4.7 Article

A comprehensive study for Al2O3 nanofluid cooling effect on the electrical and thermal properties of polycrystalline solar panels in outdoor conditions

出版社

SPRINGER HEIDELBERG
DOI: 10.1007/s11356-023-25928-3

关键词

Photovoltaic panels cooling; Al2O3 nanoparticles; Nanofluid cooling; PV efficiency enhancement

向作者/读者索取更多资源

Photovoltaic technology is an effective and promising renewable energy source, but its efficiency is affected by temperature. This study evaluates the electrical and thermal performances of a photovoltaic thermal (PVT) system under water and aluminum oxide nanofluid cooling. Increasing the mass flow rate and nanoparticle concentration improves the electrical conversion efficiency of the PV modules. Water and nanofluid cooling can reduce the panel temperature.
Photovoltaic (PV) technology is considered one of the most effective and promising renewable sources of energy. The PV system's efficiency strongly depends on its operating temperature, which acts as a defect to the electrical efficiency by increasing over 25 degrees C. In this work, a comparison was performed between three traditional polycrystalline solar panels simultaneously at the same time and under the same weather conditions. The electrical and thermal performances of the photovoltaic thermal (PVT) system integrated with a serpentine coil configured sheet with a plate thermal absorber setup are evaluated using water and aluminum oxide nanofluid. For higher mass flow rates and nanoparticle concentrations, an improvement in the PV modules short-circuit current (I-sc) and open-circuit voltage (V-oc) yield and electrical conversion efficiency is achieved. The enhancement in the PVT electrical conversion efficiency is 15.5%. For 0.05% volume concentration of Al2O3 and flow rate of 0.07 kg/s, an enhancement of 22.83% of the temperature of PVT panels' surface over the reference panel has been obtained. An uncooled PVT system reached a maximum panel temperature of 75.5 degrees C at noontime and obtained an average electrical efficiency of 12.156%. Water and nanofluid cooling reduce the panel temperature by 10.0 degrees C and 20.0 degrees C at noontime, respectively.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据