相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A selective strategy for determining suitable structure and fatigue behavior study of minimal surface scaffolds fabricated by EBM
Fei Liu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2023)
Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing
Karel Slamecka et al.
MATERIALS & DESIGN (2023)
Level of Activity Changes Increases the Fatigue Life of the Porous Magnesium Scaffold, as Observed in Dynamic Immersion Tests, over Time
Risky Utama Putra et al.
SUSTAINABILITY (2023)
Open-porous magnesium-based scaffolds withstand in vitro corrosion under cyclic loading: A mechanistic study
Roxane Bonithon et al.
BIOACTIVE MATERIALS (2023)
Enhancement in the fatigue resistances of triply periodic surfaces-based scaffolds
Zhiqiang Liu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)
Investigating the Effects of Geometrical Parameters of Re-Entrant Cells of Aluminum 7075-T651 Auxetic Structures on Fatigue Life
Amir Ghiasvand et al.
COATINGS (2023)
Additively manufactured meta-biomaterials: A state-of-the-art review
Swapnil Vyavahare et al.
COMPOSITE STRUCTURES (2023)
Computational homogenization of fatigue in additively manufactured microlattice structures
F. Mozafari et al.
COMPUTATIONAL MECHANICS (2023)
Mechanisms of fatigue crack initiation and propagation in auxetic meta-biomaterials
H. M. A. Kolken et al.
ACTA BIOMATERIALIA (2022)
Morphological and mechanical characterisation of three-dimensional gyroid structures fabricated by electron beam melting for the use as a porous biomaterial
C. Polley et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)
Experimental and numerical investigation on fatigue damage in micro-lattice materials by Digital Volume Correlation and μCT-based finite element models
L. Boniotti et al.
ENGINEERING FRACTURE MECHANICS (2022)
Computational model for low cycle fatigue analysis of lattice materials: Incorporating theory of critical distance with elastoplastic homogenization
Danial Molavitabrizi et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2022)
Constitutive and damage modelling of selective laser melted Ti-6Al-4V lattice structure subjected to low cycle fatigue
Peng Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Modelling and predicting of the LCF-behaviour of aluminium auxetic structures
Branko Necemer et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Uniaxial Compression Properties and Compression Fatigue Performance of Selective Laser Melted Ti-6Al-4V Cellular Structure
Ming-Wei Wu et al.
METALS AND MATERIALS INTERNATIONAL (2022)
Tailorable and predictable mechanical responses of additive manufactured TPMS lattices with graded structures
Lei Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Trabecular-like Ti-6Al-4V scaffold for bone repair: A diversified mechanical stimulation environment for bone regeneration
Huixin Liang et al.
COMPOSITES PART B-ENGINEERING (2022)
Design and fatigue analysis of diagonally reinforced structures with a negative Poisson's ratio lattice material
Liuxi Cai et al.
MATERIALS RESEARCH EXPRESS (2022)
The role of pore structures on the fatigue properties of additively manufactured porous tantalum scaffolds produced by electron beam powder bed fusion
Yu Guo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold
Danlei Zhao et al.
ACTA BIOMATERIALIA (2022)
Design of Novel Isosurface Strut-based Lattice Structures: Effective Stiffness, Strength, Anisotropy and Fatigue Properties
Asha Viswanath et al.
MATERIALS & DESIGN (2022)
The role of node fillet, unit-cell size and strut orientation on the fatigue strength of Ti-6Al-4V lattice materials additively manufactured via laser powder bed fusion
M. Dallago et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Compression Behavior of Graded NiTi Gyroid-Structures Fabricated by Laser Powder Bed Fusion Additive Manufacturing Under Monotonic and Cyclic Loading
Wenliang Chen et al.
JOM (2021)
Fatigue performance of auxetic meta-biomaterials
H. M. A. Kolken et al.
ACTA BIOMATERIALIA (2021)
Fatigue behaviour and biocompatibility of additively manufactured bioactive tantalum graded lattice structures for load-bearing orthopaedic applications
Wenliang Chen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants
Dalia Mahmoud et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Robustly printable freeform thermal metamaterials
Wei Sha et al.
NATURE COMMUNICATIONS (2021)
Influence of relative density on quasi-static and fatigue failure of lattice structures in Ti6Al4V produced by laser powder bed fusion
Markel Alana et al.
SCIENTIFIC REPORTS (2021)
Quasi-Static compressive responses and fatigue behaviour of Ti-6Al-4 V graded lattice structures fabricated by laser powder bed fusion
Long Bai et al.
MATERIALS & DESIGN (2021)
Fatigue and dynamic biodegradation behavior of additively manufactured Mg scaffolds
Yinchuan Wang et al.
ACTA BIOMATERIALIA (2021)
Micro-CT based trans-scale damage analysis of 3D braided composites with pore defects
Lei Ge et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Enhanced fatigue performance of auxetic honeycomb/substrate structures under thermal cycling
J. S. Hu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Numerical and Experimental Investigation of Cumulative Fatigue Damage under Random Dynamic Cyclic Loads of Lattice Structures Manufactured by Laser Powder Bed Fusion
Marco Pisati et al.
METALS (2021)
Partial Bone Formation in Additive Manufactured Porous Implants Reduces Predicted Stress and Danger of Fatigue Failure
Vee San Cheong et al.
ANNALS OF BIOMEDICAL ENGINEERING (2020)
An Investigation of the Enhanced Fatigue Performance of Low-porosity Auxetic Metamaterials
L. Francesconi et al.
EXPERIMENTAL MECHANICS (2020)
Corrosion fatigue behavior of additively manufactured biodegradable porous zinc
Y. Li et al.
ACTA BIOMATERIALIA (2020)
Mechanistic understanding of compression-compression fatigue behavior of functionally graded Ti-6Al-4V mesh structure fabricated by electron beam melting
Q. S. Wang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
A novel auxetic structure based bone screw design: Tensile mechanical characterization and pullout fixation strength evaluation
Yan Yao et al.
MATERIALS & DESIGN (2020)
The computational LCF-analyses of chiral and Re-entrant auxetic structure using the direct cyclic algorithm
Branko Necemer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Soft optical metamaterials
Yixin Chen et al.
NANO CONVERGENCE (2020)
Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing
Alejandro Yanez et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
An experimental and numerical study of the high cycle multiaxial fatigue strength of titanium lattice structures produced by Selective Laser Melting (SLM)
Khalil Refai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing
Alexis Burr et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Meta-biomaterials
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2020)
Corrosion fatigue behavior of additively manufactured biodegradable porous iron
Y. Li et al.
CORROSION SCIENCE (2019)
Assessing the cracking behavior of auxetic cellular structures by using both a numerical and an experimental approach
J. Kramberger et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Computational modelling of strut defects in SLM manufactured lattice structures
Bill Lozanovski et al.
MATERIALS & DESIGN (2019)
Compression-compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting
Lei Yang et al.
ACTA MATERIALIA (2019)
From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
S. M. Ahmadi et al.
ACTA BIOMATERIALIA (2019)
Mechanical performance of additively manufactured meta-biomaterials
Amir A. Zadpoor
ACTA BIOMATERIALIA (2019)
Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type
S. M. Ahmadi et al.
ACTA BIOMATERIALIA (2018)
Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
S. Zhao et al.
ACTA MATERIALIA (2018)
Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials
R. Hedayati et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys
R. Hedayati et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Heat treatment enhancing the compressive fatigue properties of open-cellular Ti-6Al-4V alloy prototypes fabricated by electron beam melting
Wei Yuan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
M. Dallago et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Towards deployable meta-implants
F. S. L. Bobbert et al.
JOURNAL OF MATERIALS CHEMISTRY B (2018)
Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
Helena M. A. Kolken et al.
MATERIALS HORIZONS (2018)
Fatigue behaviour and equivalent diameter of single Ti-6Al-4V struts fabricated by Electron Bean Melting orientated to porous lattice structures
A. Perez-Sanchez et al.
MATERIALS & DESIGN (2018)
Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM
Dheyaa S. J. Al-Saedi et al.
MATERIALS & DESIGN (2018)
Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications
Arash Ataee et al.
MATERIALS & DESIGN (2018)
Design of graded lattice structure with optimized mesostructures for additive manufacturing
Yiqiang Wang et al.
MATERIALS & DESIGN (2018)
Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
Karel Lietaert et al.
SCIENTIFIC REPORTS (2018)
Low Fatigue Dynamic Auxetic Lattices With 3D Printable, Multistable, and Tuneable Unit Cells
Eesha Khare et al.
FRONTIERS IN MATERIALS (2018)
Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials
Amir A. Zadpoor
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison
M. Speirs et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Compression fatigue behavior and failure mechanism of porous titanium for biomedical applications
Fuping Li et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading
Joep de Krijger et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
Michaela Fousova et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Mechanics of additively manufactured biomaterials
Amir A. Zadpoor
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?
R. Hedayati et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Fatigue crack propagation in additively manufactured porous biomaterials
R. Hedayati et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Rational design of reconfigurable prismatic architected materials
Johannes T. B. Overvelde et al.
NATURE (2017)
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
J. B. Berger et al.
NATURE (2017)
Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
H. Montazerian et al.
MATERIALS & DESIGN (2017)
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
Compressive properties of functionally graded lattice structures manufactured by selective laser melting
Sing Ying Choy et al.
MATERIALS & DESIGN (2017)
Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting
Brecht van Hooreweder et al.
ACTA BIOMATERIALIA (2017)
Selective laser melting porous metallic implants with immobilized silver nanoparticles kill and prevent biofilm formation by methicillin-resistant Staphylococcus aureus
Ingmar A. J. van Hengel et al.
BIOMATERIALS (2017)
Simultaneous Delivery of Multiple Antibacterial Agents from Additively Manufactured Porous Biomaterials to Fully Eradicate Planktonic and Adherent Staphylococcus aureus
S. Bakhshandeh et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Metallic Biomaterials: Current Challenges and Opportunities
Karthika Prasad et al.
MATERIALS (2017)
Rational design of soft mechanical metamaterials: Independent tailoring of elastic properties with randomness
M. J. Mirzaali et al.
APPLIED PHYSICS LETTERS (2017)
Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties
F. S. L. Bobbert et al.
ACTA BIOMATERIALIA (2017)
Design of cut unit geometry in hierarchical kirigami-based auxetic metamaterials for high stretchability and compressibility
Yichao Tang et al.
EXTREME MECHANICS LETTERS (2017)
Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting
Y. J. Liu et al.
ACTA MATERIALIA (2017)
Additively manufactured metallic pentamode meta-materials
R. Hedayati et al.
APPLIED PHYSICS LETTERS (2017)
Pluripotent stem cell expansion and neural differentiation in 3-D scaffolds of tunable Poisson's ratio
Yuanwei Yan et al.
ACTA BIOMATERIALIA (2017)
Isotropic Negative Thermal Expansion Metamaterials
Lingling Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions
S. Amin Yavari et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Double-Negative Mechanical Metamaterials Displaying Simultaneous Negative Stiffness and Negative Poisson's Ratio Properties
Trishan A. M. Hewage et al.
ADVANCED MATERIALS (2016)
Thermal properties of epoxy resin based thermal interfacial materials by filling Ag nanoparticle-decorated graphene nanosheets
Lifei Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials
R. Hedayati et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell
R. Hedayati et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
S. Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures
M. Afshar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders
Sedat Ozbilen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models
R. Hedayati et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures
A. Zargarian et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Qiming Wang et al.
PHYSICAL REVIEW LETTERS (2016)
Controlling sound with acoustic metamaterials
Steven A. Cummer et al.
NATURE REVIEWS MATERIALS (2016)
Negative Poisson's ratios in tendons: An unexpected mechanical response
Ruben Gatt et al.
ACTA BIOMATERIALIA (2015)
Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
S. Amin Yavari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Designable dual-material auxetic metamaterials using three-dimensional printing
Kan Wang et al.
MATERIALS & DESIGN (2015)
Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
Seyed Mohammad Ahmadi et al.
MATERIALS (2015)
Vibrant times for mechanical metamaterials
Johan Christensen et al.
MRS COMMUNICATIONS (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Flexible metasurfaces and metamaterials: A review of materials and fabrication processes at micro- and nano-scales
Sumeet Walia et al.
APPLIED PHYSICS REVIEWS (2015)
FULL REGENERATION OF SEGMENTAL BONE DEFECTS USING POROUS TITANIUM IMPLANTS LOADED WITH BMP-2 CONTAINING FIBRIN GELS
J. van der Stok et al.
EUROPEAN CELLS & MATERIALS (2015)
Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Eric B. Duoss et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Mechanical metamaterials produce ultralight, ultrastiff lattices
Tim Palucka
MRS BULLETIN (2014)
Ultralight, Ultrastiff Mechanical Metamaterials
Xiaoyu Zheng et al.
SCIENCE (2014)
3D Soft Metamaterials with Negative Poisson's Ratio
Sahab Babaee et al.
ADVANCED MATERIALS (2013)
Fatigue behavior of thin-walled grade 2 titanium samples processed by selective laser melting. Application to life prediction of porous titanium implants
P. Lipinski et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Fatigue behavior of porous biomaterials manufactured using selective laser melting
S. Amin Yavari et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Hyperbolic metamaterials (vol 7, pg 948, 2013)
Alexander Poddubny et al.
NATURE PHOTONICS (2013)
Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Cecile M. Bidan et al.
ADVANCED HEALTHCARE MATERIALS (2013)
The Effect of Negative Poisson's Ratio Polyurethane Scaffolds for Articular Cartilage Tissue Engineering Applications
Yeong Jun Park et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2013)
Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting
S. J. Li et al.
ACTA MATERIALIA (2012)
Micro-/Nanostructured Mechanical Metamaterials
Jae-Hwang Lee et al.
ADVANCED MATERIALS (2012)
Effects of Muscle Fatigue on the Ground Reaction Force and Soft-Tissue Vibrations During Running: A Model Study
Ali Asadi Nikooyan et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2012)
Compression fatigue behavior of laser processed porous NiTi alloy
Sheldon Bernard et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Mechanical metamaterials with negative compressibility transitions
Zachary G. Nicolaou et al.
NATURE MATERIALS (2012)
How Linear Tension Converts to Curvature: Geometric Control of Bone Tissue Growth
Cecile M. Bidan et al.
PLOS ONE (2012)
Dark acoustic metamaterials as super absorbers for low-frequency sound
Jun Mei et al.
NATURE COMMUNICATIONS (2012)
Porous scaffold design using the distance field and triply periodic minimal surface models
Dong J. Yoo
BIOMATERIALS (2011)
Computer-aided Porous Scaffold Design for Tissue Engineering Using Triply Periodic Minimal Surfaces
Dong-Jin Yoo
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
Nikolas W. Hrabe et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)
Negative linear compressibility of hexagonal honeycombs and related systems
Joseph N. Grima et al.
SCRIPTA MATERIALIA (2011)
Modeling muscle activity to study the effects of footwear on the impact forces and vibrations of the human body during running
Amir Abbas Zadpoor et al.
JOURNAL OF BIOMECHANICS (2010)
Acoustic cloaking in three dimensions using acoustic metamaterials
Huanyang Chen et al.
APPLIED PHYSICS LETTERS (2007)
A micromechanical model for predicting the fracture toughness of functionally graded foams
Seon-Jae Lee et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
A model-based parametric study of impact force during running
Amir Abbas Zadpoor et al.
JOURNAL OF BIOMECHANICS (2007)
Estimation of muscle forces and joint moments using a forward-inverse dynamics model
TS Buchanan et al.
MEDICINE AND SCIENCE IN SPORTS AND EXERCISE (2005)
An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo
DG Lloyd et al.
JOURNAL OF BIOMECHANICS (2003)
Average patient walking activity approaches 2 million cycles per year - Pedometers under-record walking activity
M Silva et al.
JOURNAL OF ARTHROPLASTY (2002)
Surface curvatures of trabecular bone microarchitecture
H Jinnai et al.
BONE (2002)
Foam topology bending versus stretching dominated architectures
VS Deshpande et al.
ACTA MATERIALIA (2001)