et al.

RAPID PROTOTYPING JOURNAL (2010)

添加到收藏夹

Review Engineering, Biomedical

PEEK biomaterials in trauma, orthopedic, and spinal implants

Steven M. Kurtz et al.

BIOMATERIALS (2007)

添加到收藏夹

Article Polymer Science

The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response

P. J. Rae et al.

POLYMER (2007)

添加到收藏夹

Article Cell Biology

Effect of beta TCP filled polyetheretherketone on osteoblast cell proliferation in vitro

L Petrovic et al.

JOURNAL OF BIOMEDICAL SCIENCE (2006)

添加到收藏夹

Article Engineering, Biomedical

In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites

SC Yu et al.

BIOMATERIALS (2005)

添加到收藏夹

Article Engineering, Mechanical

Tension-tension fatigue behavior of hydroxyapatite reinforced polyetheretherketone composites

SM Tang et al.

INTERNATIONAL JOURNAL OF FATIGUE (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling

SJ Kalita et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)

添加到收藏夹

Article Engineering, Biomedical

Tensile properties, tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants

MS Abu Bakar et al.

BIOMATERIALS (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tensile properties and microstructural analysis of spheroidized hydroxyapatite-poly (etheretherketone) biocomposites

MS Abu Bakar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites

MS Abu Bakar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Polymer Science

Thermal properties, structure and morphology of PEEK/thermotropic liquid crystalline polymer blends

M Naffakh et al.

POLYMER INTERNATIONAL (2003)

添加到收藏夹

Article Engineering, Manufacturing

Effect of layer orientation on mechanical properties of rapid prototyped samples

OS Es-Said et al.

MATERIALS AND MANUFACTURING PROCESSES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.