☆ 4.5 Article

Sintering behavior of combusted iron powder in a packed bed reactor with nitrogen and hydrogen

PARTICUOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Minimum fluidization velocity and reduction behavior of combusted iron powder in a fluidized bed

C. J. M. Hessels et al.

Summary: In this study, the fluidization and reduction behavior of micron-sized iron oxide powder produced by iron combustion were investigated in a lab-scale cylindrical fluidized bed. The minimum fluidization velocity (umf) was found to stabilize above a normalized static bed height of 0.5 H/D. Experimental results deviated from the Ergun correlation at temperatures above 560 K, prompting the proposal of a new correlation that takes cohesive inter-particle solid bridge force into account. Reduction experiments revealed gradual defluidization at temperatures exceeding 800 K, with a maximum reduction degree of 61% achieved at 807 K and 100 vol% H2.

FUEL (2023)

添加到收藏夹

Article Thermodynamics

A quantitative analysis of the ignition characteristics of fine iron particles

XiaoCheng Mi et al.

Summary: This study quantitatively examines the ignition characteristics of fine iron particles, finding that the ignition temperature depends on the ratio between the initial oxide layer thickness and particle size. The ignition delay time follows a d(2)-law scaling with particle size. The findings contribute to the understanding of iron particle ignition behavior.

COMBUSTION AND FLAME (2022)

添加到收藏夹

Article Engineering, Chemical

Reduction kinetics of combusted iron powder using hydrogen

C. J. M. Hessels et al.

Summary: Hydrogen reduction of iron oxide fines produced by iron combustion was investigated using thermogravimetric analysis (TGA). The results showed that the morphology of the reduction products depended on temperature but not on the hydrogen partial pressure, with higher temperatures leading to larger pore sizes. Based on analysis, the reduction process could be described by a single-step phase boundary controlled reaction at temperatures below 600℃, and a multi-step mechanism was required for reactions at higher temperatures.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase transformations and microstructure evolution during combustion of iron powder

Laurine Choisez et al.

Summary: For the successful transition to sustainable carbon-free energy carriers, a safe and high-density energy storage technology is needed. This study investigates the combustion of iron powders and its morphological and microstructural evolution. Iron powder combustion resulted in spherical hollow particles with a complex microstructure, and partial evaporation was observed. The cracking at the end of the combustion process led to mostly open porosity, which is favorable for subsequent reduction.

ACTA MATERIALIA (2022)

添加到收藏夹

Review Thermodynamics

Some fundamental aspects of laminar flames in nonvolatile solid fuel suspensions

Samuel Goroshin et al.

Summary: This paper critically reviews the theoretical and experimental literature regarding the fundamental aspects of flames in nonvolatile solid fuel suspensions. It summarizes the key experimental evidence of laminar flame structure and flame speed from a variety of experimental apparatus, and interprets these results in terms of relatively simple theoretical models. The paper emphasizes the importance of diffusion-limited reactions in the ignition and combustion of particles in nonvolatile suspensions.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2022)

添加到收藏夹

Article Energy & Fuels

Micro-Explosion mechanism of iron hybrid Methane-Air premixed flames

Yueh-Heng Li et al.

Summary: This study investigates the micro-explosion mechanisms of iron particles in methane-air premixed flames. The experiment shows that the micro-explosion probability of iron particles increases with the particle size and CO plays a critical role in promoting the micro-explosion probability of particles smaller than 50μm. The mechanism of micro-explosion involves oxidizer diffusion, iron oxide production, and the redox reaction of Fe3O4 with CO.

FUEL (2022)

添加到收藏夹

Review Chemistry, Physical

Low-carbon production of iron and steel: Technology options, economic assessment, and policy

Zhiyuan Fan et al.

Summary: With the urgency to transition to a net-zero CO2 economy, governments and industries are focusing on decarbonizing hard-to-abate sectors like steel making. Current decarbonization technologies have limitations, and achieving deep decarbonization in the iron and steel industry will require a combination of factors including cost and technical maturity.

JOULE (2021)

添加到收藏夹

Article Thermodynamics

Burn time and combustion regime of laser-ignited single iron particle

D. Ning et al.

Summary: An improved particle generator based on electrodynamic powder fluidization was proposed and constructed for investigating the combustion of a single metal particle. Experimental results showed that the combustion process of particles is influenced by oxygen concentration, and the overall combustion process of iron particles is controlled by external and internal diffusion of oxygen.

COMBUSTION AND FLAME (2021)

添加到收藏夹

Article Optics

Stereoscopic high-speed imaging of iron microexplosions and nanoparticle-release

Shen Li et al.

Summary: The combustion behavior of iron particles in a laminar diffusion flame was studied, revealing the importance of microexplosive processes. It was observed that microexplosions can impact combustion stability, product formation and result in the generation of planar structures. The release phenomenon during iron particle combustion was characterized by multiple cracked particle shells and hollow structures, with FeO identified as an intermediate species.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Engineering, Chemical

Mechanism of surface morphology evolution in the reduction of fine iron ore in a conical fluidized bed reactor

Xu Zhang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen

Abhinav Bhaskar et al.

ENERGIES (2020)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A Review on Prevention of Sticking during Fluidized Bed Reduction of Fine Iron Ore

Lei Guo et al.

ISIJ INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Chemical

Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction

Daniel Spreitzer et al.

PARTICUOLOGY (2020)

添加到收藏夹

Article Engineering, Chemical

Combustion behavior of pulverized sponge iron as a recyclable electrofuel

Pal Toth et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Sticking behaviour and mechanism of iron ore pellets in COREX pre-reduction shaft furnace

Zhan-xia Di et al.

IRONMAKING & STEELMAKING (2019)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Reduction of Iron Oxides with Hydrogen-A Review

Daniel Spreitzer et al.

STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Chemical

Microstructural characterization and gas-solid reduction kinetics of iron ore fines at high temperature

Yingxia Qu et al.

POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Chemical

Self-agglomeration mechanism of iron nanoparticles in a fluidized bed

Jun Li et al.

CHEMICAL ENGINEERING SCIENCE (2018)

添加到收藏夹

Article Thermodynamics

Combustion of particles, agglomerates, and suspensions - A basic thermophysical analysis

Michael Soo et al.

COMBUSTION AND FLAME (2018)

添加到收藏夹

Article Energy & Fuels

Pulverized Sponge Iron, a Zero-Carbon and Clean Substitute for Fossil Coal in Energy Applications

Henrik Wiinikka et al.

ENERGY & FUELS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Assessment of hydrogen direct reduction for fossil-free steelmaking

Valentin Vogl et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Dense energy carrier assessment of four combustible metal powders

Luc Dirven et al.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of Reduction Condition on the Morphology of Newly Formed Metallic Iron During the Fluidized Bed Reduction of Fine Iron Ores and its Corresponding Agglomeration Behavior

Zhan Du et al.

STEEL RESEARCH INTERNATIONAL (2016)

添加到收藏夹

Article Energy & Fuels

Direct combustion of recyclable metal fuels for zero-carbon heat and power

J. M. Bergthorson et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Reduction Kinetics of Fine Hematite Ore Particles with a High Temperature Drop Tube Furnace

Yingxia Qu et al.

ISIJ INTERNATIONAL (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Thermal surface free energy and stress of iron

Stephan Schonecker et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Engineering, Chemical

Experimental and theoretical study on the fluidization behaviors of iron powder at high temperature

Chao Lei et al.

CHEMICAL ENGINEERING SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Insight of Iron Whisker Sticking Mechanism from Iron Atom Diffusion and Calculation of Solid Bridge Radius

Xuzhong Gong et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Direct reduction of hematite powders in a fluidized bed reactor

Qingshan Zhu et al.

PARTICUOLOGY (2013)

添加到收藏夹

Article Engineering, Chemical

Sticking of iron ore pellets during reduction with hydrogen and carbon monoxide mixtures: Behavior and mechanism

Lingyun Yi et al.

POWDER TECHNOLOGY (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Reducing Gas on Swelling and Iron Whisker Formation during the Reduction of Iron Oxide Compact

Haitao Wang et al.

STEEL RESEARCH INTERNATIONAL (2012)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Influence of Temperature on Sticking Behavior of Iron Powder in Fluidized Bed

Jian-Hua Shao et al.

ISIJ INTERNATIONAL (2011)

添加到收藏夹

Article Engineering, Chemical

Recent status of fluidized bed technologies for producing iron input materials for steelmaking

Johannes Leopold Schenk

PARTICUOLOGY (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Nanophase Transition Metal Oxides Show Large Thermodynamically Driven Shifts in Oxidation-Reduction Equilibria

Alexandra Navrotsky et al.

SCIENCE (2010)

添加到收藏夹

Article Chemistry, Physical

A review of the sponge iron process for the storage and transmission of remotely generated marine energy

Dimitri Mignard et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

添加到收藏夹

Article Engineering, Chemical

Modelling of sintering of iron particles in high-temperature gas fluidisation

PC Knight et al.

CHEMICAL ENGINEERING SCIENCE (2000)

添加到收藏夹

Article Engineering, Chemical

Numerical simulation of metallic solid bridging particles in a fluidized bed at high temperature

K Kuwagi et al.

POWDER TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.