☆ 4.6 Article

Refinement of nanoporous copper by dealloying the Al-Cu alloy in NaOH solution containing sodium dodecyl sulfate

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Metallurgy & Metallurgical Engineering

Sodium dodecyl sulfate (SDS) as an effective corrosion inhibitor for Mg-8Li-3Al alloy in aqueous NaCl: A combined experimental and theoretical investigation

Honggun Song et al.

Summary: The corrosion inhibition behavior of Mg-8Li-3Al alloy in NaCl solution was studied using various experimental and computational techniques. It was found that the addition of sodium dodecyl sulfate (SDS) effectively improved the corrosion resistance of the alloy. The formation of a dense SDS-adsorbed layer on the alloy surface was confirmed by SEM and SKPFM analysis. The study also explored the theoretical calculations of the separation energy and adsorption energy of SDS on the Mg surface, and proposed a corrosion inhibition mechanism.

JOURNAL OF MAGNESIUM AND ALLOYS (2023)

添加到收藏夹

Article Energy & Fuels

Structured nanoporous copper catalysts prepared by laser powder bed fusion and dealloying for on-board methanol steam reforming

Chuandong Li et al.

Summary: In this study, a structured Cu-based catalyst with a body-centered cubic skeleton was prepared using laser powder bed fusion combined with a dealloying method. The catalytic performance of the 3D structured Cu-based catalyst is superior to those of reported catalysts with 93.6% methanol conversion and a CO concentration of less than 0.3%. Computational fluid dynamics simulations confirmed the excellent mass and heat transfer performance and low pressure drop of the 3D-structured copper-based catalyst. Structured Cu-based catalysts have great potential for applications in FCVs.

FUEL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergistic corrosion inhibition effects of quaternary ammonium salt cationic surfactants and thiourea on Q235 steel in sulfuric acid: Experimental and theoretical research

Tianyu Zheng et al.

Summary: The corrosion resistance of Q235 steel treated with different corrosion inhibitors in sulfuric acid was studied. Results showed that DTAB-Thiourea and DDBAB-Thiourea have strong synergistic effects and can effectively inhibit corrosion. The adsorption forms of the inhibitors on the steel surface were investigated and explained using density functional theory.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A novel dealloying strategy for fabricating nanoporous Ag via ζ′-AgGa alloy

Zhongming Jiang et al.

Summary: A mild strategy was developed for fabricating nanoporous silver (np-Ag) through preparation of Ag-Ga alloys followed by electrochemical dealloying. The addition of sodium dodecyl sulfate (SDS) resulted in the minimum pore size. This method provides a new strategy for the industrial production of np-Ag.

NANOTECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Time-dependent power law function for the post-dealloying chemical coarsening of nanoporous gold derived using small-angle X-ray scattering

Alexander K. Ng et al.

Summary: Dealloyed nanoporous gold spontaneously coarsens when exposed to moderate temperatures or non-inert gases or liquids at room temperature. This study focuses on post-dealloying chemical coarsening behavior of aged nanoporous gold samples in nitric acid at room temperature, revealing a time-dependent power law relationship between ligament size and coarsening time. The findings will guide the design of nanoporous gold with desired structure size for optimizing its (electro)chemical properties.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Physics, Applied

Enhanced electrochemical actuation of nanoporous gold-polypyrrole hybrid under load

J. Li et al.

Summary: This study examines the strain response of a nanoporous gold-polypyrrole electrochemical actuator under compression. Contrary to previous studies, it is found that the strain amplitudes of this hybrid material increase under load, even during plastic deformation.

APPLIED PHYSICS LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis and catalytical properties of hierarchical nanoporous copper from θ and η phases in CuAl alloys

Yan-Rung Su et al.

Summary: The study demonstrates that nanoporous copper (NPC) has a higher current density for CO2 reduction reaction, 2-5 times higher than copper foil. The effect of ligament size on the current density is more pronounced, with the NPC with a ligament size of 76 nm obtaining peak current density. The product distribution indicates that NPC with a hierarchical structure has higher Faraday efficiency of ethylene compared to conventional NPC or copper foil at high overpotential.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simultaneous Enhancement of Actuation Strain and Mechanical Strength of Nanoporous Ni-Mn Actuators

Chuan Cheng et al.

Summary: Introducing a secondary actuation metal into the primary actuation metal network can mitigate the negative effects of a large electrode surface area on actuation stability and mechanical strength. In the nanoporous Ni-Mn actuator, the redox reaction of Mn is more efficient than that of Ni, resulting in a reversible high strain.

ADVANCED ELECTRONIC MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoporous gold-polypyrrole hybrid electrochemical actuators with tunable elasticity

Jie Li et al.

Summary: This study reveals a new phenomenon of reversible change in the elastic response of hybrid electrochemical actuators, attributed to the thickness of the polypyrrole layer. The interaction between polypyrrole and gold, as well as solvent intake, play crucial roles in determining the elastic properties of the material.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Robust Metallic Actuators Based on Nanoporous Gold Rapidly Dealloyed from Gold-Nickel Precursors

Chuan Cheng et al.

Summary: Dealloyed nanoporous gold exhibits high relative density, stability, and reversible actuation, making it a versatile material for various applications in electrochemical functionality and actuators.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Ultrafine Nanoporous Gold via Thiol Compound-Mediated Chemical Dealloying

Xufen Xiao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying

Ilya Vladimirovich Okulov et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Giant electrochemical actuation in a nanoporous silicon-polypyrrole hybrid material

Manuel Brinker et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Open Porous α plus β Titanium Alloy by Liquid Metal Dealloying for Biomedical Applications

Stefan Alexander Berger et al.

METALS (2020)

添加到收藏夹

Article Chemistry, Physical

Electrochemical dealloying as a tool to tune the porosity, composition and catalytic activity of nanomaterials

Christian Rurainsky et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Fabrication and Photocatalytic Activity of Cu2O Nanobelts on Nanoporous Cu Substrate

Yun Li et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Atomic force microscopy study of nanoporous gold surface and electrochemical properties

Panpan Gao et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface-driven actuation: Sign reversal under load and surface load-memory effect

Ling-Zhi Liu et al.

PHYSICAL REVIEW MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Molecular dynamics simulations of aggregation behavior of sodium dodecyl sulfate on SiO2 and CaCO3 surfaces

Xiumin Wang et al.

SURFACE AND INTERFACE ANALYSIS (2018)

添加到收藏夹

Article Electrochemistry

Synthesis of uniform bulk nanoporous palladium with tunable structure

Shan Shi et al.

ELECTROCHIMICA ACTA (2018)

添加到收藏夹

Article Chemistry, Physical

Coarse-Grain Molecular Dynamics Simulations To Investigate the Bulk Viscosity and Critical Micelle Concentration of the Ionic Surfactant Sodium Dodecyl Sulfate (SDS) in Aqueous Solution

Yosadara Ruiz-Morales et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional bicontinuous nanoporous materials by vapor phase dealloying

Zhen Lu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Designing and fabricating of time-depend self-strengthening inhibitor film: Synergistic inhibition of sodium dodecyl sulfate and 4-mercaptopyridine for mild steel

Peng Han et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Chemistry, Physical

Nanoporous PdCu alloy as an excellent electrochemical sensor for H2O2 and glucose detection

Hongxiao Yang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

添加到收藏夹

Article Chemistry, Analytical

Studying the effect of dealloying Cu-Au nanostructures on their mercury sensing performance

Ylias M. Sabri et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Engineering the internal surfaces of three-dimensional nanoporous catalysts by surfactant-modified dealloying

Zhili Wang et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced corrosion resistance of mild steel in 1 M HCl solution by trace amount of 2-phenyl-benzothiazole derivatives: Experimental, quantum chemical calculations and molecular dynamics (MD) simulation studies

Zohreh Salarvand et al.

CORROSION SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Nanostructured copper/copper oxide hybrids: combined experimental and theoretical studies

Jie Li et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Large-scale growth of sharp gold nano-cones for single-molecule SERS detection

Ling Zhang et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors

Joung Wook Kim et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Porous Gold with a Nested-Network Architecture and Ultrafine Structure

Zhen Qi et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication and characterization of bulk nanoporous copper by dealloying Al-Cu alloy slices

Jie Li et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Article Electrochemistry

Nanoporous Metals Fabricated through Electrochemical Dealloying of Ag-Au-Pt with Systematic Variation of Au:Pt Ratio

Adrian A. Vega et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

添加到收藏夹

Article Electrochemistry

Refinement of Nanoporous Copper by Dealloying MgCuY Amorphous Alloys in Sulfuric Acids Containing Polyvinylpyrrolidone

Zhenhua Dan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

添加到收藏夹

Article Electrochemistry

Refinement of Nanoporous Silver by Adding Surfactant to the Electrolyte

Zhiqiang Li et al.

ECS ELECTROCHEMISTRY LETTERS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nucleation and growth of nanoporous copper ligaments during electrochemical dealloying of Mg-based metallic glasses

Xuekun Luo et al.

CORROSION SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Influence of magnetic field on dealloying of Al-25Ag alloy and formation of nanoporous Ag

Tingting Song et al.

CRYSTENGCOMM (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning the ligament/channel size of nanoporous copper by temperature control

Yan Wang et al.

CRYSTENGCOMM (2012)

添加到收藏夹

Article Chemistry, Physical

Atomic origins of the high catalytic activity of nanoporous gold

Takeshi Fujita et al.

NATURE MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dealloying behavior of rapidly solidified Al-Ag alloys to prepare nanoporous Ag in inorganic and organic acidic media

Tingting Song et al.

CRYSTENGCOMM (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dealloying by metallic melt

Takeshi Wada et al.

MATERIALS LETTERS (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Three-dimensional nanoporous gold for electrochemical supercapacitors

X. Y. Lang et al.

SCRIPTA MATERIALIA (2011)

添加到收藏夹

Article Chemistry, Physical

Computational simulation of the molecular structure of some triazoles as inhibitors for the corrosion of metal surface

Mohamed K. Awad et al.

JOURNAL OF MOLECULAR STRUCTURE-THEOCHEM (2010)

添加到收藏夹

Article Chemistry, Physical

Dealloying to nanoporous Au/Pt alloys and their structure sensitive electrocatalytic properties

Caixia Xu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2010)

添加到收藏夹

Review Chemistry, Multidisciplinary

Size matters: why nanomaterials are different

Emil Roduner

CHEMICAL SOCIETY REVIEWS (2006)

添加到收藏夹

Article Chemistry, Physical

A effect of sodium dodecylsulfate on the corrosion of copper in sulphuric acid media

R Fuchs-Godec et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2004)

添加到收藏夹

Article Physics, Multidisciplinary

Basic density-functional theory - an overview

U. von Barth

PHYSICA SCRIPTA (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoporous gold leaf: Ancient technology/advanced material

Y Ding et al.

ADVANCED MATERIALS (2004)

添加到收藏夹

Article Chemistry, Physical

Controlling synthesis of silver nanowires and dendrites in mixed surfactant solutions

XW Zheng et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)

添加到收藏夹

Article Multidisciplinary Sciences

Evolution of nanoporosity in dealloying

J Erlebacher et al.

NATURE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.