4.2 Article

Removal of Congo Red from Wastewater Using ZnO/MgO Nanocomposites as Adsorbents: Equilibrium Isotherm Analyses, Kinetics and Thermodynamic Studies

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Construction of CeO2/YMnO3 and CeO2/MgAl2O4/YMnO3 photocatalysts and adsorption of dyes and photocatalytic oxidation of antibiotics: Performance prediction, degradation pathway and mechanism insight br

Shifa Wang et al.

Summary: A simple two-step method was developed to fabricate ternary heterojunctions of YMnO3/CeO2/MgAl2O4 composite photocatalysts, which exhibited good adsorption capacity and photocatalytic activity. The GA model showed the best predictive ability for the adsorption capacity. The YCM photocatalysts displayed high optical absorption coefficient, charge carrier transfer and separation efficiency, adsorbed oxygen concentration and interface defect, high adsorption capacity, and photocatalytic activity. This study demonstrated the huge potential of YCM composite photocatalysts for eco-friendly adsorption of dye and degradation of drugs.

APPLIED SURFACE SCIENCE (2023)

Article Chemistry, Physical

CTAB-assisted synthesis of Bi2MoO6 hierarchical microsphere and its application as a novel efficient and recyclable adsorbent in removing organic pollutants

Chaoli Chen et al.

Summary: Hierarchical microspheres of Bi2MoO6 (BMO) were synthesized using a solvothermal method with CTAB as surfactant. The synthesized BMO showed efficient and recyclable adsorption of organic pollutants, as demonstrated by investigating the adsorption kinetics, isotherms, and thermodynamics of methylene blue (MB) onto the BMO adsorbent. The BMO adsorbent can be easily regenerated via calcination in air and exhibits excellent reusability. Further studies showed its adsorption capability in removing various organic pollutants at different pH environments.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2023)

Article Chemistry, Physical

Preparation of core-shell heterojunction photocatalysts by coating CdS nanoparticles onto Bi4Ti3O12 hierarchical microspheres and their photocatalytic removal of organic pollutants and Cr(VI) ions

Tingting Cheng et al.

Summary: Researchers successfully constructed core-shell BTO/CdS heterojunction photocatalysts, which exhibit excellent photocatalytic activity in degrading dyes and harmful ions. The enhanced photocatalytic mechanism of BTO/CdS heterojunction photocatalysts was discussed based on a Z-scheme carrier transfer process.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Engineering, Chemical

Highly piezocatalysis of metal-organic frameworks material ZIF-8 under vibration

Lujie Ruan et al.

Summary: Research shows that metal-organic frameworks ZIF-8 nanoparticles synthesized via the liquid phase method exhibit outstanding piezocatalytic performance on Rhodamine B dye degradation under vibration, with potential application in dye wastewater treatment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

A simple polyacrylamide gel route for the synthesis of MgAl2O4 nanoparticles with different metal sources as an efficient adsorbent: Neural network algorithm simulation, equilibrium, kinetics and thermodynamic studies

Hao Liu et al.

Summary: The study used a polyacrylamide gel method to prepare MgAl2O4 nanoparticles with different particle sizes for the removal of dyes from wastewater. A neural network prediction model was established to predict the effect of synthesis parameters on the phase purity of MgAl2O4. The adsorption experiments showed different adsorption performances of MgAl2O4 nanoparticles for Congo red, acid orange 7 and acid fuchsin under various experimental conditions.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Review Engineering, Chemical

Recent advances in applications of low-cost adsorbents for the removal of heavy metals from water: A critical review

Muhammad Bilal et al.

Summary: This review critically evaluates the modern developments in applications of bio-sorbents in water purification with an emphasis on adsorption. It describes in detail the heavy metals adsorption onto different bio-waste derived adsorbents, including the adsorption mechanism and their regeneration abilities. Major challenges, hurdles, and opportunities are discussed, along with a roadmap and future research recommendations to ensure the effective applications of bio-sorbents in water purification systems.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Nickel-Based Selenides with a Fractal Structure as an Excellent Bifunctional Electrocatalyst for Water Splitting

Jingxuan He et al.

Summary: In this study, nickel-based selenides with different fractal structures were prepared by controlling aging time, and the catalytic activity was studied. By doping iron in NixSey, the catalytic activity was successfully improved. This has important reference value for the development of low-cost and high-efficiency electrocatalytic water splitting catalysts.

NANOMATERIALS (2022)

Article Engineering, Chemical

Efficient adsorption of methylene blue from aqueous solution by hydrothermal chemical modification phosphorus ore flotation tailings

Weile Meng et al.

Summary: In this study, modified phosphorus ore flotation tailings (MPOFTs) were synthesized as an efficient adsorbent to remove MB, showing a high adsorption capacity under specific conditions. The research provides a new method for the resource utilization of phosphorus ore flotation tailings.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Defect engineering in novel broad-band gap hexaaluminate MAl12O19 (M=Ca, sr, Ba)-Based photocatalysts Boosts Near ultraviolet and visible light-driven photocatalytic performance

S. Wang et al.

Summary: The M(M = Ca, Sr, Ba)Al12O19, MAl12O19:Mn, and MAl12O19:Mn:Ce photocatalysts were successfully synthesized via a polyacrylamide gel method. The Mn3O4 and CeO2 particles were immobilized on the surface of MAl12O19 nanosheets, leading to enhanced photocatalytic activity for the degradation of methylene blue under near ultraviolet and visible light irradiation.

MATERIALS TODAY CHEMISTRY (2022)

Article Chemistry, Physical

Comparative investigation on synthesis, morphological tailoring and photocatalytic activities of Bi2O2CO3 nanostructures

Liexiao Li et al.

Summary: This study focuses on synthesizing various Bi(2)O(2)CO(3) nanostructures and comparing their photocatalytic activities. The nanoparticles show the highest photodegradation activity for MB, while the hierarchical nanotubes exhibit the highest photoreduction activity for Cr(VI) ions.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Nanoscience & Nanotechnology

Spinel CuB2O4 (B = Fe, Cr, and Al) Oxides for Selective Adsorption of Congo Red and Photocatalytic Removal of Antibiotics

Mengjun Han et al.

Summary: A polyacrylamide gel method was used to synthesize nano-CuB2O4 with different phase structures. CuAl2O4 oxide showed superior properties, including smaller particle size, high adsorption capacity, and high photocatalytic activity.

ACS APPLIED NANO MATERIALS (2022)

Article Engineering, Chemical

Skillfully grafted C-O functional group to enhance the adsorption/photocatalytic mechanism of YMnO3/MgAl2O4 heterojunction photocatalysts

Shifa Wang et al.

Summary: YMnO3 with different manganese salts were synthesized, and the effects of manganese salts on the structure and properties of YMnO3 were studied. Pure YMnO3 with uniform particles was obtained using C4H6MnO4·4H2O as the manganese source. The YMnO3/MgAl2O4 photocatalyst with 10% MgAl2O4 exhibited high optical absorption coefficient and degradation efficiency for various pollutants. Hydroxyl and superoxide radicals played a dominant role in the photocatalytic degradation process. This study explores the potential application of YMO/MAO as adsorption/degradation catalysts for dyes, antibiotics, and persistent organic pollutants, providing technical reference for the synthesis of other heterojunction photocatalysts.

ADVANCED POWDER TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Heteroatoms Induce Localization of the Electric Field and Promote a Wide Potential-Window Selectivity Towards CO in the CO2 Electroreduction

Chao Cai et al.

Summary: This study demonstrates that the electric field generated by Sn heteroatoms on the Ag/Sn catalyst enhances the adsorption of *COOH, favoring the production of CO during CO2RR process.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Materials Science, Ceramics

A novel lead hexagonal ferrite (PbFe12O19) magnetic separation catalyst with excellent ultrasonic catalytic activity

Xiangyu Chen et al.

Summary: Novel PbFe12O19 magnetic separation catalysts (PFOMSCs) with high specific activity were synthesized, and they have the potential for the removal of RhB dye from wastewater.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2022)

Article Chemistry, Inorganic & Nuclear

M-type Barium Hexaferrite Nanoparticles Synthesized by γ-Ray Irradiation Assisted Polyacrylamide Gel Method and Its Optical, Magnetic and Supercapacitive Performances

Shifa Wang et al.

Summary: The experiment parameters and thermal decomposition behavior of Barium hexaferrites nanoparticles prepared using RIAPGM were investigated. The structure, optical, magnetic and electrochemical properties of the nanoparticles were examined using various characterization techniques, with emphasis on optical and magnetic properties at different annealing temperatures. The nanoparticles showed uniform particle size distribution and excellent magnetic and electrochemical properties due to facet-dependent behavior.

JOURNAL OF CLUSTER SCIENCE (2021)

Article Engineering, Chemical

Elaboration and properties of a new SDS/CTAB@Montmorillonite organoclay composite as a superb adsorbent for the removal of malachite green from aqueous solutions

Redouane Haounati et al.

Summary: The SDS/CTAB@Mt composite, prepared through the synergistic effect of CTAB and SDS, showed a highly negatively charged surface and good adsorption properties for malachite green. The adsorption process followed the Langmuir model and pseudo-second-order kinetics, with a maximum adsorbed amount of 1021.45 mg/g. Thermodynamic parameters indicated that the adsorption of malachite green onto the composite was spontaneous, exothermic, and led to a decrease in randomness of adsorbed molecules.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Physical

Flexoelectricity-induced enhancement in carrier separation and photocatalytic activity of a photocatalyst

Tingting Cheng et al.

Summary: This study demonstrates the flexoelectricity-enhanced mechanism of photocatalysis in Ag2MoO4, and further explores its potential application in environmental pollution degradation.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Ceramics

Antibacterial property improvement of nano-MgO prepared by lithium doping under nitrogen calcination

Xiaoyi Li et al.

Summary: In this study, modified nano-MgO with enhanced antibacterial activity was successfully fabricated through lithium ion doping and calcination in a nitrogen atmosphere. The modified nano-MgO showed superior antibacterial properties and durability, making it a promising MgO-based antibacterial agent.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Polyacrylamide gel synthesis and photocatalytic performance of CuCo2O4 nanoparticles

Zuming He et al.

Summary: The phase-pure and well-dispersed CuCo2O4 nanoparticles were successfully designed and fabricated using a simple and inexpensive polyacrylamide gel method. The nanoparticles showed superior photocatalytic activity and stability in degrading oxytetracycline hydrochloride under visible illumination, with hydroxyl radicals and holes playing a major role in the degradation process. A possible photocatalytic mechanism was discussed based on the analysis of experimental results.

MATERIALS LETTERS (2021)

Article Chemistry, Multidisciplinary

Comparative study of the photoluminescence performance and photocatalytic activity of CeO2/MgAl2O4 composite materials with an n-n heterojunction prepared by one-step synthesis and two-step synthesis methods

Shifa Wang et al.

Summary: CeO2/MgAl2O4 composite materials with an n-n heterojunction were synthesized by one-step and two-step methods, and the properties were compared. The one-step synthesis showed good photoluminescence properties, while the two-step synthesis exhibited high photocatalytic activity for dye degradation. The synergistic effects of phase purity, specific surface area, light absorption capacity, and charge transfer efficiency contributed to the enhanced photocatalytic performance.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Article Engineering, Chemical

A magnetically recyclable polyampholyte hydrogel adsorbent functionalized with β-cyclodextrin and graphene oxide for cationic/anionic dyes and heavy metal ion wastewater remediation

Jiahe Yan et al.

Summary: A multifunctional, stable, and recyclable adsorbent for treating contaminants with charge diversity in wastewater was successfully prepared through simple one-pot polymerization and ammonolysis, showing excellent adsorption performance and recyclability.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Nafion membranes modified by cationic cyclodextrin derivatives for enantioselective separation

Jana Gaalova et al.

Summary: Nafion117 (R) membranes modified by cationic cyclodextrin derivatives were prepared by strong ionic bonding for enantioselective separation. The CD-DEG-MIM2 membrane showed the highest enantiomeric excess. Pertraction played a crucial role in enhancing the separation of racemic mixtures, suggesting potential for continuous large-scale production of enantiopure compounds.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Thermocatalytic persulfate activation for metronidazole removal in the continuous operation

Mojtaba Forouzesh et al.

Summary: The study found that alkaline media promoted the removal of MTZ during thermocatalytic oxidation, indicating the effectiveness of PS activation in degrading MTZ. Under optimal conditions, over 95% of MTZ was degraded, with sulfate and hydroxyl radicals playing a major role in the degradation process, and low copper leaching observed.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Accelerated photocatalytic degradation of tetracycline hydrochloride over CuAl2O4/g-C3N4 p-n heterojunctions under visible light irradiation

Wei Chen et al.

Summary: In this study, CuAl2O4/g-C3N4 p-n heterojunctions were synthesized through self-assembly, with the 10 wt% CuAl2O4/g-C3N4 showing the highest catalytic activity and structural stability for the photodegradation of tetracycline hydrochloride. The photocatalytic degradation mainly proceeds via superoxide radicals and photogenerated holes in these p-n heterojunctions.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Materials Science, Ceramics

Structural, optical, cytotoxicity, and antimicrobial properties of MgO, ZnO and MgO/ZnO nanocomposite for biomedical applications

Abhishek Nigam et al.

Summary: In this study, MgO/ZnO nanocomposites with good crystallinity and dispersity were successfully prepared, showing excellent biocompatibility and antimicrobial properties against human cells and bacteria such as Escherichia coli and Staphylococcus aureus.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

High sintering activity NaNbO3 powder synthesis via the polyacrylamide gel method and fabrication of a NaNbO3 ceramic at lower temperature

Fen Ye et al.

Summary: NaNbO3 powder was synthesized using the polyacrylamide gel method, and after calcination at 565 degrees C, it exhibited dense ceramic sintering activity at a lower temperature. The morphology and composition of NaNbO3 powder changed with increasing calcination temperature, resulting in the formation of highly sinterable cubic NaNbO3 ceramic.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Engineering, Electrical & Electronic

Modified polyacrylamide gel synthesis of CeO2 nanoparticles by using cerium sulfate as metal source and its optical and photoluminescence properties

Shifa Wang et al.

Summary: Developing a novel method to synthesize highly dispersed nanosemiconductor materials is a major challenge in expanding the application field of luminescent materials. The study showed that the content of acrylamide and methylene diacrylamide significantly affects the properties of CeO2 nanoparticles synthesized using a modified polyacrylamide gel method.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Chemistry, Multidisciplinary

Nanostructured spinel-type M(M = Mg, Co, Zn)Cr2O4 oxides: novel adsorbents for aqueous Congo red removal

H. J. Gao et al.

Summary: Nanostructured spinel-type M(M = Mg, Co, Zn)Cr2O4 oxides with novel adsorbents showed excellent adsorption performance for aqueous Congo red removal. Among them, ZnCr2O4 oxide exhibited higher adsorption capacity than MgCr2O4 and CoCr2O4 oxides. The adsorption process was best described by pseudo-second-order kinetics.

MATERIALS TODAY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Hierarchically structured β-Ni(OH)2 clusters: a uniquely efficient aqueous phase pollutant adsorbent for multiple anionic dyes and heavy metal ions

M. K. Paliwal et al.

Summary: Mesostructured 3D self-assembled beta-Ni(OH)(2) clusters were synthesized for the first time with high surface area, large pore size, and uniform flower-like morphology using a novel microwave heating method. These clusters exhibited excellent adsorption capacity for various anionic dyes and heavy metal ions, with adsorption occurring through chemisorption and intraparticle diffusion processes. The superior adsorption efficiency was attributed to the unique surface characteristics and pore architecture of the beta-Ni(OH)(2) clusters.

MATERIALS TODAY CHEMISTRY (2021)

Article Environmental Sciences

Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism

Nishesh Kumar Gupta et al.

Summary: Zn-MOF/ZnO nanocomposites with different organic linkers were successfully prepared and showed excellent H2S adsorption performance. Regeneration using methanol and UV irradiation significantly improved the regeneration rate of the adsorbents. Spectroscopic and XPS analysis confirmed the chemisorption mechanism of H2S on Zn-MOF/ZnO.

CHEMOSPHERE (2021)

Article Energy & Fuels

Construction of multifunctional dual Z-scheme composites with enhanced photocatalytic activities for degradation of ciprofloxacin

Zuming He et al.

Summary: Visible-light-driven photocatalysis using magnetic recyclable dual Z-scheme NiFe2O4/Bi2WO6/AgI composites showed excellent photocatalytic performance for the degradation of ciprofloxacin compared to individual components. The 75%NiFe2O4/Bi2WO6/AgI composite exhibited the highest photocatalytic efficiency due to enhanced light absorption and dual Z-scheme transmission paths, suggesting its potential application in antibiotic wastewater treatment.
Article Engineering, Environmental

Optimization of Sibipiruna activated carbon preparation by simplex-centroid mixture design for simultaneous adsorption of rhodamine B and metformin

Lucas Spessato et al.

Summary: By utilizing augmented simplex-centroid mixture design, a high BET surface area activated carbon was successfully prepared, with K2CO3 found to catalyze pore development in the presence of KOH, increasing the surface area. The activated carbon exhibited a complex pore structure and showed high adsorption capacities for both rhodamine B and metformin.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Materials Science, Ceramics

Polyacrylamide gel synthesis, characterization, and optical properties of Co1-xNixCr2O4 spinel nanopigment

Mehdi Ahmadyari-Sharamin et al.

Summary: In this study, Co1-xNixCr2O4 spinel nanopigment was synthesized using the polyacrylamide gel method, and the effects of nickel substitution on the morphology, crystal structure, and optical properties of the pigment were investigated. The results showed that increasing nickel content led to a change in the absorption spectrum and increased brightness of the pigment, with more green and yellow tendencies.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Microstructure, optical, photoluminescence properties and the intrinsic mechanism of photoluminescence and photocatalysis for the BaTiO3, BaTiO3/TiO2 and BaTiO3/TiO2/CeO2 smart composites

Shifa Wang et al.

Summary: The BaTiO3/TiO2/CeO2 smart composites were synthesized by hydrothermal method, exhibiting distinct optical properties and photocatalytic activities. The inclusion of CeO2 in the composites significantly impacted the photoluminescence and photocatalytic performance, with the BaTiO3/(15 wt%) TiO2/(15 wt%) CeO2 smart composites demonstrating the highest photocatalytic activity for methylene blue degradation under UV light.

OPTICAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

A Comparative Study on the Phase Structure, Optical and NIR Reflectivity of BaFe12O19 Nano-Pigments by the Traditional and Modified Polyacrylamide Gel Method

Shifa Wang et al.

Summary: BaFe12O19 nano-pigments have a high near infrared reflection in the wavelength range of 1400-2500 nm, and can be synthesized through an improved method to achieve efficient near infrared reflection, with potential applications in heat shielding.

JOURNAL OF NANO RESEARCH (2021)

Article Chemistry, Multidisciplinary

Facile preparation of MgAl2O4/CeO2/Mn3O4 heterojunction photocatalyst and enhanced photocatalytic activity

J. Li et al.

Summary: The novel Mn3O4-promoted double p-n junction MgAl2O4/CeO2/Mn3O4 heterojunction photocatalyst, synthesized using a two-step method, demonstrated high crystallinity and efficient photocatalytic activity. This catalyst showed effective degradation of methylene blue dye under simulated sunlight, making it a promising candidate for enhancing photocatalytic activity.

MATERIALS TODAY CHEMISTRY (2021)

Article Engineering, Environmental

Innovative spherical biochar for pharmaceutical removal from water: Insight into adsorption mechanism

Hai Nguyen Tran et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Chemistry, Physical

Synthesis of superparamagnetic activated carbon for paracetamol removal from aqueous solution

Lucas Spessato et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Engineering, Electrical & Electronic

FTIR, UV-Vis-NIR spectroscopy, and gamma rays shielding competence of novel ZnO-doped vanadium borophosphate glasses

Y. S. Rammah et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Nanoscience & Nanotechnology

Fabrication and photocatalytic performance of Bi24O31Br10 nanosphere by a polyacrylamide gel method

Zuming He et al.

MICRO & NANO LETTERS (2020)

Article Chemistry, Physical

Methyl orange adsorption from aqueous solutions on 3D hierarchical PbS/ZnO microspheres

Sitong Liu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Engineering, Electrical & Electronic

Effect of Zn2+ions on structural, optical, magnetic, and impedance response of Znx@Ni1-xFe2O4core materials prepared by two-step polyacrylamide gel method

R. Sankaranarayanan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Engineering, Environmental

Electrocoagulation of Congo Red dye-containing wastewater: Optimization of operational parameters and process mechanism

Adnan Akhtar et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Engineering, Environmental

In-situ prepared ZnO-ZnFe2O4 with 1-D nanofiber network structure: An effective adsorbent for toxic dye effluent treatment

Richard Appiah-Ntiamoah et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Nanoscience & Nanotechnology

Effect of excess Ca2+ on the formation of CaZrO3 powders via polyacrylamide gel method

Kuo Huang et al.

MATERIALS EXPRESS (2019)

Article Green & Sustainable Science & Technology

Kinetics, thermodynamics, isotherm and regeneration analysis of chitosan modified pandan adsorbent

Fatin Amirah Razmi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Chemistry, Physical

Influence of Mg doping on ZnO NPs for enhanced adsorption activity of Congo Red dye

P. P. Rath et al.

APPLIED SURFACE SCIENCE (2019)

Article Materials Science, Multidisciplinary

Influence of fuel nature on dye adsorption efficiency of solution combustion derived zinc oxide nanoparticles: A comparative study

T. P. Krishna Murthy et al.

MATERIALS RESEARCH EXPRESS (2019)

Article Chemistry, Multidisciplinary

The preparation of MgO nanopowders synthesized via an improved polyacrylamide gel method

Xiaojun Zhao et al.

RSC ADVANCES (2019)

Article Chemistry, Physical

Preparation and flash sintering of MgTiO3 nanopowders obtained by the polyacrylamide gel method

Xinghua Su et al.

APPLIED SURFACE SCIENCE (2018)

Article Chemistry, Physical

Adsorption of Congo red from aqueous solution using ZnO-modified SiO2 nanospheres with rough surfaces

Jiajin Zhang et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Article Chemistry, Physical

Enhanced solar light photocatalytic properties of ZnO nanocrystals by Mg-doping via polyacrylamide polymer method

X. X. Yu et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2018)

Article Engineering, Electrical & Electronic

Microwave assisted CdO-ZnO-MgO nanocomposite and its photocatalytic and antibacterial studies

V. Revathi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Engineering, Chemical

Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions

K. L. Tan et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Article Engineering, Electrical & Electronic

Characteristics and optical properties of MgO nanowires synthesized by solvothermal method

N. M. A. Hadia et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)

Article Nanoscience & Nanotechnology

Magnetic Nanocomposites Through Polyacrylamide Gel Route

S. F. Wang et al.

NANOSCIENCE AND NANOTECHNOLOGY LETTERS (2014)

Article Materials Science, Ceramics

Polyacrylamide gel synthesis and sintering of Mg2SiO4:Eu3+ nanopowder

S. A. Hassanzadeh-Tabrizi et al.

CERAMICS INTERNATIONAL (2013)

Article Crystallography

Structure and optical properties of Mg-doped ZnO nanoparticles by polyacrylamide method

Yan Wu et al.

CRYSTAL RESEARCH AND TECHNOLOGY (2013)

Article Chemistry, Physical

Adsorption of Reactive Blue 4 dye from water solutions by carbon nanotubes: experiment and theory

Fernando M. Machado et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

Article Nuclear Science & Technology

Filament Temperature Dependence of the Nano-size MgO Particles Prepared by the HWCVD Technique

Seyed Majid Borghei et al.

JOURNAL OF FUSION ENERGY (2011)

Article Chemistry, Applied

Promoted dye adsorption performance over desilicated natural zeolite

Murat Akgul et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2011)

Article Chemistry, Physical

Adsorptive removal of congo red dye from aqueous solution using bael shell carbon

Rais Ahmad et al.

APPLIED SURFACE SCIENCE (2010)

Article Engineering, Environmental

Role of morphology in the aggregation kinetics of ZnO nanoparticles

Dongxu Zhou et al.

WATER RESEARCH (2010)

Article Materials Science, Ceramics

Synthesis, characterization and optical properties of Mg(OH)2 micro-/nanostructure and its conversion to MgO

Latha Kumari et al.

CERAMICS INTERNATIONAL (2009)

Article Engineering, Environmental

Evaluation of papaya seeds as a novel non-conventional low-cost adsorbent for removal of methylene blue

B. H. Hameed

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Engineering, Industrial

Fabrication of nanometer-sized zinc oxide at low decomposing temperature

Z. B. Shao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)