☆ 4.7 Article

An Interpretable Multiplication-Convolution Sparse Network for Equipment Intelligent Diagnosis in Antialiasing and Regularization Constraint

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Aerospace

Adaptive sensitive frequency band selection for VMD to identify defective components of an axial piston pump

Anil Kumar et al.

Summary: This study proposes a methodology for adaptive sensitive frequency band selection using single valued neutrosophic entropy based on variational mode decomposition (VMD) to identify defective components in an axial pump. The study applies VMD to decompose vibration signals into modes, and extracts the lower and upper bounds of energy readings for different defect conditions. These energy intervals are converted into single valued neutrosophic sets (SVNSs), and neutrosophic entropy measure is used to quantify the non-linear connection between each bearing defect condition and frequency bands. The mode with the maximum neutrosophic entropy value is selected as the most sensitive frequency band for envelope demodulation to find defective components.

CHINESE JOURNAL OF AERONAUTICS (2022)

添加到收藏夹

Article Automation & Control Systems

From Artificial Intelligence to Explainable Artificial Intelligence in Industry 4.0: A Survey on What, How, and Where

Imran Ahmed et al.

Summary: This article provides a comprehensive survey of AI and XAI-based methods in the context of Industry 4.0. It discusses the technologies enabling Industry 4.0, investigates the main methods used in the literature, and addresses the future research directions and the importance of responsible and human-centric AI and XAI systems.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Artificial intelligence in safety-critical systems: a systematic review

Yue Wang et al.

Summary: This study systematically reviews the application of artificial intelligence in safety-critical systems, presenting current status and future research directions. It provides valuable insights for industry practitioners and regulators, marking the first step towards advancing AI in the safety-critical domain.

INDUSTRIAL MANAGEMENT & DATA SYSTEMS (2022)

添加到收藏夹

Article Automation & Control Systems

WaveletKernelNet: An Interpretable Deep Neural Network for Industrial Intelligent Diagnosis

Tianfu Li et al.

Summary: The article introduces a novel wavelet-driven deep neural network, WaveletKernelNet (WKN), for mechanical fault diagnosis, which is more effective than traditional CNN in terms of accuracy and convergence speed. The network is designed with a continuous wavelet convolutional layer to discover more meaningful kernels and provides a customized kernel bank for extracting defect-related impact components.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2022)

添加到收藏夹

Article Automation & Control Systems

ConditionSenseNet: A Deep Interpolatory ConvNet for Bearing Intelligent Diagnosis Under Variational Working Conditions

Yinjun Wang et al.

Summary: This article introduces a new deep learning architecture DICN that can handle variational working conditions in bearing intelligent diagnosis. The architecture dynamically expresses hidden key features in samples and suppresses the influence of working conditions, especially interpolating variational working factors in this nonlinear fitting model.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

OSESgram: Data-Aided Method for Selection of Informative Frequency Bands for Bearing Fault Diagnosis

Bingchang Hou et al.

Summary: Bearing fault diagnosis is of great significance. This article proposes a data-driven method for selecting informative frequency bands, which is more robust and effective compared to traditional approaches.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

A New Adaptive Interpretable Fault Diagnosis Model for Complex System Based on Belief Rule Base

Can Li et al.

Summary: This article develops a new adaptive interpretable fault detection and diagnosis model based on belief rule base for complex systems to address the problems of few fault samples, complex system mechanism, and loss of interpretability in modeling process.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Interpretable Neural Network via Algorithm Unrolling for Mechanical Fault Diagnosis

Botao An et al.

Summary: This article proposes an interpretable neural network, named NISTA-Net, for mechanical fault diagnosis. The network is generated by unrolling the nested iterative soft thresholding algorithm (NISTA) and has a clear theoretical basis. A visualization method is also proposed to examine the meaningful features learned by NISTA-Net. Simulation and experiments demonstrate that NISTA-Net achieves superior performance in fault diagnosis compared to other advanced networks. A systematic approach is summarized to inspire further research in interpretable fault diagnosis networks.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Signal-Transformer: A Robust and Interpretable Method for Rotating Machinery Intelligent Fault Diagnosis Under Variable Operating Conditions

Jian Tang et al.

Summary: This study proposes an intelligent fault diagnosis model called signal-transformer (S-Transformer), which focuses on the problem of variable operating conditions. The model employs signal embedding and multihead self-attention mechanism to achieve a deep representation of signal state features. Additionally, an attention visualization method is used to increase interpretability.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2022)

添加到收藏夹

Article Automation & Control Systems

Manifold Sensing-Based Convolution Sparse Self-Learning for Defective Bearing Morphological Feature Extraction

Quanchang Li et al.

Summary: This article proposes a convolutional sparse self-learning (CSSL) method for adaptive feature enhancement. By using image sparse processing and manifold sensing, desired morphological structures are represented and mined effectively, leading to superior performance in analyzing defective bearing data with transient features enhancement.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

添加到收藏夹

Article Engineering, Mechanical

A novel correntropy-based band selection method for the fault diagnosis of bearings under fault-irrelevant impulsive and cyclostationary interferences

Qing Ni et al.

Summary: The novel and robust IFB selection method based on the fault energy of correntropy (FECgram) is proposed to address the challenges of demodulation analysis in bearing fault diagnosis, improving the effectiveness of fault feature extraction by overcoming interferences. The superiority of FECgram in combination with squared envelope spectrum is validated on both simulation data and different challenging experimental datasets, showing its potential in practical applications for bearing fault diagnosis.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Automation & Control Systems

An Explainable Convolutional Neural Network for Fault Diagnosis in Linear Motion Guide

Min Su Kim et al.

Summary: In this article, a deep learning-based fault diagnosis model is proposed using vibration sensor signals to monitor the status of LM guides for predicting and diagnosing potential faults. By learning vibration signals in the time domain and visualizing classification criteria in the frequency domain, the model helps to explain the characteristics of normal and faulty data in LM guide systems under various conditions.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Applications of Unsupervised Deep Transfer Learning to Intelligent Fault Diagnosis: A Survey and Comparative Study

Zhibin Zhao et al.

Summary: Recent progress in intelligent fault diagnosis relies heavily on deep representation learning and labeled data. However, the unsupervised deep transfer learning-based IFD still faces many open and fundamental issues.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

The Traverse Symplectic Correlation-Gram (TSCgram): A New and Effective Method of Optimal Demodulation Band Selection for Rolling Bearing

Jinde Zheng et al.

Summary: Resonance demodulation is a commonly used method for obtaining fault information, with the main challenge being to find a suitable frequency band for demodulation. Autogram is a method recently proposed for optimal demodulation frequency band selection utilizing a binary tree structure. However, the frequency band information obtained by Autogram can be easily missed. To address this issue, a 1/3 binary tree structure is used to segment the frequency domain and improve Autogram's segmentation accuracy. Despite these improvements, the method proposed in this article, TSCgram, overcomes the shortcomings of Autogram and offers better fault diagnostic results for rolling bearing analysis.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

添加到收藏夹

Article Computer Science, Information Systems

Gearbox Fault Diagnosis Using Multiscale Sparse Frequency-Frequency Distributions

Luke Zhang et al.

Summary: This paper proposes a novel method for achieving fault frequency detection more effectively in early-stage gear faults. The method uses sparse decomposition and orthogonal matching pursuit to refine modulation components and multiscale-sparse frequency-frequency distribution to augment existing fault-related harmonic components. Experimental results have verified the effectiveness and superiority of the proposed method for gear fault detection compared to other analysis methods.

IEEE ACCESS (2021)

添加到收藏夹

Article Computer Science, Information Systems

An Explainable Neural Network for Fault Diagnosis With a Frequency Activation Map

Min Su Kim et al.

Summary: This study presents an explainable neural network model that visualizes the classification criteria with a frequency activation map. By focusing on specific frequency of vibration signals, the frequency activation map can classify normal and faulty states effectively.

IEEE ACCESS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Interpretable Convolutional Neural Network Through Layer-wise Relevance Propagation for Machine Fault Diagnosis

John Grezmak et al.

IEEE SENSORS JOURNAL (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fault Diagnosis of Rotating Machinery Based on Deep Reinforcement Learning and Reciprocal of Smoothness Index

Wenxin Dai et al.

IEEE SENSORS JOURNAL (2020)

添加到收藏夹

Article Automation & Control Systems

Deep Residual Shrinkage Networks for Fault Diagnosis

Minghang Zhao et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Robust Interpretable Deep Learning for Intelligent Fault Diagnosis of Induction Motors

Firas Ben Abid et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

DCNN-Based Multi-Signal Induction Motor Fault Diagnosis

Siyu Shao et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Blind source extraction of acoustic emission signals for rail cracks based on ensemble empirical mode decomposition and constrained independent component analysis

Kangwei Wang et al.

MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Mechanical

A deep learning method for bearing fault diagnosis based on Cyclic Spectral Coherence and Convolutional Neural Networks

Zhuyun Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Automation & Control Systems

Understanding and Learning Discriminant Features based on Multiattention 1DCNN for Wheelset Bearing Fault Diagnosis

Huan Wang et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

添加到收藏夹

Article Automation & Control Systems

Deep learning algorithms for rotating machinery intelligent diagnosis: An open source benchmark study

Zhibin Zhao et al.

ISA TRANSACTIONS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Vibration Signals Analysis by Explainable Artificial Intelligence (XAI) Approach: Application on Bearing Faults Diagnosis

Han-Yun Chen et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Deep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery

Shengnan Tang et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Rolling Element Bearings Fault Diagnosis Based on a Novel Optimal Frequency Band Selection Scheme

Qing Ni et al.

IEEE ACCESS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Intelligent Bearing Fault Diagnosis Method Combining Compressed Data Acquisition and Deep Learning

Jiedi Sun et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2018)

添加到收藏夹

Article Engineering, Mechanical

Deep normalized convolutional neural network for imbalanced fault classification of machinery and its understanding via visualization

Feng Jia et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Review Engineering, Mechanical

Artificial intelligence for fault diagnosis of rotating machinery: A review

Ruonan Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

Time-frequency analysis based on ensemble local mean decomposition and fast kurtogram for rotating machinery fault diagnosis

Lei Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Energy-Fluctuated Multiscale Feature Learning With Deep ConvNet for Intelligent Spindle Bearing Fault Diagnosis

Xiaoxi Ding et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2017)

添加到收藏夹

Article Engineering, Mechanical

Distributed bearing fault diagnosis based on vibration analysis

Bostjan Dolenc et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Engineering, Mechanical

Gearbox coupling modulation separation method based on match pursuit and correlation filtering

Guolin He et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Engineering, Mechanical

A real-time fault diagnosis methodology of complex systems using object-oriented Bayesian networks

Baoping Cai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

Variational Mode Decomposition

Konstantin Dragomiretskiy et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2014)

添加到收藏夹

Article Acoustics

Vibration signal models for fault diagnosis of planetary gearboxes

Zhipeng Feng et al.

JOURNAL OF SOUND AND VIBRATION (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.