Latest insights on technologies for the treatment of solid medical waste: A review

Article Chemistry, Multidisciplinary

Waste Face Surgical Mask Transformation into Crude Oil and Nanostructured Electrocatalysts for Fuel Cells and Electrolyzers

Mohsin Muhyuddin et al.

Summary: A novel method of converting waste surgical masks into electrocatalysts and crude oil has been developed, opening up new pathways for waste valorization within the core of the circular economy.

CHEMSUSCHEM (2022)

添加到收藏夹

Article Environmental Sciences

Effect of biomedical waste co-feeding in the steam gasification of Indian palm kernel shell in fluidized bed gasifier

Pranesh Ganesan

Summary: This study investigates the co-feeding of biomedical waste with palm kernel shell for steam gasification, and the effects on gas yield, tar content, and carbon conversion efficiency. The results show that co-feeding can reduce the tar content and increase the carbon conversion efficiency.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

添加到收藏夹

Review Environmental Sciences

Medical waste: Current challenges and future opportunities for sustainable management

Narendra Singh et al.

Summary: Countries worldwide are struggling with the increasing medical waste generated by the COVID-19 pandemic. Studies show that there are challenges in medical waste management, and there is a need for stronger knowledge and awareness among workers on infection and injury prevention best practices. Sustainable management measures should be adopted to prevent catastrophic stockpiling of medical waste.

CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Review Environmental Sciences

Medical Waste from COVID-19 Pandemic-A Systematic Review ofManagement and Environmental Impacts in Australia

Lynda Andeobu et al.

Summary: The COVID-19 pandemic has led to a surge in medical waste worldwide, including in Australia, where large quantities of disposable items are disposed of daily. The establishment of quarantine facilities and centers in Australia has increased the risk of contamination and the mixing of general waste with medical waste. This study examines the management and disposal practices in Australia for COVID-19 medical waste and their impacts on public health and the environment.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

添加到收藏夹

Review Energy & Fuels

A comprehensive review of the application of plasma gasification technology in circumventing the medical waste in a post-COVID-19 scenario

Rajneesh Kaushal et al.

Summary: The recent COVID-19 pandemic has generated a significant amount of biomedical waste, requiring efficient treatment technology. Plasma gasification technology can effectively treat biomedical waste and utilize its byproducts as valuable inputs, in line with the concept of circular economy.

BIOMASS CONVERSION AND BIOREFINERY (2022)

添加到收藏夹

Article Development Studies

Circular economy adoption challenges in medical waste management for sustainable development: An empirical study

Jayakrishna Kandasamy et al.

Summary: This study examines the challenges of implementing circular economy in medical waste management, with a focus on reprocessing difficulty and transportation infrastructure inadequacy as the most significant challenges. Using a questionnaire survey and factor analysis, the researchers identify the main challenges and prioritize them. The findings of this study can guide organizations in adopting circular economy practices for sustainable development in medical waste management.

SUSTAINABLE DEVELOPMENT (2022)

添加到收藏夹

Article Thermodynamics

Performance assessment of a novel medical-waste-to-energy design based on plasma gasification and integrated with a municipal solid waste incineration plant

Heng Chen et al.

Summary: The article introduces a novel energy design that combines medical waste gasification with municipal solid waste incineration. Through energy analysis, exergy analysis, and economic analysis, the efficiency, feasibility, and advantages of the design are verified.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Thermochemical treatment of daily COVID-19 single-use facemask waste: Power generation potential and environmental impact analysis

Dan Cudjoe et al.

Summary: This study evaluates the power generation potential and environmental impact of treating single-use facemask waste through incineration. The findings show that Asia and Africa produce a large amount of daily single-use facemask waste, but incineration can generate electricity while also emitting greenhouse and acid gases.

ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Life cycle assessment of biomedical waste management for reduced environmental impacts

Anurag Deepak et al.

Summary: This paper addresses the environmental burden of existing biomedical waste management in northern India and suggests constructive steps to achieve a less impactful environment through Life Cycle Assessment (LCA). The study finds that an integrated system including incineration with energy recovery, autoclave-shredder, chemical disinfection, and Effluent Treatment Plant (ETP) reduces the environmental burden compared to the present state. The paper suggests that LCA is a beneficial tool for decision-makers and managers to reduce environmental burden and develop a life cycle inventory database for developed economies.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Environmental Sciences

Principal of environmental life cycle assessment for medical waste during COVID-19 outbreak to support sustainable development goals

Ashkan Nabavi-Pelesaraei et al.

Summary: The disposal of medical waste is crucial in preventing the spread of pandemics like COVID-19. With the increase in generation of medical waste, a structured evaluation is needed to quantify its potential environmental impacts and support sustainable development goals. Life cycle assessment (LCA) is a practical approach for examining the environmental impacts of waste disposal processes. This research investigates the management of COVID-19 medical waste (CMW) through LCA, using the most up-to-date methodology (ReCiPe2016) to compute environmental damages. The study concludes that LCA is an effective method for evaluating the environmental burden of CMW management scenarios in critical conditions, supporting sustainable development goals.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Review Environmental Sciences

A review on emergency disposal and management of medical waste during the COVID-19 pandemic in China

Hailong Zhao et al.

Summary: The surge of medical waste during the COVID-19 pandemic has exceeded the disposal capacity of existing facilities. This review presents the current status of medical waste generation and disposal in China, and analyzes the characteristics and applicability of emergency disposal technologies.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Chemistry, Applied

Plasma gasification versus incineration of plastic waste: Energy, economic and environmental analysis

Dan Cudjoe et al.

Summary: This study compares the electricity generation potential, economic feasibility, and environmental performance of plasma gasification and incineration for mixed plastic waste treatment in China. The results show that plasma gasification has higher power generation potential, economic feasibility, and lower environmental impact compared to incineration.

FUEL PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Environmental

Study on the process of medical waste disinfection by microwave technology

Jie Liu et al.

Summary: Microwave sterilization technology is a fast, efficient, and environmentally friendly method for treating medical waste. By optimizing the process parameters, it is possible to achieve good sterilization results.

WASTE MANAGEMENT (2022)

添加到收藏夹

Article Environmental Sciences

Collaborative Reverse Logistics Network for Infectious Medical Waste Management during the COVID-19 Outbreak

Xuan Luo et al.

Summary: This study introduces the application of mobile processing centers (MPCs) in the reverse logistics network for infectious medical waste (IMW). By establishing a collaborative location and routing optimization model, it demonstrates good performance in supporting government decision-making for IMW management in pandemic prevention and control.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

添加到收藏夹

Article Environmental Sciences

Green reverse logistics network design for medical waste management: A circular economy transition through case approach

Kannan Govindan et al.

Summary: Proper management of medical waste is crucial for environmental protection and public health. This paper introduces a novel circular economy transition model for medical waste management, aiming to minimize cost and population risk by optimizing the uncertainty in waste generation and treatment.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainable Development Solutions for the Medical Waste Problem Using Thermal Plasmas

Ahmed Rida Galaly

Summary: This paper investigates the thermodynamic properties of air plasma torches for energy recovery from medical waste and proposes the sale profits of diesel oil and pyrolysis oil in a medical waste treatment project in Makkah.

SUSTAINABILITY (2022)

添加到收藏夹

Article Energy & Fuels

Kinetic study on high-temperature gasification of medical plastic waste coupled with hydrogen-rich syngas production catalyzed by steel-converter ash

Linbo Qin et al.

Summary: By using converter ash as a catalyst, the gasification of medical plastic waste can be promoted, resulting in the production of hydrogen-rich syngas. The synergistic catalytic effect of Fe2O3 and CaO in the converter ash plays a significant role in generating hydrogen-rich syngas. Additionally, the converter ash has a catalytic effect on the formation of H-2, CO, and CH4. However, steam does not have a significant impact on the reaction mechanism during the CO2 gasification of medical plastic waste.

JOURNAL OF THE ENERGY INSTITUTE (2022)

添加到收藏夹

Article Engineering, Civil

Implementation of a Degassing System at the MSW Landfill

Anna Shkileva

Summary: The Aitolo-Akarnania prefecture in western Greece is prone to strong earthquakes and large active fault systems. The degradation of the environment due to anthropogenic pollution caused by industrial and agricultural growth, urban expansion, population increase, and consumption levels indicates a looming environmental crisis on a global scale. The increase in solid household waste, overcrowded and smoking landfills, and unauthorized dumps are major sources of environmental pollution, calling for urgent and comprehensive solutions.

CIVIL ENGINEERING JOURNAL-TEHRAN (2021)

添加到收藏夹

Review Engineering, Chemical

Thermal Plasma Treatment of Medical Waste

Xiaowei Cai et al.

Summary: The traditional thermal technology for processing medical waste poses risks of secondary pollution, while thermal plasma technologies are gaining attention due to advantages such as high temperature, lower pollutant emissions, and smaller installation size, especially in cases of a sudden increase in medical waste.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Selection of the best healthcare waste disposal techniques during and post COVID-19 pandemic era

Vijaya Kumar Manupati et al.

Summary: This study proposed an assessment framework based on socio-technical and triple bottom line perspectives for selecting the best healthcare waste disposal technique. The findings suggest that incineration is the optimal waste disposal method, but also highlight environmental concerns.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Engineering, Environmental

Pyrolysis dynamics of two medical plastic wastes: Drivers, behaviors, evolved gases, reaction mechanisms, and pathways

Ziyi Ding et al.

Summary: This study characterized the pyrolysis process of medical plastic wastes through TG-FTIR and Py-GC/MS analyses, finding that medical bottles showed better pyrolysis performance with lower residue content.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Article Thermodynamics

Techno-economic assessment of a conceptual waste-to-energy CHP system combining plasma gasification, SOFC, gas turbine and supercritical CO2 cycle

Weike Peng et al.

Summary: A novel system utilizing plasma gasification to convert medical waste into syngas for energy production, combined with solid oxide fuel cells and a gas turbine, enhanced by a supercritical CO2 cycle. This hybrid system not only generates power, but also utilizes waste heat to provide domestic hot water for residents, showing significant economic benefits.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Environmental Sciences

Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges*

Guangcan Su et al.

Summary: The COVID-19 pandemic has posed significant challenges to the management of medical wastes, but pyrolysis technology shows promise in addressing this issue by converting medical wastes into valuable bio-products.

ENVIRONMENTAL POLLUTION (2021)

添加到收藏夹

Article Environmental Sciences

Energy, environment and economy assessment of medical waste disposal technologies in China

Hai-Long Zhao et al.

Summary: This study evaluated and compared five medical waste (MW) disposal technologies. Steam and microwave sterilization + incineration showed the highest energy recovery efficiencies, while plasma melting had the lowest. Microwave sterilization + landfill outperformed in terms of life cycle assessment, while plasma melting exhibited the worst performance.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Engineering, Environmental

Repercussions of COVID-19 pandemic on solid waste generation and management strategies

Yangyang Liang et al.

Summary: The study reviews the impact of the COVID-19 pandemic on medical waste, personal protection equipment waste, and municipal solid waste, highlighting the significant increase in medical waste generation. In response to the pandemic, international organizations and countries have issued new policies and guidelines for waste management. Challenges such as disposal capacity for medical waste, plastic reduction policies, and waste recycling have emerged globally during the pandemic.

FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Information Systems

Design Thinking as a Framework for the Design of a Sustainable Waste Sterilization System: The Case of Piedmont Region, Italy

Ivonne Angelica Castiblanco Jimenez et al.

Summary: The development of new waste disposal methods is crucial for eco-friendly cities, with waste management being no exception. This research explores a more ecological and sustainable solution for infectious waste treatment in Northern Italy, aiming to improve the population's quality of life. By utilizing Design Thinking, feasible results based on user needs can be obtained, contributing to the creation of better cities for all.

ELECTRONICS (2021)

添加到收藏夹

Article Engineering, Environmental

Plasma vitrification and heavy metals solidification of MSW and sewage sludge incineration fly ash

Wenchao Ma et al.

Summary: Thermal plasma treatment is a promising method for fly ash disposal. Experimental results show that the formation temperature of vitrified slag can be reduced during co-treatment, and the CaO content in raw materials is related to the volatilization of Cd and Pb. A high Al2O3 content is beneficial for retaining Cr, Cu, and Ni in slags.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Review Engineering, Environmental

Technological review on thermochemical conversion of COVID-19-related medical wastes

Chandra Wahyu Purnomo et al.

Summary: The COVID-19 pandemic has resulted in a significant increase in medical waste, requiring urgent waste management measures. This study examines the thermochemical treatment and conversion potential of COVID-19 related medical waste to fuels, including methods such as incineration, gasification, and pyrolysis. The selection of methods should be based on energy efficiency and environmental impact considerations.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Engineering, Environmental

Comparative life cycle assessment of emergency disposal scenarios for medical waste during the COVID-19 pandemic in China

Hailong Zhao et al.

Summary: The COVID-19 pandemic has led to a significant increase in medical waste generation globally, requiring urgent disposal and management measures. Quantitative assessment of different disposal scenarios indicates that co-incineration with municipal solid waste shows promising environmental benefits for handling medical waste.

WASTE MANAGEMENT (2021)

添加到收藏夹

Review Thermodynamics

Modern Technologies for the Thermal Treatment of Municipal Solid Waste, and Prospects for Their Implementation in Russia

A. N. Tugov

Summary: The best technology for energy-producing MSW utilization involves mechanical shearing fire-grates in layered furnaces, solving environmental issues. In Russia, despite limited experience, plans are in place to construct four large thermal power plants in Moscow oblast to incinerate 700000 t of solid waste annually. A promising project in Russia is the TPP with an electric operating capacity of 24 MW for the energy-producing utilization of 360000 t of MSW annually, with potential for application in over two dozen large Russian cities.

THERMAL ENGINEERING (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: A review

Junjie Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Environmental Sciences

Establishing an interval-valued fuzzy decision-making method for sustainable selection of healthcare waste treatment technologies in the emerging economies

Hao Li et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Study on pyrolysis products characteristics of medical waste and fractional condensation of the pyrolysis oil

Shuqi Fang et al.

ENERGY (2020)

添加到收藏夹

Review Environmental Sciences

Carbonization: A feasible route for reutilization of plastic wastes

Shuiliang Chen et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

添加到收藏夹

Review Engineering, Environmental

Technologies for chemical recycling of household plastics - A technical review and TRL assessment

Martyna Solis et al.

WASTE MANAGEMENT (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hydrogen production from waste gasification followed by membrane filtration: a review

Majid Saidi et al.

ENVIRONMENTAL CHEMISTRY LETTERS (2020)

添加到收藏夹

Review Environmental Sciences

Disinfection technology of hospital wastes and wastewater: Suggestions for disinfection strategy during coronavirus Disease 2019 (COVID-19) pandemic in China

Jiao Wang et al.

ENVIRONMENTAL POLLUTION (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19

Jiri Jaromir Klemes et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

添加到收藏夹

Article Environmental Sciences

Disinfection technology and strategies for COVID-19 hospital and bio-medical waste management

Sadia Ilyas et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

添加到收藏夹

Review Chemistry, Physical

Biomedical Waste Management by Using Nanophotocatalysts: The Need for New Options

Sara Hooshmand et al.

MATERIALS (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

A novel assessment of bio-medical waste disposal methods using integrating weighting approach and hesitant fuzzy MOOSRA

S. Narayanamoorthy et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Environmental Sciences

Towards Climate Resilient and Environmentally Sustainable Health Care Facilities

Carlos Corvalan et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2020)

添加到收藏夹

Proceedings Paper Agricultural Engineering

Comparison and analysis of several medical waste treatment technologies

Lufeng Xu et al.

2020 INTERNATIONAL CONFERENCE ON GREEN DEVELOPMENT AND ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Review Thermodynamics

Progress in waste utilization via thermal plasma

Vineet Singh Sikarwar et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)

添加到收藏夹

Article Chemistry, Applied

Treatment of medical solid waste using an Air Flow controlled incinerator

Van Tuyen Trinh et al.

POLISH JOURNAL OF CHEMICAL TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Environmental

COVID-19: Environment concern and impact of Indian medicinal system

Vijay Kumar et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Treatment of landfill leachates with biological pretreatments and reverse osmosis

Izabela Anna Talalaj et al.

ENVIRONMENTAL CHEMISTRY LETTERS (2019)

添加到收藏夹

Review Environmental Sciences

The detoxification of heavy metals from aqueous environment using nano-photocatalysis approach: a review

Muhammad Bilal Tahir et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Application of multi-criteria-decision approach for the analysis of medical waste management systems in Myanmar

Thiri Shwesin Aung et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Thermodynamics

Influence of mixed-use neighborhood developments on the performance of waste-to-energy CHP plant

Kuljeet Singh et al.

ENERGY (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Plasma gasification of municipal solid waste for waste-to-value processing

M. T. Munir et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Hazardous waste incineration in a rotary kiln: a review

Xuguang Jiang et al.

WASTE DISPOSAL & SUSTAINABLE ENERGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Life-cycle environmental and economic assessment of medical waste treatment

Jingmin Hong et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Co-gasification and recent developments on waste-to-energy conversion: A review

Ana Ramos et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Engineering, Environmental

Processing of biomedical waste in plasma gasifier

V. E. Messerle et al.

WASTE MANAGEMENT (2018)

添加到收藏夹

Review Engineering, Chemical

Characteristics and Treatment Methods of Medical Waste Incinerator Fly Ash: A Review

Fang Liu et al.

PROCESSES (2018)

添加到收藏夹

Article Public, Environmental & Occupational Health

Assessment of Healthcare Waste Management Paradigms and Its Suitable Treatment Alternative: A Case Study

Mohammad Mehedi Hasan et al.

JOURNAL OF ENVIRONMENTAL AND PUBLIC HEALTH (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Small Scale Gasification Application and Perspectives in Circular Economy

Maris Klavins et al.

ENVIRONMENTAL AND CLIMATE TECHNOLOGIES (2018)

添加到收藏夹

Review Medicine, General & Internal

Biomedical waste management in India: Critical appraisal

Priya Datta et al.

JOURNAL OF LABORATORY PHYSICIANS (2018)

添加到收藏夹

Article Thermodynamics

Hydrothermal carbonization of medical wastes and lignocellulosic biomass for solid fuel production from lab-scale to pilot-scale

Yafei Shen et al.

ENERGY (2017)

添加到收藏夹

Article Biochemistry & Molecular Biology

Microbial Enzymatic Degradation of Biodegradable Plastics

Roohi et al.

CURRENT PHARMACEUTICAL BIOTECHNOLOGY (2017)

添加到收藏夹

Review Immunology

Current Perspectives on Biomedical Waste Management: Rules, Conventions and Treatment Technologies

Malini R. Capoor et al.

INDIAN JOURNAL OF MEDICAL MICROBIOLOGY (2017)

添加到收藏夹

Article Construction & Building Technology

Compressive strength and heavy metal leaching of concrete containing medical waste incineration ash

Aylin Akyildiz et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Techno-economic and life cycle assessment on lignocellulosic biomass thermochemical conversion technologies: A review

Madhumita Patel et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Engineering, Environmental

Comparison of steam sterilization conditions efficiency in the treatment of Infectious Health Care Waste

Olivia Maamari et al.

WASTE MANAGEMENT (2016)

添加到收藏夹

Article Engineering, Environmental

Technology selection for infectious medical waste treatment using the analytic hierarchy process

Evangelos A. Voudrias

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2016)

添加到收藏夹

Letter Public, Environmental & Occupational Health

Pitfalls of cleaning controls in ultrasonic washers

Alberto Di Blasio et al.

AMERICAN JOURNAL OF INFECTION CONTROL (2015)

添加到收藏夹

Article Public, Environmental & Occupational Health

Disinfecting personal protective equipment with pulsed xenon ultraviolet as a risk mitigation strategy for health care workers

Chetan Jinadatha et al.

AMERICAN JOURNAL OF INFECTION CONTROL (2015)

添加到收藏夹

Article Thermodynamics

New energy value chain through pyrolysis of hospital plastic waste

Maria Paraschiv et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Engineering, Chemical

FORMATION OF DIOXINS AND FURANS DURING MUNICIPAL SOLID WASTE GASIFICATION

E. J. Lopes et al.

BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2015)

添加到收藏夹

Review Environmental Sciences

Medical waste management - A review

Elliott Steen Windfeld et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Evaluating health-care waste treatment technologies using a hybrid multi-criteria decision making model

Hu-Chen Liu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Article Engineering, Environmental

Removal of toxic and alkali/alkaline earth metals during co-thermal treatment of two types of MSWI fly ashes in China

Jie Yu et al.

WASTE MANAGEMENT (2015)

添加到收藏夹

Article Engineering, Environmental

Sustainability and shared smart and mutual - green growth (SSaM-GG) in Korean medical waste management

Ja-Kong Koo et al.

WASTE MANAGEMENT & RESEARCH (2015)

添加到收藏夹

Article Environmental Sciences

Advantages and Disadvantages of Healthcare Waste Treatment and Disposal Alternatives: Malaysian Scenario

Maryam Khadem Ghasemi et al.

POLISH JOURNAL OF ENVIRONMENTAL STUDIES (2015)

添加到收藏夹

Article Chemistry, Analytical

Reverse polymerization of waste polystyrene through microwave assisted pyrolysis

Andrea Undri et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Phosphate modified calcium aluminate cement for radioactive waste encapsulation

P. Swift et al.

ADVANCES IN APPLIED CERAMICS (2013)

添加到收藏夹

Review Agricultural Engineering

A review of cleaning technologies for biomass-derived syngas

Patrick J. Woolcock et al.

BIOMASS & BIOENERGY (2013)

添加到收藏夹

Article Energy & Fuels

Ultimate and Proximate Correlations for Estimating the Higher Heating Value of Hydrothermal Solids

Stefan Kieseler et al.

ENERGY & FUELS (2013)

添加到收藏夹

Review Green & Sustainable Science & Technology

The crucial role of Waste-to-Energy technologies in enhanced landfill mining: a technology review

A. Bosmans et al.

JOURNAL OF CLEANER PRODUCTION (2013)

添加到收藏夹

Review Engineering, Environmental

Applications of life cycle assessment and cost analysis in health care waste management

Sebastiao Roberto Soares et al.

WASTE MANAGEMENT (2013)

添加到收藏夹

Article Engineering, Environmental

Assessment of health-care waste disposal methods using a VIKOR-based fuzzy multi-criteria decision making method

Hu-Chen Liu et al.

WASTE MANAGEMENT (2013)

添加到收藏夹

Article Engineering, Environmental

Application countermeasures of non-incineration technologies for medical waste treatment in China

Yang Chen et al.

WASTE MANAGEMENT & RESEARCH (2013)

添加到收藏夹

Article Engineering, Environmental

Evaluation of healthcare waste treatment/disposal alternatives by using multi-criteria decision-making techniques

Aysun Ozkan

WASTE MANAGEMENT & RESEARCH (2013)

添加到收藏夹

Review Environmental Sciences

Waste Gasification by Thermal Plasma: A Review

Frederic Fabry et al.

WASTE AND BIOMASS VALORIZATION (2013)

添加到收藏夹

Proceedings Paper Energy & Fuels

The General Process of Medical Waste High Temperature Steam Sterilization Treatment Technology

Zhenbo Bao et al.

ENVIRONMENTAL PROTECTION AND RESOURCES EXPLOITATION, PTS 1-3 (2013)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review on bio-oil production from biomass by using pyrolysis method

Wan Nor Roslam Wan Isahak et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

添加到收藏夹

Review Biotechnology & Applied Microbiology

A review of torrefaction for bioenergy feedstock production

Daniel Ciolkosz et al.

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2011)

添加到收藏夹

Article Energy & Fuels

Variations in the Design of Dual Fluidized Bed Gasifiers and the Quality of Syngas from Biomass

C. Srinivasakannan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2011)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A fuzzy multi-criteria group decision making framework for evaluating health-care waste disposal alternatives

Mehtap Dursun et al.

EXPERT SYSTEMS WITH APPLICATIONS (2011)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review and analysis of biomass gasification models

Maria Puig-Arnavat et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

添加到收藏夹

Review Thermodynamics

The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals

S. M. Al-Salem et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)

添加到收藏夹

Article Thermodynamics

Thermodynamic comparison of the FICFB and Viking gasification concepts

Martin Gassner et al.

ENERGY (2009)

添加到收藏夹

Article Engineering, Environmental

Comparative life cycle assessments of incineration and non-incineration treatments for medical waste

Wei Zhao et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2009)

添加到收藏夹

Review Environmental Sciences

Recent developments in Life Cycle Assessment

Goran Finnveden et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2009)

添加到收藏夹

Article Engineering, Environmental

Hospital medical waste management in Shandong Province, China

Ruoyan Gai et al.

WASTE MANAGEMENT & RESEARCH (2009)

添加到收藏夹

Review Physics, Applied

Thermal plasma waste treatment

Joachim Heberlein et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)

添加到收藏夹

Article Engineering, Environmental

Energy recovery from municipal waste: A case study for a middle-sized Italian district

M. Giugliano et al.

WASTE MANAGEMENT (2008)

添加到收藏夹

Article Engineering, Environmental

Encapsulation behaviors of metals in slags containing various amorphous volume fractions

Yi-Ming Kuo et al.

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2007)

添加到收藏夹

Article Engineering, Environmental

Life cycle assessment of a pyrolysis/gasification plant for hazardous paint waste

Robert Jan Saft

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2007)

添加到收藏夹

Article Engineering, Environmental

Treatment and disposal alternatives for health-care waste in developing countries -: a case study in Istanbul, Turkey

B. Aylin Zeren Alagoz et al.

WASTE MANAGEMENT & RESEARCH (2007)

添加到收藏夹

Article Engineering, Environmental

Assessment of medical wastes management practice: A case study of the northern part of Jordan

A. Bdour et al.

WASTE MANAGEMENT (2007)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Destruction of spores on building decontamination residue in a commercial autoclave

P. Lemieux et al.

APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2006)

添加到收藏夹

Review Physics, Applied

Plasma assisted ignition and combustion

S. M. Starikovskaia

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)

添加到收藏夹

Article Engineering, Environmental

Alternatives for the treatment and disposal of healthcare wastes in developing countries

LF Diaz et al.

WASTE MANAGEMENT (2005)

添加到收藏夹

Article Physics, Applied

Experimental and numerical investigations of a plasma reactor for the thermal destruction of medical waste using a model substance

J Fiedler et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2004)

添加到收藏夹

Article Engineering, Environmental

Alternatives for treatment and disposal cost reduction of regulated medical wastes

BK Lee et al.

WASTE MANAGEMENT (2004)

添加到收藏夹

Article Environmental Sciences

Disinfection of surfaces by photocatalytic oxidation with titanium dioxide and UVA light

KP Kühn et al.

CHEMOSPHERE (2003)

添加到收藏夹

Article Engineering, Environmental

Energy from gasification of solid wastes

V Belgiorno et al.

WASTE MANAGEMENT (2003)

添加到收藏夹

Article Energy & Fuels

Co-gasification study of biomass mixed with plastic wastes

F Pinto et al.

FUEL (2002)

添加到收藏夹

Article Engineering, Environmental

Experimental aspects of mechanistic studies on aqueous ozone decomposition in alkaline solution

A Nemes et al.

OZONE-SCIENCE & ENGINEERING (2000)

添加到收藏夹

Article Thermodynamics

Ozone solubilities in water and aqueous salt solutions

E Rischbieter et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2000)

添加到收藏夹

Latest insights on technologies for the treatment of solid medical waste: A review

相关参考文献

导出引文

分享论文