4.7 Article

Recyclable molten-salt-assisted synthesis of N-doped porous carbon nanosheets from coal tar pitch for high performance sodium batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Multidisciplinary

Structural Engineering in Graphite-Based Metal-Ion Batteries

Pan Luo et al.

Summary: Graphite-derived carbon materials are widely used in metal-ion batteries for their good mechanical and electrical properties, cost effectiveness, light weight, and environmental friendliness. Various studies have been conducted to enhance the metal-ion storage capability of graphite and its derivatives.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Environmental

Synthesis of presodiated B, N Co-doped carbon materials and application in sodium ions batteries with enhanced initial coulombic efficiency

Yihua Tang et al.

Summary: This study presents a novel approach to achieve simultaneous presodiation and B, N co-doping within carbon materials, leading to promising Na+ storage capability and enhanced initial Coulombic efficiency (ICE) up to 96.1%.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Electrochemistry

Biomass hard carbon of high initial coulombic efficiency for sodium-ion batteries: Preparation and application

Shuai Guo et al.

Summary: In this study, biomass hard carbon materials were prepared from camphor wood residues using a carbonization method with low heating rate, and the influence of heating rate on initial coulombic efficiency was explored. A lower heating rate resulted in biomass hard carbon with fewer defects, reducing the initial irreversible capacity loss and improving the initial coulombic efficiency to 82.8%.

ELECTROCHIMICA ACTA (2022)

Article Energy & Fuels

Adjusting hydrophily and aromaticity strategy for pitch-based hierarchical porous carbon and its application in flexible supercapacitor

Yikai Yang et al.

Summary: By introducing hydrophilic functional groups and adjusting aromatic structure, the activation effect and pore structure development of coal tar pitch (CTP) can be improved. The modified CTP-derived porous carbon materials exhibit high specific surface area, hierarchical pore structure, and certain nitrogen content.
Article Chemistry, Physical

Microstructure regulation of pitch-based soft carbon anodes by iodine treatment towards high-performance potassium-ion batteries

Chang Liu et al.

Summary: In this study, crosslinked pitch-based soft carbon nanosheets were synthesized through the iodination/dehydroiodination process at low temperature and carbonization with NaCl template. The optimized sample showed higher reversible capacity and cycling stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Materials Science, Multidisciplinary

Carbonate materials synthesis using molten salt templates

Haijia Zhao et al.

Summary: Molten salts can be used as both solvents and templates to synthesize carbonates with diverse morphologies, and the templates can be easily removed by water.

JOURNAL OF MATERIALS SCIENCE (2022)

Review Chemistry, Physical

Perovskite solar cells based self-charging power packs: Fundamentals, applications and challenges

Yang Yang et al.

Summary: Perovskite solar cells are strong contenders for next generation photovoltaic technology due to their low cost, simple structure, and high efficiency. However, their intermittent nature requires integration with energy storage systems, such as supercapacitors or lithium-ion batteries, to provide sustainable and reliable power output.

NANO ENERGY (2022)

Article Electrochemistry

N/O Co-Doped Hard Carbon Derived from Cocklebur Fruit for Sodium-Ion Storage

Gejun Shi et al.

Summary: Using cocklebur fruit as the precursor, N/O co-doped hard carbon with high sodium-ion storage capability was synthesized through pyrolysis. The storage mechanism involved the adsorption of sodium ions on defect sites, filling of micropores, and embedding in graphite sheets.

CHEMELECTROCHEM (2022)

Article Chemistry, Physical

Recent progress and future perspective on practical silicon anode-based lithium ion batteries

Lin Sun et al.

Summary: This article provides a brief overview of the development history of silicon anode lithium-ion batteries and highlights the challenges and countermeasures in practical applications. Solutions are proposed for structure regulation, interface modulation, and novel binder and electrolyte design, with a focus on future research on full cell performances and all solid-state batteries.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

The lithiophobic-to-lithiophilic transition on the graphite towards ultrafast-charging and long-cycling lithium-ion batteries

Peng Du et al.

Summary: The extensive use of electric vehicles has increased the demand for fast-charging lithium-ion batteries. However, conventional graphite anodes face challenges during fast charging. In this study, a lithiophilic hard carbon-riveted graphite (HCRG) anode is designed to overcome the issues caused by dead lithium and meet the requirements of fast charging. By constructing a riveted heterostructure, the anode exhibits excellent rate performance and fast-charging performance.

ENERGY STORAGE MATERIALS (2022)

Review Engineering, Environmental

Plant-derived hard carbon as anode for sodium-ion batteries: A comprehensive review to guide interdisciplinary research

Dario Alvira et al.

Summary: This review provides a comprehensive overview of the application of plant-derived hard carbon in sodium-ion batteries. Sodium-ion batteries, as a candidate for replacing lithium-ion batteries, still face challenges in designing high-performance anodes and fully understanding the sodium storage mechanisms.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Electrochemistry

Sodium-ion batteries: Chemistry of biomass derived disordered carbon in carbonate and ether-based electrolytes

K. Bhawana et al.

Summary: The research indicates the potential application of biomass-derived carbon anodes in sodium battery technology, especially when considering the impact of electrolytes on electrochemical performance. Ether-based electrolyte shows higher efficiency compared to carbonate-based electrolyte, and the generation of a thin and homogeneous SEI layer is crucial for enhancing reversibility and storage performance.

ELECTROCHIMICA ACTA (2022)

Review Chemistry, Multidisciplinary

Multiple Active Sites Carbonaceous Anodes for Na+Storage: Synthesis, Electrochemical Properties and Reaction Mechanism Analysis

Yun Lu et al.

Summary: This review comprehensively discusses the use of active site carbonaceous anodes to enhance the performance of sodium-ion batteries, covering categorization based on Na storage mechanism, concepts of active site types, analysis methods, and future development directions. It addresses the advantages, issues, and potential solutions for multiple active site carbonaceous Na anodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Enhanced Potassium-Ion Storage of the 3D Carbon Superstructure by Manipulating the Nitrogen-Doped Species and Morphology

Yanhua Li et al.

Summary: In this study, an eco-efficient synthetic route was developed to create carbon superstructures with enhanced nitrogen-rich active facets for improved potassium-ion storage capabilities. By regulating the nitrogen doping types and morphology, the performance of the carbon superstructures was significantly enhanced.

NANO-MICRO LETTERS (2021)

Article Energy & Fuels

N, S self-doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries

Qun Li et al.

Summary: The nitrogen and sulfur self-doped porous carbon anode material synthesized by thermal pyrolysis at 1000 degrees Celsius exhibits excellent electrochemical performance, high reversible specific capacity, and cycling stability, making it a promising candidate for cheap and high-performance anode materials for sodium ion batteries.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Physical

Sodium hypophosphite-assist pyrolysis of coal pitch to synthesis P-doped carbon nanosheet anode for ultrafast and long-term cycling sodium-ion batteries

Wei Sun et al.

Summary: In this study, an extremely ultrafast P-doped carbon nanosheet anode with graphene-like wrinkles and sheet thickness of about 8 nm was synthesized for sodium-ion battery. The carbon nanosheet anode showed high-rate capacity and long-term cycling stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Electrochemistry

Humic acid resin-based amorphous porous carbon as high rate and cycle performance anode for sodium-ion batteries

Zhendong Jiang et al.

Summary: The study successfully developed an amorphous porous carbon material as an anode material for sodium-ion batteries, demonstrating excellent electrochemical performance and cycling stability. By controlling the ratio of mesoporous and micropores, the Na+ storage performance of the material can be promoted.

ELECTROCHIMICA ACTA (2021)

Article Physics, Multidisciplinary

All-carbon-based semimetal for sodium-ion batteries anode material: A first principle study

Miaogen Chen et al.

Summary: The carbon structure bco-C-16 shows great potential to be an excellent anode material for NIBs, with high stability, high maximum capacity, low sodium ion diffusion energy barrier, and good conductivity.

PHYSICS LETTERS A (2021)

Article Chemistry, Applied

Multi-heteroatom doped porous carbon derived from insect feces for capacitance-enhanced sodium-ion storage

Chen Chen et al.

Summary: In this study, multi-heteroatom self-doped hierarchical porous carbon (HHPC) with a honeycomb-like structure was prepared as an anode for sodium ion batteries. The HHPC exhibited excellent electrochemical performance, showing potential for practical applications in the field of energy storage.

JOURNAL OF ENERGY CHEMISTRY (2021)

Review Chemistry, Applied

Molten salt synthesis of porous carbon and its application in supercapacitors: A review

Zhongya Pang et al.

Summary: Carbon materials play an important role in supercapacitor applications due to their large surface area, low price, and stable physicochemical properties. Novel synthesis strategies for porous carbon materials have been developed, with molten salt strategy showing great potential. The review focuses on various molten salt synthesis strategies and their applications in producing carbon materials with tailored properties for supercapacitors, discussing reaction mechanisms, recent advances, and challenges in the field.

JOURNAL OF ENERGY CHEMISTRY (2021)

Review Chemistry, Physical

A Reanalysis of the Diverse Sodium Species in Carbon Anodes for Sodium Ion Batteries: A Thermodynamic View

Zhihong Tian et al.

Summary: Sodium ion batteries are being extensively researched as a potential alternative to lithium batteries, but designing high-performance electrode materials remains a challenge. The different properties of sodium compared to lithium require a thorough understanding of its storage mechanisms and resolution of controversial discussions.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Energy Storage Mechanism, Challenge and Design Strategies of Metal Sulfides for Rechargeable Sodium/Potassium-Ion Batteries

Qingguang Pan et al.

Summary: This review discusses the energy storage mechanism, challenges, and design strategies of metal sulfides (MSx) in rechargeable sodium/potassium-ion batteries, addressing the performance limitations faced by MSx. Various design strategies for improving the comprehensive electrochemical performance of SIBs/PIBs using MSx are highlighted, with prospects for overcoming imminent challenges and predicting future directions in the field.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

N-rich biomass carbon derived from hemp as a full carbon-based potassium ion hybrid capacitor anode

Pengfei Wang et al.

Summary: In this study, an innovative nitrogen-rich biomass carbon (N-CHC) with high specific surface area and nitrogen content is prepared using a novel method. It shows excellent performance as a potassium ion hybrid capacitor half-cell anode, with good rate performance and a higher diffusion coefficient, indicating potential for large-scale applications.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Enhanced electrochemical production and facile modification of graphite oxide for cost-effective sodium ion battery anodes

Yubai Zhang et al.

Summary: The study demonstrates a green and simple method to prepare cost-effective and stable graphitic SIB anodes. Thermally processed electrochemical graphite oxide shows high reversible capacity and low fading, offering a promising approach for industrial production of low-cost anodes for sodium-ion batteries.

CARBON (2021)

Article Materials Science, Multidisciplinary

Experimental design and theoretical evaluation of nitrogen and phosphorus dual-doped hierarchical porous carbon for high-performance sodium-ion storage

Chen Chen et al.

Summary: In this study, nitrogen and phosphorus co-doped porous carbon was prepared using starch and ammonium polyphosphate as raw materials, and applied as the anode for sodium-ion batteries, achieving excellent electrochemical performance. By doping nitrogen and phosphorus elements, the adsorption capacity of the carbon material was enhanced, and the diffusion barrier of sodium ions was reduced, providing a new research direction for heteroatom doping and carbon material modification.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

A Robust Solid-Solid Interface Using Sodium-Tin Alloy Modified Metallic Sodium Anode Paving Way for All-Solid-State Battery

Jin An Sam Oh et al.

Summary: All-solid-state alkaline metal batteries are considered ideal high energy density storage systems, but require stable physical contact between the anode and solid-state electrolyte. By using a composite anode and enhancing Na+ diffusion kinetics, the tendency to form pores during desodiation can be reduced, leading to stable cycling.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Extra Sodiation Sites in Hard Carbon for High Performance Sodium Ion Batteries

Qingmeng Gan et al.

Summary: By introducing a high concentration of pyridine N and constructing a 3D hard carbon with a multistage pore structure, extra radical sites were provided to improve the electrochemical performance of hard carbon as an anode material for sodium-ion batteries.

SMALL METHODS (2021)

Review Chemistry, Physical

Recent Advances in 3D Array Anode Materials for Sodium-Ion Batteries

Yao Chen et al.

Summary: Sodium-ion batteries are promising for next-generation energy storage due to their abundance and low cost, but they face challenges in reaction kinetics, cycling performance, and energy density compared to lithium-ion batteries. Developing electrode materials with large capacity and stability is crucial for improving sodium-ion battery performance.

ACTA PHYSICO-CHIMICA SINICA (2021)

Review Chemistry, Physical

An overview on Sb-based intermetallics and alloys for sodium-ion batteries: trends, challenges and future prospects from material synthesis to battery performance

Shreya Sarkar et al.

Summary: Sodium-ion batteries (SIBs) are considered as a potential alternative to lithium-ion batteries (LIBs) due to their cost-effectiveness and the abundant availability of sodium in the Earth's crust. Metal alloy based anode materials, particularly those containing antimony (Sb), are emerging as promising materials for SIBs thanks to their high theoretical capacity and judicious reaction potential. However, the development of SIBs is hindered by volume changes associated with the sodiation/desodiation reactions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

N-Doped carbon encapsulating Bi nanoparticles derived from metal-organic frameworks for high-performance sodium-ion batteries

Lin Chen et al.

Summary: In this study, Bi nanoparticles embedded in N-doped carbon matrix composite Bi@NC were successfully prepared using a simple one-step method. The composite exhibited excellent electrochemical performance, effectively alleviating the volume expansion issue during sodiation/desodiation processes, and showing outstanding cycling stability and rate performance.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Analytical

Molten salt synthesis of hierarchical porous carbon from wood sawdust for supercapacitors

Lvye Yang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Article Nanoscience & Nanotechnology

Insights into the Surface Oxygen Functional Group-Driven Fast and Stable Sodium Adsorption on Carbon

Hanqing Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Salt-Assisted Synthesis of 2D Materials

Liang Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Ultrastable Surface-Dominated Pseudocapacitive Potassium Storage Enabled by Edge-Enriched N-Doped Porous Carbon Nanosheets

Fei Xu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

Fabrication of porous Na3V2(PO4)3/reduced graphene oxide hollow spheres with enhanced sodium storage performance

Jingyi Xu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Multidisciplinary

A Yolk-Shell-Structured FePO4 Cathode for High-Rate and Long-Cycling Sodium-Ion Batteries

Zhuangzhuang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Physical

Recent advances in nanostructured carbon for sodium-ion batteries

Huimin Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Superior sodium-storage behavior of flexible anatase TiO2 promoted by oxygen vacancies

Qiao Ni et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Multidisciplinary

Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium-Ion Batteries

Qiannan Liu et al.

Article Multidisciplinary Sciences

Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries

Zheng-Long Xu et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Physical

A S/N-doped high-capacity mesoporous carbon anode for Na-ion batteries

Xiu Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Nitrogen-doped hollow carbon nanospheres towards the application of potassium ion storage

Jiafeng Ruan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Adsorption dominant sodium storage in three-dimensional coal-based graphite microcrystal/graphene composites

Mengmeng Kang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Nanoscience & Nanotechnology

Remarkable Effect of Sodium Alginate Aqueous Binder on Anatase TiO2 as High-Performance Anode in Sodium Ion Batteries

Liming Ling et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Engineering, Environmental

Rational design of high-performance sodium-ion battery anode by molecular engineering of coal tar pitch

Yuwei Wang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Physical

Pitch-derived amorphous carbon as high performance anode for sodium-ion batteries

Yunming Li et al.

ENERGY STORAGE MATERIALS (2016)

Article Chemistry, Multidisciplinary

VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data

Koichi Momma et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2011)

Review Green & Sustainable Science & Technology

High-temperature phase change materials for thermal energy storage

Murat M. Kenisarin

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)