☆ 4.7 Article

Online Process Monitoring Based on Proprioceptive Signals for Robotic Grinding

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Artificial Intelligence

Intelligent monitoring of multi-axis robots for online diagnostics of unknown arm deviations

Moncef Soualhi et al.

Summary: This paper aims to develop an effective and practical methodology for online diagnostics of robot drifts based on information fusion of direct and indirect monitoring. The proposed methodology utilizes encoders and heterogeneous sensors to monitor and diagnose the robot drifts. The efficiency and robustness of the methodology are verified through experiments with a real industrial machining multi-axis robot.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

添加到收藏夹

Article Acoustics

An Intelligent Diagnostic Method for Multisource Coupling Faults of Complex Mechanical Systems

Xianbin Sun et al.

Summary: This paper proposes a new method for fault diagnosis of an adaptive multisensor bearing-gear system based on GAF/MTF and ResNet. The method converts the running signals into multi-channel pictures and uses ResNet for fault diagnosis. Experimental results show that the method has high recognition accuracy under different working conditions and different fault types.

SHOCK AND VIBRATION (2023)

添加到收藏夹

Article Automation & Control Systems

External force estimation for industrial robots using configuration optimization

Yan Lu et al.

Summary: This article proposes an external force estimation method that uses a semi-parametric friction model and applies configuration optimization based on Jacobian condition number (JCN) to enhance the performance of online force estimation for industrial robots.

AUTOMATIKA (2023)

添加到收藏夹

Article Computer Science, Information Systems

Attention mechanism and mixup data augmentation for classification of COVID-19 Computed Tomography images

Ozgur Ozdemir et al.

Summary: This study proposes a deep Convolutional Neural Network model with a feature-wise attention layer for automatic classification of COVID-19 CT images. By using mixup data augmentation technique and feature-wise attention layer, the model achieves significant accuracy improvement on the COVID-CT dataset.

JOURNAL OF KING SAUD UNIVERSITY-COMPUTER AND INFORMATION SCIENCES (2022)

添加到收藏夹

Article Automation & Control Systems

Adversarial Autoencoder Based Feature Learning for Fault Detection in Industrial Processes

Kyojin Jang et al.

Summary: Deep learning has emerged as a promising method for nonlinear process monitoring. This study proposes an adversarial autoencoder-based process monitoring system that can extract representative features for fault detection and improve stability and reliability.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Approximate Maximum Likelihood Estimator for Instantaneous Frequency Estimation of Multicomponent Nonstationary Signals

Yang Liu et al.

Summary: Nonstationary signals often occur in various applications. The estimation of instantaneous frequency (IF), which is a crucial feature to capture the time-frequency characteristics of nonstationary signals, has gained increasing attention. In this study, an approximate maximum likelihood estimator (AMLE) is proposed to address the challenges of signals with intersecting or closely spaced IFs. The AMLE utilizes Chebyshev interpolation polynomial and bounded search space to improve computing efficiency and estimation accuracy.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Manufacturing

A deep transfer learning method for monitoring the wear of abrasive belts with a small sample dataset

Zhihang Li et al.

Summary: The wear state of abrasive belts directly affects product quality and cost. A new method based on transfer learning using a multiscale convolutional neural network accurately predicts the replacement time of abrasive belts and achieves precise classification, improving industrial production efficiency.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Machining quality monitoring (MQM) in laser-assisted micro-milling of glass using cutting force signals: an image-based deep transfer learning

Yunhan Kim et al.

Summary: This research introduces an image-based deep transfer learning method for monitoring machining quality in laser-assisted micro-milling of glass. Experimental validation shows that this method has the best classification accuracy and is able to predict and improve machining quality.

JOURNAL OF INTELLIGENT MANUFACTURING (2022)

添加到收藏夹

Article Automation & Control Systems

Intelligent Mechanical Fault Diagnosis Using Multisensor Fusion and Convolution Neural Network

Tingli Xie et al.

Summary: In this article, a novel intelligent fault diagnosis method based on multisensor fusion and convolutional neural network is explored. The proposed method converts multisignal data into RGB images and uses an improved CNN for classification, resulting in higher accuracy in fault diagnosis.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Automation & Control Systems

Surface roughness prediction in robotic belt grinding based on the undeformed chip thickness model and GRNN method

Zhijian Tao et al.

Summary: This paper proposes a surface roughness prediction model based on non-deformed chip thickness and generalized regression neural network in robotic belt grinding, which has significant application value.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

A state-classification approach for light-weight robotic drilling using model-based data augmentation and multi-level deep learning

Hao Lu et al.

Summary: This paper proposes a vibration-based classification approach to detect unqualified holes caused by inclined drilling in aircraft assembly. By establishing a vibration model for robotic drilling and using a deep residual network (Resnet) classifier, the drilling state can be classified as vertical drilling or inclined drilling. Experimental results demonstrate the effectiveness and potential of this method.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A practical and synchronized data acquisition network architecture for industrial robot predictive maintenance in manufacturing assembly lines

Unai Izagirre et al.

Summary: This paper presents a methodology and implementation of a network architecture for industrial robot data acquisition and predictive maintenance, and demonstrates its potential in detecting robot joint failures in a real production environment. The architecture is specifically valuable for industrial practitioners and maintenance personnel.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multi-Source Information Fusion Fault Diagnosis for Gearboxes Based on SDP and VGG

Yuan Fu et al.

Summary: A decision-level approach using multi-sensor-based symmetry dot pattern (SDP) analysis with a Visual Geometry Group 16 network (VGG16) fault diagnosis model was proposed for accurate and comprehensive fault diagnosis of gearbox gear teeth. The method involves feature-level fusion and decision-level fusion to improve the diagnostic accuracy.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Robotic Grinding Process Monitoring by Vibration Signal Based on LSTM Method

Xingwei Zhao et al.

Summary: In this article, a method for monitoring grinding force and material removal in robotic grinding based on acceleration signal is proposed. The framework is established and experiments prove the effectiveness and potential of the method.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Cutting Force Embedded Manifold Learning for Condition Monitoring of Vertical Machining Center

Jing Wang et al.

Summary: This article introduces the use of Ft-SNE for cutting condition monitoring, which can improve the performance of machine tool monitoring through optimization of classification performance and feature selection.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Computer Science, Information Systems

RCSMOTE: Range-Controlled synthetic minority over-sampling technique for handling the class imbalance problem

Paria Soltanzadeh et al.

Summary: RCSMOTE is an improved method based on SMOTE, which addresses the three shortcomings by categorizing samples for proper oversampling and generating synthetic samples within a safe range calculated based on input data characteristics to prevent overlaps with majority class regions.

INFORMATION SCIENCES (2021)

添加到收藏夹

Article Computer Science, Information Systems

FaultFace: Deep Convolutional Generative Adversarial Network (DCGAN) based Ball-Bearing failure detection method

Jairo Viola et al.

Summary: Failure detection is crucial in industries for improving system efficiency and cost reduction, but due to unbalanced datasets and limited failure behavior information, training and validating automated failure detection methods is challenging. The FaultFace methodology uses deep learning techniques to create balanced datasets and shows good performance in detecting failures.

INFORMATION SCIENCES (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Force control-based vibration suppression in robotic grinding of large thin- wall shells

Qilong Wang et al.

Summary: A novel force control-based vibration suppression method is proposed in this paper, which is validated through experiments to effectively control workpiece vibration, increase grinding depth, and improve workpiece surface quality.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

添加到收藏夹

Article Chemistry, Analytical

A New Bearing Fault Diagnosis Method Based on Capsule Network and Markov Transition Field/Gramian Angular Field

Bin Han et al.

Summary: Intelligent fault diagnosis techniques using deep learning models can improve accuracy, with experiments showing the combination of GAF and MTF images as input enhancing the network's capability to obtain complete fault characteristics. The proposed Capsule Network model outperforms other convolutional neural networks in fault diagnosis comparisons.

SENSORS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Manufacturing process monitoring using time-frequency representation and transfer learning of deep neural networks

Yabin Liao et al.

Summary: This study utilizes time-frequency representation and deep neural networks for real-time intelligent manufacturing process monitoring to enhance product quality and reduce costs. By applying deep learning to acoustic emission signals obtained during machine turning operations, the study demonstrates the effectiveness of using CWT technique for more accurate signal details.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A New Interpretable Learning Method for Fault Diagnosis of Rolling Bearings

Dan Zhang et al.

Summary: This article presents a new intelligent fault diagnosis method for rolling bearings using convolutional neural network (CNN) and fuzzy C-means (FCM) clustering algorithm. The proposed method can automatically extract features from the vibration signals of rolling bearings and identify different fault types. The results indicate that this method achieves higher accuracy compared to existing literature.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Sample Augmentation for Intelligent Milling Tool Wear Condition Monitoring Using Numerical Simulation and Generative Adversarial Network

Qinsong Zhu et al.

Summary: This article discusses a method of augmenting the training dataset for AI classifiers by combining numerical simulation and generative adversarial networks, addressing the challenge of obtaining large training samples in TCM applications. Through this approach, experiments show that the classification accuracies of several AI classifiers trained on augmented datasets are close to or equal to 100%.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A transfer convolutional neural network for fault diagnosis based on ResNet-50

Long Wen et al.

NEURAL COMPUTING & APPLICATIONS (2020)

添加到收藏夹

Article Engineering, Manufacturing

An online belt wear monitoring method for abrasive belt grinding under varying grinding parameters

Can Cheng et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Chemistry, Analytical

Simplified Frechet Distance for Generative Adversarial Nets

Chung-Il Kim et al.

SENSORS (2020)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Robotic grinding of complex components: A step towards efficient and intelligent machining - challenges, solutions, and applications

Dahu Zhu et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2020)

添加到收藏夹

Review Engineering, Manufacturing

Modelling and monitoring of abrasive finishing processes using artificial intelligence techniques: A review

Vigneashwara Pandiyan et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Automation & Control Systems

Online Process Monitoring Based on Vibration-Surface Quality Map for Robotic Grinding

Hao Lu et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

添加到收藏夹

Review Computer Science, Artificial Intelligence

A comprehensive review on convolutional neural network in machine fault diagnosis

Jinyang Jiao et al.

NEUROCOMPUTING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Multi-information fusion-based belt condition monitoring in grinding process using the improved-Mahalanobis distance and convolutional neural networks

Junde Qi et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Methodology and Experimental Implementation for Industrial Robot Health Assessment via Torque Signature Analysis

Unai Izagirre et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Automation & Control Systems

Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning

Siyu Shao et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

添加到收藏夹

Article Automation & Control Systems

Velocity Synchronous Linea Chirplet Transform

Yunpeng Guan et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

添加到收藏夹

Article Genetics & Heredity

Identification of lung cancer gene markers through kernel maximum mean discrepancy and information entropy

Zhixun Zhao et al.

BMC MEDICAL GENOMICS (2019)

添加到收藏夹

Article Engineering, Manufacturing

On-line chatter detection in milling using drive motor current commands extracted from CNC

Deniz Aslan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.