☆ 4.7 Article

Underlayer engineering of grain strain toward efficient and stable tin perovskite solar cells

MATERIALS CHEMISTRY FRONTIERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Highly Efficient Flexible Perovskite Solar Cells through Pentylammonium Acetate Modification with Certified Efficiency of 23.35%

Danpeng Gao et al.

Summary: A highly efficient and stable flexible perovskite solar cell (PSC) is reported by modifying the interface between perovskite and hole transport layer using pentylammonium acetate (PenAAc) molecule. The PenAAc-modified PSC achieves a record power conversion efficiency (PCE) of 23.68% and shows excellent stability under mechanical bending.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Bulk Defect Suppression Strategy in FASnI3 Perovskite for Photovoltaic Performance Enhancement

Bohong Chang et al.

Summary: A novel bulk defect suppression strategy is proposed by introducing large organic piperazine cations into the lattice of 3D FASnI(3) perovskite to restrain the generation of bulk defects, enhancing device performance of Sn-based perovskite solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Sulfonated Graphene Aerogels Enable Safe-to-Use Flexible Perovskite Solar Modules

Zhen Li et al.

Summary: The potential lead leakage from degraded perovskite photovoltaics poses a threat to the ecosystem and human health. By utilizing sulfonated graphene aerogels as lead-absorbing encapsulants, the lead leakage can be reduced to safe levels, facilitating the commercialization of perovskite-based flexible electronics.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

An effective and economical encapsulation method for trapping lead leakage in rigid and flexible perovskite photovoltaics

Zhen Li et al.

Summary: A facile and economical encapsulation process using a mixture of a cationexchange resin and an ultraviolet resin has been developed to effectively capture leaked lead from perovskite solar cells. Over 90% of Pb2+ can be captured by the encapsulant through an efficient reaction under various conditions, reducing lead leaching to < 5 ppm. This strategy provides an effective solution to the toxicity issue of rigid and flexible perovskite PV devices, facilitating their commercialization.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and Stable Tin Perovskite Solar Cells by Pyridine-Functionalized Fullerene with Reduced Interfacial Energy Loss

Bo Li et al.

Summary: A multifunctional interface manipulation strategy is developed to improve the performance and stability of tin perovskite solar cells (PSCs) by introducing a pyridine-functionalized fullerene derivative. The resulting devices achieve the highest power conversion efficiency (PCE) of 14.14% and maintain over 95% of their initial PCE after continuous one-sun illumination for 1000 hours.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced Phase Stability of Compressive Strain-Induced Perovskite Crystals

So-Yeon Ju et al.

Summary: This study introduces the strategy of strain control into perovskite solar cells, showing that applying compressive strain can improve the long-term photovoltaic performance. The compressive strain-induced perovskite film exhibits relatively constant absorbance spectra, while the film without strain control gradually decays and develops an Urbach tail. Furthermore, the device without strain control displays unreliable and overestimated fill factor and conversion efficiency after long-term storage, whereas the compressive strain-induced device shows a stable performance with a 16% increase in fill factor over 911 hours.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Engineering, Environmental

Efficient and stable Cs2AgBiBr6 double perovskite solar cells through in-situ surface modulation

Bo Li et al.

Summary: This study successfully improved the efficiency and stability of double perovskite solar cells by using fused-ring electron acceptor molecules for passivating defects. The modified devices demonstrated significantly increased open-circuit voltage and the highest efficiency achieved to date, along with superior long-term stability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Passivation Strategy on Sn Related Defects for High Performance All-Inorganic CsSnI3 Perovskite Solar Cells

Bo Li et al.

Summary: This study utilized a thioamides passivation strategy to modulate defect state density at surfaces and grain boundaries in CsSnI3 perovskites, achieving high-performance all-inorganic CsSnI3 PSCs. Surface passivation reduced deep level trap state defect density originating from Sn2+ ion and Sn2+ oxidation, restraining nonradiative recombination and elongating carrier lifetime.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Enhanced Performance and Stability of 3D/2D Tin Perovskite Solar Cells Fabricated with a Sequential Solution Deposition

Efat Jokar et al.

Summary: A new sequential deposition method using bulky ammonium cations was developed to form a protective layer for tin perovskite solar cells, resulting in improved stability and self-healing performance. The anilinium (AN) device showed an efficiency of 10.6% and great stability in ambient air without encapsulation, making it a promising alternative to lead-based solar cells.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Applied

Amines modulation and passivation yields record perovskite optoelectronic devices

Wenhuai Feng et al.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Solvents for Processing Stable Tin Halide Perovskites

Diego Di Girolamo et al.

Summary: Tin-based perovskites face stability issues due to oxidation of Sn(II) to Sn(IV), with dimethyl sulfoxide identified as a primary source of tin oxidation. By analyzing over 2000 solvents, a series of 12 new solvents suitable for processing FASnI3 were identified, leading to the production of solar cells outperforming those based on DMSO. This work provides guidance for further research on identifying new solvents for preparing stable tin-based perovskites.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability

Zhenghong Dai et al.

Summary: The use of iodine-terminated self-assembled monolayer (I-SAM) in perovskite solar cells (PSCs) leads to increased adhesion toughness at the interface, improved power conversion efficiency, reduced hysteresis, and enhanced operational stability. This is attributed to a decrease in hydroxyl groups at the interface and higher interfacial toughness achieved with I-SAM treatment.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Acid Dissociation Constant: A Criterion for Selecting Passivation Agents in Perovskite Solar Cells

Sun-Ho Lee et al.

Summary: The acid dissociation constant of passivation agents plays a key role in the photovoltaic performance of perovskite solar cells. Passivation with high-pK(a) CYCl can enhance PCE, while low-pK(a) ANCl leads to more traps and decreased efficiency.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tin(II) Acetylacetonate as a New Type of Tin Compensator Additive for Tin-Based Perovskite Solar Cells

Feidan Gu et al.

Summary: Introducing a new tin compensator Sn (acac) (2) to improve the performance of tin-based perovskite solar cells and increase the maximum power conversion efficiency. In addition to compensating tin, the organic ligand acac (-) can also promote the crystallization process of perovskites.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Heterogeneous 2D/3D Tin-Halides Perovskite Solar Cells with Certified Conversion Efficiency Breaking 14%

Bin-Bin Yu et al.

Summary: By modulating the microstructure of 2D/3D heterogeneous tin-perovskite absorber films through substituting FAI with FPEABr, the oxidation of Sn2+ to Sn4+ and defect density were effectively suppressed, leading to a remarkable increase in conversion efficiency from 9.38% to 14.81%.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

One-Step Synthesis of SnI2•(DMSO)x Adducts for High-Performance Tin Perovskite Solar Cells

Xianyuan Jiang et al.

Summary: This study improved the electron diffusion length and structural homogeneity of tin halide perovskite materials using a synthetic route, resulting in solar cells with a power conversion efficiency of 14.6%.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Nengxu Li et al.

Summary: The liquid medium annealing (LMA) technology shows promise in producing high-quality perovskite films and photovoltaic devices with improved crystal growth modulation and film uniformity. This method opens up an effective avenue for scalable and reproducible quality improvement in perovskite films and devices.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Ionic Liquid Stabilizing High-Efficiency Tin Halide Perovskite Solar Cells

Guixiang Li et al.

Summary: The use of n-butylammonium acetate (BAAc) to modulate tin coordination in the crystallization process results in more compact and preferentially oriented perovskite films. Perovskite solar cells processed with BAAc show higher power conversion efficiency and improved stability, paving the way for controlled tin-based perovskite crystallization in lead-free photovoltaics.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Regulating the Surface Passivation and Residual Strain in Pure Tin Perovskite Films

Manman Hu et al.

Summary: The study investigates the impact of surface passivation and residual strain control on perovskite films on the photovoltaic device efficiency. By engineering the dual effects of surface passivation and residual strain, a record power conversion efficiency of up to 9.06% was achieved, the highest reported in a typical n-i-p architecture.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tin Halide Perovskite Solar Cells: An Emerging Thin-Film Photovoltaic Technology

Xianyuan Jiang et al.

Summary: Tin halide perovskite has emerged as a promising alternative to lead perovskite in solar cell applications, with potentially less toxicity and higher efficiency. Research has shown that with methods to reduce tin oxidation and structural engineering, the performance and stability of TPSCs have been significantly improved.

ACCOUNTS OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Illumination Durability and High-Efficiency Sn-Based Perovskite Solar Cell under Coordinated Control of Phenylhydrazine and Halogen Ions

Chengbo Wang et al.

Summary: The illumination stability and efficiency of Sn-based perovskites have been substantially improved by synergistically introducing phenylhydrazine cation and halogen anions, resulting in a device with a power conversion efficiency of 13.4% and excellent long-term durability. This method offers a universal approach for enhancing the performance of Sn-based perovskites.

MATTER (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress in tin-based perovskite solar cells

Jiupeng Cao et al.

Summary: Organic-inorganic halide perovskite solar cells have shown high efficiency, but many contain toxic lead. Tin-based perovskites are a promising alternative, with the highest efficiency over 13%. This review discusses device design, physical properties, challenges, film preparation techniques, and chemical substitutions to improve the optoelectronic properties of tin-based perovskites and reduce lead content for high-performance and environmentally friendly PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Strain engineering and epitaxial stabilization of halide perovskites

Yimu Chen et al.

NATURE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and stable tin-based perovskite solar cells by introducing π-conjugated Lewis base

Tianhao Wu et al.

SCIENCE CHINA-CHEMISTRY (2020)

添加到收藏夹

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Tin Halide Perovskite Films Made of Highly Oriented 2D Crystals Enable More Efficient and Stable Lead-free Perovskite Solar Cells

Meng Li et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Review Chemistry, Physical

Tin-Based Defects and Passivation Strategies in Tin-Related Perovskite Solar Cells

Bo Li et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Surface-Controlled Oriented Growth of FASnI3 Crystals for Efficient Lead-free Perovskite Solar Cells

Xiangyue Meng et al.

JOULE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

添加到收藏夹

Article Energy & Fuels

Enhanced optical absorption and efficient cascade electron extraction based on energy band alignment double absorbers perovskite solar cells

Ya-Nan Zhang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Relationship between Lattice Strain and Efficiency for Sn-Perovskite Solar Cells

Kohei Nishimura et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Antioxidant Grain Passivation for Air-Stable Tin-Based Perovskite Solar Cells

Qidong Tai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Management of Crystallization Kinetics for Efficient and Stable Low-Dimensional Ruddlesden-Popper (LDRP) Lead-Free Perovskite Solar Cells

Jian Qiu et al.

ADVANCED SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lattice strain causes non-radiative losses in halide perovskites

Timothy W. Jones et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Polymer Doping for High-Efficiency Perovskite Solar Cells with Improved Moisture Stability

Jiexuan Jiang et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air

Makhsud I. Saidaminov et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Minute-Scale Degradation and Shift of Valence-Band Maxima of (CH3NH3)SnI3 and HC(NH2)2SnI3 Perovskites upon Air Exposure

Ryosuke Nishikubo et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Oriented Low-Dimensional Tin Halide Perovskites with Enhanced Stability and Photovoltaic Performance

Yuqin Liao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Importance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells

Tze-Bin Song et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Optics

Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit

Weicheng Pan et al.

NATURE PHOTONICS (2017)

添加到收藏夹

Article Chemistry, Physical

Defect Passivation via a Graded Fullerene Heterojunction in Low-Bandgap Pb-Sn Binary Perovskite Photovoltaics

Adharsh Rajagopal et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions

Tejas S. Sherkar et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nucleation and Crystallization Control via Polyurethane to Enhance the Bendability of Perovskite Solar Cells with Excellent Device Performance

Zengqi Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation

Xiaojia Zheng et al.

ACS ENERGY LETTERS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

High-efficiency solution-processed perovskite solar cells with millimeter-scale grains

Wanyi Nie et al.

SCIENCE (2015)

添加到收藏夹

Article Optics

Lead-free solid-state organic-inorganic halide perovskite solar cells

Feng Hao et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.