4.7 Article

Durable self-cleaning PVDF coating with photocatalysis and superhydrophobic property based on hierarchical coral-like 2D g-C3N4/1D TiO2 hybrid

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Photocatalytic degradation of organic pollutants over MoS2/Ag-ZnFe2O4 Z-scheme heterojunction: Revealing the synergistic effects of exposed crystal facets, defect engineering, and Z-scheme mechanism

Hongrui Zhu et al.

Summary: By utilizing defect engineering, exposed crystal facets, and Z-scheme mechanism, this study successfully prepared MoS2/Ag-ZFO hetero-junction with excellent photocatalytic performance, offering new insights for the design and development of highly active photocatalysts in the future.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

Robust and multifunctional superamphiphobic coating toward effective anti-adhesion

Jianwen Peng et al.

Summary: A robust and multifunctional superamphiphobic coating was successfully fabricated, showing excellent anti-adhesion property in crude oil system, even after harsh mechanical damage and chemical corrosion.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Coatings & Films

Enhanced combustion performance of core-shell aluminum with poly (vinylidene fluoride) interfacial layer: Constructing the combination bridge of aluminum powder and poly(vinylidene fluoride)

Fei Xiao et al.

Summary: Uniform coating of polyvinylidene fluoride (PVDF) on the surface of aluminum powder has been achieved by the self-assembly reaction of tannic acid (TA) and iron ions. The PVDF layer is uniformly coated on aluminum particles, improving their water corrosion resistance. Moreover, the combustion and ignition performance of the aluminum composite are significantly enhanced compared to pure aluminum powder.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Visible-Light Active Flexible and Durable Photocatalytic Antibacterial Ethylene-co-vinyl Acetate-Ag/AgCl/α-Fe2O3 Composite Coating

Svetlana Vihodceva et al.

Summary: This study demonstrates a facile and rapid approach for preparing composite coatings with good adhesion and interface location at room temperature. The synthesized coating exhibits rapid inhibition of bacterial growth under visible-light illumination, showing potential for antibacterial applications.

NANOMATERIALS (2022)

Review Materials Science, Multidisciplinary

Challenges and Opportunities of Using Titanium Dioxide Photocatalysis on Cement-Based Materials

Angelica Maria Castro-Hoyos et al.

Summary: This article discusses the challenges and opportunities of using titanium dioxide in cement-based materials for the development of efficient and sustainable building materials. It presents the photocatalysis of TiO2 and its incorporation in cementitious materials, discusses the self-cleaning, air-purifying, and antimicrobial properties, and proposes complementary technologies and strategies to enhance the multifunctional properties.

COATINGS (2022)

Article Chemistry, Physical

Superhydrophobic and photocatalytic synergistic Self-Cleaning ZnS coating

Kang Wang et al.

Summary: The ZnS superhydrophobic coating was successfully prepared on the zinc substrate using solvothermal method and chemical modification. The coating exhibited excellent physical and chemical self-cleaning properties, forming a Cassie contact state when water droplets contacted the surface.

APPLIED SURFACE SCIENCE (2022)

Article Materials Science, Multidisciplinary

1+1 > 2: Highly efficient removal of organic pollutants by composite nanofibrous membrane based on the synergistic effect of adsorption and photocatalysis

Yuanting Xu et al.

Summary: In this study, a composite nanofibrous membrane material was developed for efficient organic pollutant removal through synergistic adsorption and photocatalysis. The combination resulted in superior removal efficiency, surpassing the individual adsorption and photocatalytic degradation processes, known as a 1 + 1 > 2 effect. Further investigations were conducted on regeneration, reusability, purification ability for multicomponent wastewater, and photocatalytic mechanism.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

TiO2 nanorods doped with g-C3N4 - Polyethylene composite coating for self-cleaning applications

Paula Osorio-Vargas et al.

Summary: In this study, visible-light-absorbing graphitic carbon nitride-TiO2 nanorod nanomaterials were successfully immobilized on flexible low-density polyethylene films using a UVA-induced photocatalytic procedure. The films showed high photocatalytic activity and hydrophilicity under visible light irradiation, likely due to the presence of reactive oxygen species and the unique properties of the nanomaterials.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Engineering, Chemical

Sonochemical assisted impregnation of Bi2WO6 on TiO2 nanorod to form Z-scheme heterojunction for enhanced photocatalytic H2 production

A. R. Mahammed Shaheer et al.

Summary: In this study, a Bi2WO6/TiO2 nanorod heterojunction was prepared, achieving a high photocatalytic hydrogen production rate. The excellent performance was attributed to mechanisms such as reduction of bandgap, quick transport of charge carriers, and efficient charge carrier separation. The Z-scheme band alignment proposed for the heterojunction demonstrated effective utilization for photocatalytic reduction applications.

ADVANCED POWDER TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

High-performance lithium-sulfur battery based on porous N-rich g-C3N4 nanotubes via a self-template method

Meng-rong Wu et al.

Summary: The commercial development of lithium-sulfur batteries is limited by the shuttle effect of lithium polysulfides and the non-conductivity of sulfur. Porous g-C3N4 nanotubes were synthesized and utilized as an efficient sulfur host material, showing excellent cycling stability and rate performance. The tubular structure of PCNNTs alleviates volume expansion during cycling and high N contents enhance adsorption capacity for LPSs.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Article Chemistry, Physical

Well-designed 2D/2D Ti3C2TA/R MXene coupled g-C3N4 heterojunction with in-situ growth of anatase/rutile TiO2 nucleates to boost photocatalytic dry-reforming of methane (DRM) for syngas production under visible light

Azmat Ali Khan et al.

Summary: The study investigated a well-designed 2D/2D g-C3N4/Ti3C2TA/R (CN/TCT) MXene heterojunction with in-situ growth of TiO2-nucleates for boosting the photocatalytic dry reforming of methane. The resulting material showed higher visible light absorption and proficient charge separation, leading to improved H-2 and CO rates compared to using CN and TCT separately. The effect of feed ratio (CO2/CH4) further confirmed efficient sorption process with good recyclability under visible light for the conversion of CO2 and CH4 to syngas.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Review Energy & Fuels

Engineered Graphitic Carbon Nitride-Based Photocatalysts for Visible-Light-Driven Water Splitting: A Review

Shuaijun Wang et al.

Summary: Graphitic carbon nitride (g-C3N4), as a polymeric semiconductor, is gaining attention for photocatalytic energy conversion due to its easy accessibility, metal-free nature, low cost, and environmentally friendly properties. This review explores the latest progress of g-C3N4-based materials in visible-light-driven water splitting to hydrogen, discussing various engineering strategies and synthesis methods, aiming to promote further development in this emerging field.

ENERGY & FUELS (2021)

Article Chemistry, Applied

The preparation of superhydrophobic photocatalytic fluorosilicone/SiO2-TiO2 coating and its self-cleaning performance

Lijun Zong et al.

Summary: The study produced superhydrophobic photocatalytic coatings by adding different amounts of TiO2, which transitioned the coatings from superhydrophobic to superhydrophilic. It was found that coatings with more durable superhydrophobicity maintained their initial wettability and exhibited superior photocatalytic properties. Mechanisms were proposed based on analyzing the microstructures of the coatings.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2021)

Article Engineering, Environmental

Oxygen vacancy-mediated sandwich-structural TiO2-x/ultrathin g-C3N4/TiO2-x direct Z-scheme heterojunction visible-light-driven photocatalyst for efficient removal of high toxic tetracycline antibiotics

Jiaxin Ni et al.

Summary: A surface defect sandwich-structural TiO2-x/ultrathin g-C3N4/TiO2-x direct Z-scheme heterojunction photocatalyst was successfully constructed, showing efficient removal of high toxic tetracycline hydrochloride from wastewater. Its special 3D structure, Z-scheme heterojunction facilitate charge transfer and active species generation, while oxygen vacancies enhance spatial separation of photo-induced carriers.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Chemistry, Multidisciplinary

Emerging polymeric carbon nitride Z-scheme systems for photocatalysis

Guangfu Liao et al.

Summary: This review article presents the latest developments, basic working principles, and characterization technologies of g-C3N4-based Z-scheme photocatalysts, as well as exemplifying their applications in various photocatalytic processes. The review offers perspectives on future challenges and opportunities in this emerging field, highlighting the potential of advanced g-C3N4-based Z-scheme nanostructured materials as highly efficient photocatalysts for diverse applications.

CELL REPORTS PHYSICAL SCIENCE (2021)

Article Green & Sustainable Science & Technology

Solar-light-active silver phosphate/titanium dioxide/silica heterostructures for photocatalytic removal of organic dye

Nadeem Raza et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Materials Science, Multidisciplinary

Recent advances in g-C3N4-based heterojunction photocatalysts

Yunfeng Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Review Environmental Sciences

Synthesis and fabrication of g-C3N4-based materials and their application in elimination of pollutants

Zhongshan Chen et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Materials Science, Multidisciplinary

Facile synthesis and superior photocatalytic and electrocatalytic performances of porous B-doped g-C3N4 nanosheets

Qian Yan et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Review Engineering, Chemical

Membrane synthesis for membrane distillation: A review

L. Eykens et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Materials Science, Coatings & Films

Robust coating with superhydrophobic and self-cleaning properties in either air or oil based on natural zeolite

Weiguo Zeng et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Chemistry, Physical

Graphitic carbon/carbon nitride hybrid as metal-free photocatalyst for enhancing hydrogen evolution

Xiaohan An et al.

APPLIED CATALYSIS A-GENERAL (2017)

Article Engineering, Environmental

Mechanically durable superamphiphobic surfaces via synergistic hydrophobization and fluorination

Xiao-Jing Guo et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Review Chemistry, Multidisciplinary

Heterojunction Photocatalysts

Jingxiang Low et al.

ADVANCED MATERIALS (2017)

Article Biochemical Research Methods

Green Synthesis, Characterization and Electrochemical Behavior of New Thiazole Based Coumarinyl Scaffolds

Aamer Saeed et al.

JOURNAL OF FLUORESCENCE (2016)