4.4 Article

Molecular dynamics simulation of the effect of the thermal and mechanical properties of addition liquid silicone rubber modified by carbon nanotubes with different radii

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Electrical & Electronic

Transient thermal network model for train-induced wind cooling dry-type on-board traction transformer in electric multiple units

Lijun Zhou et al.

Summary: A time-saving transient thermal model is proposed for dry-type on-board traction transformers (D-OBTT) in this paper. By considering the coexistence of non-fully and fully developed state of train-induced wind and the addition heat flow in the solid domain, a framework of the transient thermal network model (TTNM) is established. Furthermore, a novel formula for calculating the length of non-fully developed section based on computational fluid dynamics (CFD) parametric sweeps is introduced. The accuracy of TTNM is validated by experimental setup of D-OBTT, and the time consumption is significantly reduced compared with CFD.

HIGH VOLTAGE (2023)

Article Engineering, Electrical & Electronic

A Lightweight Optimization Study for Large Capacity Dry-Type On-board Traction Transformer of EMU Based on CFD and RSM

Shuai Yuan et al.

Summary: This article presents an optimization method for large capacity D-OBTT, which includes a user-defined function-based computational fluid dynamics modeling method to accurately obtain the winding hotspot temperature. Response surface models of the winding hotspot temperature are also proposed. A lightweight optimization of a 6.3-MVA D-OBTT is performed, and the influence of design parameters on weight reduction is studied.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2023)

Article Engineering, Electrical & Electronic

Modeling Method for Thermal Field of Turbulent Cooling Dry-Type On-Board Traction Transformer in EMUs

Shuai Yuan et al.

Summary: This article proposes an efficient method for calculating the thermal characteristics of dry-type OBTT, and the experimental validation shows that the proposed method can quickly obtain the temperature distribution and hot-spot location, and be used for thermal analysis of specific OBTTs.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2022)

Article Engineering, Electrical & Electronic

Molecular Dynamics on Cracking Mechanism of Oil-Pressboard Insulation Under Electric-Thermal Coupling

Zhongyu Zhao et al.

Summary: This article investigates the mechanism of insulation aging under electro-thermal coupling through combined macroscopic testing and molecular dynamics simulations. The experimental results show that thermal stress is the primary factor in insulation paper aging, with increased acid value and furfural formation rate in the oil and decreased polymerization degree of the insulation paper after electric-thermal aging. Molecular dynamics simulations reveal that pyrolysis increases bond energy while the electric field increases the susceptibility of chemical bonds in cellulose molecules to breakage.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2022)

Article Polymer Science

Thermally conductive h-BN/EHTPB/epoxy composites with enhanced toughness for on-board traction transformers

Shuai Yuan et al.

Summary: A composite material with improved thermal conductivity using h-BN and improved toughness using EHTPB was prepared in this study. The composite exhibited increased elongation at break and impact strength compared to the composite without EHTPB. The thermal and electrical performances of the composite were also satisfactory, showing potential for application in on-board electrical equipment.

E-POLYMERS (2022)

Article Engineering, Electrical & Electronic

Properties of Epoxy-POSS Composites at Low Temperature Based on Molecular Dynamics Simulation

Meng Xiao et al.

Summary: Nanoparticles can enhance the properties of epoxy resin at low temperature, particularly in terms of mechanical properties. The organic groups in POSS nanoparticles have varying effects on the epoxy resin.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

Article Polymer Science

Study on the thermal properties and insulation resistance of epoxy resin modified by hexagonal boron nitride

Lei Guo et al.

Summary: The study found that doping h-BN can significantly increase the thermal conductivity and glass transition temperature of epoxy resin composites, but it may reduce their insulation performance. When doping 40 phr h-BN, the thermal conductivity increased by 138% and the glass transition temperature increased by 76 K.

E-POLYMERS (2021)

Article Computer Science, Information Systems

Molecular Dynamics Simulations of Interface Properties and Key Physical Properties of Nanodielectrics Manufactured With Epoxy Resin Doped With Metal Nanoparticles

Tianyu Wang et al.

Summary: This study utilizes molecular dynamics simulation to analyze the micro-mechanisms of Ag-nanoparticle-doped epoxy resin, revealing that the atoms in the surface layer of nanoparticles become amorphous under certain conditions, altering the relative permittivity of the epoxy matrix. Additionally, doping with Ag nanoparticles can enhance certain thermal and mechanical properties.

IEEE ACCESS (2021)

Article Engineering, Electrical & Electronic

Structure-property relationship in silicone rubber nanocomposites reinforced with carbon nanomaterials for sensors and actuators

Vineet Kumar et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Article Engineering, Mechanical

A molecular dynamics study to predict the friction and wear behavior of carbon nanotube reinforced styrene-butadiene rubber

Raj Chawla et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)

Article Materials Science, Composites

Effect of particle size and size distribution on the permeability of soft magnetic liquid silicone rubber composites

Dirk W. Schubert et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Article Engineering, Electrical & Electronic

Effect of residue formed during the AC and DC dry-band arcing on silicone rubber filled with natural silica

Daouda Kone et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2019)

Article Automation & Control Systems

Fabrication of the Fresnel lens with liquid silicone rubber using rapid injection mold

Chil-Chyuan Kuo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Article Biochemistry & Molecular Biology

A molecular dynamics study on Young's modulus and tribology of carbon nanotube reinforced styrene-butadiene rubber

Raj Chawla et al.

JOURNAL OF MOLECULAR MODELING (2018)

Article Materials Science, Multidisciplinary

A molecular dynamic simulation method to elucidate the interaction mechanism of nano-SiO2 in polymer blends

Qinghua Wei et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Article Engineering, Electrical & Electronic

Comprehensive Topological Overview of Rolling Stock Architectures and Recent Trends in Electric Railway Traction Systems

Deepak Ronanki et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2017)

Article Engineering, Manufacturing

Effects of CNT diameter on mechanical properties of aligned CNT sheets and composites

Tran Huu Nam et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Engineering, Electrical & Electronic

Micro Characterization and Degradation Mechanism of Liquid Silicone Rubber Used for External Insulation

Can Chen et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2015)

Article Engineering, Manufacturing

Layered double hydroxide/multiwalled carbon nanotube hybrids as reinforcing filler in silicone rubber

B. Pradhan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Article Engineering, Manufacturing

Carbon nanotubes based high temperature vulcanized silicone rubber nanocomposite with excellent elasticity and electrical properties

Songmin Shang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Article Nanoscience & Nanotechnology

Looking over Liquid Silicone Rubbers: (1) Network Topology vs Chemical Formulations

Etienne Delebecq et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Article Polymer Science

Sensing Behaviors of Polymer/Carbon Nanotubes Composites Prepared in Reversed Microemulsion Polymerization

Zhenhua Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Article Materials Science, Multidisciplinary

Preparation and dielectric properties of surface modified TiO2/silicone rubber nanocomposites

Zhi-Min Dang et al.

MATERIALS LETTERS (2011)

Article Nanoscience & Nanotechnology

Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes

Darren J. Lipomi et al.

NATURE NANOTECHNOLOGY (2011)

Review Polymer Science

Multiwall carbon nanotube elastomeric composites: A review

Liliane Bokobza

POLYMER (2007)

Article Nanoscience & Nanotechnology

A novel sintering-dissolution process for manufacturing Al foams

YY Zhao et al.

SCRIPTA MATERIALIA (2001)