☆ 4.7 Article

High-Sensitivity Transverse-Load and Axial-Strain Sensor Based on Air-Bubble Fabry-Perot Cavity and Fiber Sagnac Loop Cascaded

IEEE SENSORS JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Optics

Simultaneous measurement of strain and temperature based on fiber sensor with Vernier effect

Li Zhao et al.

Summary: A fiber sensor based on Vernier effect is proposed for simultaneous temperature and strain measurement. The sensor consists of a Mach-Zehnder interferometer and a Fabry-Perot interferometer. By utilizing the different response of the two interferometers, the sensor achieved simultaneous measurement of temperature and strain.

OPTICS AND LASER TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

Temperature-Compensated High-Sensitivity Relative Humidity Sensor Based on Band-Pass Filtering and Vernier Effect

Changgui Yu et al.

Summary: A temperature-compensated high-sensitivity relative humidity (RH) sensor based on bandpass filtering and Vernier effect is proposed. The sensor utilizes the Vernier effect to improve RH sensitivity and employs bandpass filtering to separate the spectrum of the sensing cavity, solving the problem of temperature disturbance with a sensitivity coefficient matrix.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

High sensitivity relative humidity sensor based on two parallel-connected Fabry-Perot interferometers and Vernier effect

Yuan Wang et al.

Summary: In this study, a highly sensitive relative humidity sensor based on two Fabry-Perot interferometers in parallel with the Vernier effect was designed and demonstrated. The sensor showed improved sensitivity due to the Vernier effect. Experimental results showed that the RH sensitivity of the sensor is up to -586.6 pm/% RH, which is 17.3 times that of a single FPI sensor without the Vernier effect. The sensor also possessed the advantages of simple manufacturing, robust structure, and stable operation.

OPTICAL FIBER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

High-sensitivity fiber-optic Fabry-Perot transverse load sensor based on bubble microcavity

Xiaoli Zhang et al.

Summary: This article presents a miniature fiber optic transverse load sensor based on a bubble microcavity. It features small size, low cost, easy fabrication, high sensitivity, and low temperature sensitivity, making it highly promising for transverse load sensing.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

In-fiber Fabry-Perot temperature sensor using silicone-oil-filled the quartz capillary tube

Xiping Zhu et al.

Summary: A highly sensitive temperature sensor based on a Fabry-Perot interferometer (FPI) filled with silicone oil was designed and demonstrated. The sensor has the advantages of simple manufacturing, good robustness, and stability. The high thermo-optical coefficient of the silicone oil results in a significant wavelength shift of the reflection spectrum, providing the sensor with high sensitivity. The temperature sensitivity of the sensor reaches -0.4102 nm/℃, which is about 205.1 times higher than that of the unfilled sensor. The compact size of the sensor head allows for flexible use in limited space and harsh environments.

OPTICAL FIBER TECHNOLOGY (2022)

添加到收藏夹

Article Optics

Microbubble-based optical fiber Fabry-Perot sensor for simultaneous high-pressure and high-temperature sensing

Yong Hu et al.

Summary: An all-silica Fabry-Perot interferometer (FPI) based on a microbubble is proposed for high-pressure and high-temperature measurements. The microbubble-based air cavity is fabricated using a hollow silica tube and a single-mode optical fiber for pressure sensing. The sensor exhibits linear wavelength shift versus pressure and high temperature sensitivity, making it suitable for simultaneous high-pressure and high-temperature measurements in harsh environments.

OPTICS EXPRESS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Fiber-optic sensors based on Vernier effect

Yingxuan Liu et al.

Summary: Fiber-optic sensors have rapidly developed due to their excellent sensing performances, but in special occasions with high requirements for sensitivity and resolution, traditional sensing mechanisms may fall short. This review discusses the Vernier effect as a sensitization method in fiber-optic sensors, covering working principles, mechanisms, structures, research progress, applications, and future development directions.

MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

High sensitivity gas pressure sensor based on two parallel-connected Fabry-Perot interferometers and Vernier effect

Xiaoshan Guo et al.

Summary: This study designed and demonstrated a highly sensitive gas pressure sensor based on the Vernier effect by parallel connection of two FPIs. The sensitivity of the sensor was significantly improved, with advantages of simple manufacturing and stable operation.

MEASUREMENT SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Simultaneous transverse load, refractive index, and high-temperature sensor based on michelson interferometer

Jiewen Zheng et al.

Summary: The all-fiber sensor proposed in this study utilizes single-mode fiber and simple fusion technology for simultaneous measurement of transverse load, refractive index, and high temperature. With advantages of small volume, easy manufacture, low cost, high reliability, and good mechanical strength, it is suitable for applications in oil exploitation and structural health monitoring.

OPTICAL FIBER TECHNOLOGY (2021)

添加到收藏夹

Article Optics

High sensitivity temperature sensor based on a PDMS-assisted bow-shaped fiber structure

Hongxia Wang et al.

Summary: A bow-shaped fiber structure (BFS) was fabricated using a simple knotting method, with adjustable extinction ratio for application in strain or displacement sensors. The temperature sensing performance was greatly enhanced by embedding the microfiber region in a PDMS layer, showing promising potential for future applications.

OPTICS COMMUNICATIONS (2021)

添加到收藏夹

Article Optics

Temperature-insensitive directional transverse load sensor based on dual side-hole fiber Bragg grating

Jun He et al.

Summary: A temperature-insensitive directional transverse load sensor based on dual side-hole fiber and fiber Bragg grating was proposed and demonstrated, showing high sensitivity and directional response for transverse load monitoring. The device also exhibited low sensitivity to temperature changes, making it suitable for intelligent transverse load monitoring applications.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Optics

Ultra-high sensitivity strain sensor based on biconical fiber with a bulge air-bubble

Ben Xu et al.

Summary: An ultra-high sensitivity Fabry-Perot interferometer (FPI) strain sensor with a bulge air-bubble at its waist is proposed and demonstrated in this research. The sensor shows an ultra-high strain sensitivity of 101.7 pm/mu epsilon, which is the highest among direct wavelength interrogation-based strain sensors reported so far. Additionally, it also has a low temperature sensitivity of around 1 pm/degrees C, achieving an extremely low temperature cross sensitivity of less than 10 n epsilon/degrees C.

OPTICS LETTERS (2021)

添加到收藏夹

Article Optics

High-sensitivity transverse-load and high-temperature sensor based on the cascaded Vernier effect

Yang Han et al.

Summary: By utilizing the cascaded Vernier effect, the sensitivity of both transverse-load and temperature sensors can be enhanced, showing great potential in sensing applications.

APPLIED OPTICS (2021)

添加到收藏夹

Review Optics

Optical Vernier Effect: Recent Advances and Developments

Andre D. Gomes et al.

Summary: The optical Vernier effect enhances sensitivity and resolution of fiber sensors by generating magnified sensing capabilities in the output spectrum. This effect relies on the overlap between signals of two slightly detuned interferometers, leading to a new generation of highly sensitive sensing devices.

LASER & PHOTONICS REVIEWS (2021)

添加到收藏夹

Article Optics

Ultra-high-sensitivity refractive index sensor based on dual-microfiber coupler structure with the Vernier effect

Yuxuan Jiang et al.

OPTICS LETTERS (2020)

添加到收藏夹

Article Physics, Applied

Temperature- and strain- insensitive transverse load sensing based on optical fiber reflective Lyot filter

Bo Huang et al.

APPLIED PHYSICS EXPRESS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel fiber Bragg grating (FBG) soil strain sensor

Runzhou You et al.

MEASUREMENT (2019)

添加到收藏夹

Article Optics

Tilted long-period fiber grating strain sensor based on dual-peak resonance near PMTP

Tianqi Guan et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Ultra-Sensitive Strain Sensor Based on Femtosecond Laser Inscribed In-Fiber Reflection Mirrors and Vernier Effect

Jun Deng et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2019)

添加到收藏夹

Article Computer Science, Information Systems

A Transverse Load Sensor With Ultra-Sensitivity Employing Vernier-Effect Improved Parallel-Structured Fiber-Optic Fabry-Perot Interferometer

Yongfeng Wu et al.

IEEE ACCESS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Transverse load sensor based on Mach-Zehnder interferometer constructed by a bowknot type taper

Weimin Lou et al.

OPTICAL FIBER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Ultrasensitive Temperature Sensor With Cascaded Fiber Optic Fabry-Perot Interferometers Based on Vernier Effect

Jin Zhang et al.

IEEE PHOTONICS JOURNAL (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

An interferometric structure with a dual-resonance long period grating for strain sensing

R. Zawisza et al.

OPTO-ELECTRONICS REVIEW (2018)

添加到收藏夹

Article Optics

Temperature and transverse load sensing characteristics of twisted long period fiber gratings fabricated by femtosecond laser

Dongkai Chu et al.

OPTICS AND LASER TECHNOLOGY (2017)

添加到收藏夹

Article Optics

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements

Yongfeng Wu et al.

OPTICS EXPRESS (2017)

添加到收藏夹

Article Chemistry, Analytical

A Micro Bubble Structure Based Fabry-Perot Optical Fiber Strain Sensor with High Sensitivity and Low-Cost Characteristics

Lu Yan et al.

SENSORS (2017)

添加到收藏夹

Article Optics

High-resolution fiber Bragg grating based transverse load sensor using microwave photonics filtering technique

Yiping Wang et al.

OPTICS EXPRESS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Fiber laser sensor for simultaneously axial strain and transverse load detection

Kuanglu Yu et al.

MEASUREMENT (2015)

添加到收藏夹

Article Multidisciplinary Sciences

High-sensitivity strain sensor based on in-fiber rectangular air bubble

Shen Liu et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Discrimination of temperature, strain, and transverse load by using fiber Bragg gratings in a twisted configuration

S. F. O. Silva et al.

IEEE SENSORS JOURNAL (2006)

添加到收藏夹

Article Optics

Simultaneous measurement of axial strain, temperature, and transverse load by a superstructure fiber grating

H Chi et al.

OPTICS LETTERS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.