☆ 4.6 Article

Truss-like Discrete Element Method Applied to Damage Process Simulation in Quasi-Brittle Materials

APPLIED SCIENCES-BASEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Peri dynamic elastic waves in two-dimensional unbounded domains: Construction of nonlocal Dirichlet-type absorbing boundary conditions

Arman Shojaei et al.

Summary: The paper focuses on applying peridynamics (PD) to the propagation of elastic waves in unbounded domains. It introduces absorbing boundary conditions (ABCs) that are derived from a semi-analytical solution of the PD governing equation. The proposed ABCs have Dirichlet-type implementation, are constructed in the time and space domains, and offer advantages in terms of simplicity and compatibility with the near-field solution.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

添加到收藏夹

Article Mathematics, Applied

An efficient peridynamic framework based on the arc-length method for fracture modeling of brittle and quasi-brittle problems with snapping instabilities

Pouria Sheikhbahaei et al.

Summary: This paper presents an implicit peridynamic framework for solving quasi-static problems involving brittle and quasi-brittle fracture. The framework effectively deals with snap-back/snap-through instabilities through two different approaches. It is applicable to both linear elastic and softening material damage models suitable for modeling brittle and quasi-brittle fracture.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2023)

添加到收藏夹

Article Mechanics

A novel LDEM formulation with crack frictional sliding to estimate fracture and flexural behaviour of the shot-earth 772

Angelica Colpo et al.

Summary: In this paper, numerical simulations using the Lattice Discrete Element (LDE) method are conducted to investigate the fracture and flexural behavior of an innovative material called shot-earth 772. A novel constitutive law for the discrete elements is proposed, accounting for damage from material degradation, frictional sliding along rough crack surfaces, and residual strain effects. The comparison between numerical and experimental results shows that the proposed LDE model can accurately simulate the fracture and mechanical behavior of shot-earth 772 up to failure.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of continuum damage and plasticity in concrete: Part II - Numerical framework

George Z. Voyiadjis et al.

Summary: This companion article presents a numerical review of continuum damage mechanics and plasticity in the context of finite element, focusing on local, nonlocal, and rate-dependent models. It discusses numerical algorithms, element types, software used, iterative schemes, and continuity of elements. Finally, open issues in concrete damage modeling and future research directions are also addressed.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of continuum damage and plasticity in concrete: Part I - Theoretical framework

Taehyo Park et al.

Summary: This paper reviews the theoretical and numerical research on concrete modeling, including continuum concrete damage and plasticity modeling, multiscale modeling, and phase-field modeling. It also discusses applications related to rate-dependent models and fatigue in concrete. The review of numerical work is limited to finite element analysis, with open issues and future research directions in concrete damage modeling also being addressed.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

A hybrid meshfree discretization to improve the numerical performance of peridynamic models

Arman Shojaei et al.

Summary: Efficient and accurate calculation of spatial integrals is crucial in the numerical implementation of peridynamics (PD). This paper proposes a new discretization scheme that significantly improves the computational efficiency of PD models. The scheme employs a simple collocation procedure and is truly meshfree, resulting in a smaller set of neighboring nodes required for achieving a specific accuracy. The proposed scheme is applicable to linear PD models and neighborhoods where the solution can be approximated by smooth basis functions. A hybrid discretization combining the standard and proposed schemes within an adaptive framework is also presented. Numerical examples, including brittle fracture and corrosion problems in two and three dimensions, illustrate the high performance of the developed framework.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analysis of Acoustic Emission Activity during Progressive Failure in Heterogeneous Materials: Experimental and Numerical Investigation

Leandro Ferreira Friedrich et al.

Summary: This study focuses on monitoring damage in a concrete specimen under compression through experimental and numerical investigations. The results from the experimental acoustic emission analysis show sensitivity to the characteristics of the measurement apparatuses, while the natural time approach is more robust.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Mechanical

A novel peridynamic approach for fracture analysis of quasi-brittle materials

Leandro F. Friedrich et al.

Summary: This paper introduces a novel peridynamic approach for simulating the fracture behavior of quasibrittle materials. The approach includes an improved bond force-stretch relationship in peridynamic models and the consideration of material energy release rate as a 3D random field. The effectiveness of this approach is verified through case studies on rock, expanded polystyrene, and concrete.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Mechanics

A multiscale peridynamic framework for modelling mechanical properties of polymer-based nanocomposites

Greta Ongaro et al.

Summary: In this study, a peridynamics-based approach was used to estimate the effective tensile modulus of nanomodified epoxy resins, which was then applied to analyze the fracture toughness of nanocomposites. Experimental data confirmed the ability of peridynamics-based methods to accurately model the properties of polymer-based nanocomposites.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

A study by the lattice discrete element method for exploring the fractal nature of scale effects

Luis Eduardo Kosteski et al.

Summary: This article discusses the applications and impacts of damage production on the collapse process of quasi-brittle materials. It also explores the size effect and scaling laws based on fractal concepts. The Discrete Element Method is employed to simulate the mechanical behavior of different size specimens and analyze the size effect. The results demonstrate the robustness of the method in nonlinear analysis of structures built with quasi-brittle materials.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Mechanics

Damage process in glass fiber reinforced polymer specimens using acoustic emission technique with low frequency acquisition

Leandro Friedrich et al.

Summary: This paper investigates the application of acoustic emission technology in fiber-reinforced polymers, explores the effectiveness of different indexes in describing the failure process of structures, proposes a new index c value, and performs experimental validation.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Geological

Assessment of the Lattice Discrete Element Method in the simulation of wave propagation in inhomogeneous linearly elastic geologic materials

Ignacio Iturrioz et al.

Summary: The study of seismic wave propagation in homogeneous and inhomogeneous materials is important in engineering applications, but analytical solutions are increasingly difficult to obtain, requiring numerical approaches.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Damage Evolution Analysis in a Spaghetti Bridge Model Using the Acoustic Emission Technique

Boris Nahuel Rojo Tanzi et al.

Summary: This paper applies the Acoustic Emission (AE) Technique to analyze the damage process in a one-meter span bridge model built from spaghetti sticks during a loading test. The AE signals are evaluated in terms of four coefficients as predictors of structure failure, with frequency variation being the strongest indicator of instability. The AE data are compared to theoretical predictions from the Bundle Model, confirming that general patterns in damage processes are highly influenced by the geometric distribution of the structure and the applied loading pattern.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Construction & Building Technology

Multi-technique damage monitoring of concrete beams: Acoustic Emission, Digital Image Correlation, Dynamic Identification

Giuseppe Lacidogna et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Mechanics

Size effect in heterogeneous materials analyzed through a lattice discrete element method approach

Luis Eduardo Kosteski et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Chemistry, Physical

Criticality Hidden in Acoustic Emissions and in Changing Electrical Resistance during Fracture of Rocks and Cement-Based Materials

Gianni Niccolini et al.

MATERIALS (2020)

添加到收藏夹

Review Engineering, Civil

Computational methods for fracture in rock: a review and recent advances

Ali Jenabidehkordi

FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2019)

添加到收藏夹

Article Mechanics

An alternative bilinear peridynamic model to simulate the damage process in quasi-brittle materials

Nestor Rossi Cabral et al.

ENGINEERING FRACTURE MECHANICS (2019)

添加到收藏夹

Article Engineering, Mechanical

The fracture process in quasi-brittle materials simulated using a lattice dynamical model

Gabriel Birck et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Random field generation of the material properties in the lattice discrete element method

Vicente Bergamini Puglia et al.

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2019)

添加到收藏夹

Article Engineering, Mechanical

Numerical DEM simulation of AE in plate fracture and analogy with the frequency of seismic events in SCRs

Gabriel Birck et al.

ENGINEERING FAILURE ANALYSIS (2018)

添加到收藏夹

Article Mechanics

The influences of mode II loading on fracture process in rock using acoustic emission energy

Qing Lin et al.

ENGINEERING FRACTURE MECHANICS (2018)

添加到收藏夹

Article Physics, Multidisciplinary

Critical features revealed in acoustic and electromagnetic emissions during fracture experiments on LiF

S. M. Potirakis et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2017)

添加到收藏夹

Article Mechanics

Cracking and crackling in concrete-like materials: A dynamic energy balance

A. Carpinteri et al.

ENGINEERING FRACTURE MECHANICS (2016)

添加到收藏夹

Article Engineering, Mechanical

Introduction of imperfections in the cubic mesh of the truss-like discrete element method

I. Iturrioz et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of imperfections in the cubic mesh of the truss-like discrete element method

Jorge Daniel Riera et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)

添加到收藏夹

Article Mechanics

Experimental analysis and truss-like discrete element model simulation of concrete specimens under uniaxial compression

I. Iturrioz et al.

ENGINEERING FRACTURE MECHANICS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crack propagation in elastic solids using the truss-like discrete element method

Luis Kosteski et al.

INTERNATIONAL JOURNAL OF FRACTURE (2012)

添加到收藏夹

Article Mechanics

Elastic behaviour of a regular lattice for meso-scale modelling of solids

Andrey P. Jivkov et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

From criticality to final collapse: Evolution of the b-value from 1.5 to 1.0

Alberto Carpinteri et al.

CHAOS SOLITONS & FRACTALS (2009)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics

Timon Rabczuk et al.

COMPUTATIONAL MECHANICS (2007)

添加到收藏夹

Review Physics, Condensed Matter

Statistical models of fracture

Mikko J. Alava et al.

ADVANCES IN PHYSICS (2006)

添加到收藏夹

Review Geochemistry & Geophysics

Statistical physics approach to understanding the multiscale dynamics of earthquake fault systems

JB Rundle et al.

REVIEWS OF GEOPHYSICS (2003)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment

T Belytschko et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2003)

添加到收藏夹

Article Construction & Building Technology

Assessing damage of reinforced concrete beam using b-value analysis of acoustic emission signals

IS Colombo et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2003)

添加到收藏夹

Article Geochemistry & Geophysics

Micro and macroscopic models of rock fracture

DL Turcotte et al.

GEOPHYSICAL JOURNAL INTERNATIONAL (2003)

添加到收藏夹

Article Biophysics

Anisotropy of fluctuation dynamics of proteins with an elastic network model

AR Atilgan et al.

BIOPHYSICAL JOURNAL (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.