☆ 4.8 Article

Crystallization manipulation and holistic defect passivation toward stable and efficient inverted perovskite solar cells

ENERGY & ENVIRONMENTAL SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

David P. McMeekin et al.

Summary: Achieving long-term stability is the key challenge for widespread commercialization of perovskite solar cells. This study introduces a high-temperature dimethyl-sulfoxide-free processing method to control the crystallization of perovskite films, effectively improving the material quality and operational stability of the devices. The encapsulated devices showed improved lifetimes, with a median T80 of 1,190 hours and a champion device reaching a T80 of 1,410 hours.

NATURE MATERIALS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stabilizing Buried Interface via Synergistic Effect of Fluorine and Sulfonyl Functional Groups Toward Efficient and Stable Perovskite Solar Cells

Cheng Gong et al.

Summary: The interfacial defects and energy barrier are the main reasons for interfacial nonradiative recombination. Additionally, poor perovskite crystallization and incomplete conversion of PbI2 to perovskite limit the enhancement of photovoltaic performance in devices using sequential deposition. A strategy of buried interface stabilization, involving the synergy of fluorine (F) and sulfonyl (S=O) functional groups, is proposed. Chemical bonds including hydrogen, coordination, and ionic bonds are formed to enhance interfacial contact and defect passivation. The chemical interaction between modifier molecules and perovskite, as well as SnO2, increases with the augmentation of S=O and F groups, leading to improved defect passivation and crystallization kinetics.

NANO-MICRO LETTERS (2023)

添加到收藏夹

Article Chemistry, Applied

Bottom-up holistic carrier management strategy induced synergistically by multiple chemical bonds to minimize energy losses for efficient and stable perovskite solar cells

Baibai Liu et al.

Summary: A bottom-up holistic carrier management strategy is proposed in this study to minimize bulk and interfacial energy losses for high-performance perovskite photovoltaics, induced synergistically by multiple chemical bonds.

JOURNAL OF ENERGY CHEMISTRY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simultaneous Interfacial Modification and Crystallization Control by Biguanide Hydrochloride for Stable Perovskite Solar Cells with PCE of 24.4%

Zhuang Xiong et al.

Summary: In this study, a multifunctional interfacial material, BGCl, was introduced to modify the interface of perovskite solar cells. The BGCl improved electron extraction and crystal growth of perovskite by chemically linking to SnO2 and anchoring PbI2. This modification led to better energetic alignment, reduced interfacial defects, and homogeneous perovskite crystallites, resulting in highly efficient and stable performance.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells

Xiaodong Li et al.

Summary: A stable perovskite heterojunction was achieved in inverted solar cells by sulfidating the surface of lead-rich perovskite films, resulting in improved power conversion efficiency and open-circuit voltage.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Environmental-Friendly Polymer for Efficient and Stable Inverted Perovskite Solar Cells with Mitigating Lead Leakage

Qi Cao et al.

Summary: The successful implantation of the environmentally friendly polymer PBAT into perovskite film improves the operational stability and charge carrier transport of perovskite solar cells. It also effectively prevents lead ions and iodine defects, leading to enhanced conversion efficiencies and operational stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Manipulating Crystallization Kinetics in High-Performance Blade-Coated Perovskite Solar Cells via Cosolvent-Assisted Phase Transition

Qiong Liang et al.

Summary: By incorporating ethyl alcohol (EtOH) into perovskite ink, a facile and effective strategy for fabricating high-performance room-temperature blade-coated perovskite solar cells and modules is demonstrated in this work. Real-time perovskite crystallization studies reveal the structural evolutions and phase-transition pathway. The strategy efficiently suppresses nonradiative recombination and improves device efficiency and stability.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Optics

Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells

Hao Chen et al.

Summary: The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width. In this study, a method to increase the layer width of RDPs in 2D/3D heterostructures is reported to address electron blocking at the interface. This method allows for the development of efficient inverted perovskite solar cells with high stability.

NATURE PHOTONICS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Efficient, stable formamidinium-cesium perovskite solar cells and minimodules enabled by crystallization regulation

Yiming Li et al.

Summary: Researchers have developed a dual-functional additive that can regulate the crystallization and defects of FA-Cs perovskite film, resulting in improved efficiency and stability of perovskite solar cells.

JOULE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revealing Steric-Hindrance-Dependent Buried Interface Defect Passivation Mechanism in Efficient and Stable Perovskite Solar Cells with Mitigated Tensile Stress

Qian Zhou et al.

Summary: In this study, a novel and effective steric-hindrance-dependent buried interface defect passivation and stress release strategy is reported, which utilizes adamantane derivative molecules to modify the SnO2/perovskite interface. The experimental and theoretical results confirm the steric-hindrance-dependent defect passivation effect and interfacial chemical interaction strength. The device performance is enhanced by mitigating interfacial strain and passivating interfacial defects. The ADAA-modified device achieves an impressive efficiency of 23.18%.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dopant-Free Phthalocyanine Hole Conductor with Thermal-Induced Holistic Passivation for Stable Perovskite Solar Cells with 23% Efficiency

Geping Qu et al.

Summary: Simultaneous passivation of surface and grain boundary defects in perovskite films is crucial for efficient and stable perovskite solar cells. This study demonstrates the use of a dopant-free hole transport material to effectively passivate the defects in perovskite films through thermal-induced molecular diffusion. The resulting devices exhibit excellent efficiency and stability, highlighting the potential of phthalocyanine-based dopant-free hole transport materials and defect passivation strategies for developing highly efficient and stable perovskite solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controllable Heterogenous Seeding-Induced Crystallization for High-Efficiency FAPbI3-Based Perovskite Solar Cells Over 24%

Hengkai Zhang et al.

Summary: A new strategy of heterogeneous seeding-induced crystallization (hetero-SiC) is proposed in this study to assist the growth of FAPbI(3)-based perovskite, which significantly improves film quality, reduces defects, and enhances stability under light illumination. The hetero-SiC process leads to outstanding performance in perovskite solar cells, with a power conversion efficiency of 24.0% and retention of 84% of initial performance after 1400 h of light illumination.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stabilizing Perovskite Precursor by Synergy of Functional Groups for NiOx-Based Inverted Solar Cells with 23.5 % Efficiency

Mengjia Li et al.

Summary: In this study, a new precursor stabilization strategy for perovskite solar cells is reported, in which 3-hydrazinobenzoic acid is used as a stabilizer to effectively inhibit solution degradation. The functional groups of the stabilizer synergistically suppress the major reactions causing degradation, leading to improved efficiency and operational stability of inverted devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells

Tiankai Zhang et al.

Summary: This study proposes a new doping strategy for perovskite solar cells, using stable organic radicals as dopants and ionic salts as doping modulators. The strategy improves the performance and stability of the devices and could inspire further optimization in other optoelectronic devices.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Surface reaction for efficient and stable inverted perovskite solar cells

Qi Jiang et al.

Summary: In this study, a reactive surface engineering approach was used to enhance the performance of perovskite solar cells with an inverted structure. The resulting p-i-n solar cells showed a high power conversion efficiency of over 25% and remained stable after long-term operation under extreme conditions.

NATURE (2022)

添加到收藏夹

Article Chemistry, Physical

Tailoring multifunctional anion modifiers to modulate interfacial chemical interactions for efficient and stable perovskite solar cells

Qixin Zhuang et al.

Summary: In this paper, a universal anion modification strategy is reported to enhance the photovoltaic performance of perovskite solar cells (PSCs) by introducing a series of guanidinium salts with different anions at the perovskite/SnO2 interface. The modification strategy improves the interfacial energy band alignment, promotes crystallization, and enhances the thermal and ambient stabilities of the devices.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable perovskite solar cells with 25.17% efficiency enabled by improving crystallization and passivating defects synergistically

Yihui Wu et al.

Summary: The introduction of a new material, APC, has improved the performance of perovskite solar cells by enhancing the photoluminescence lifetime and carrier diffusion length, ultimately achieving high efficiency and stability.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Deep defect passivation and shallow vacancy repair via an ionic silicone polymer toward highly stable inverted perovskite solar cells

Tong Wang et al.

Summary: Additive engineering is an effective strategy to improve the performance of perovskite solar cells (PSCs). In this study, a novel ionic silicone polymer (PECL) was designed as an additive to passivate deep and shallow defects in inverted PSCs. The correlation between additives with different functional groups and device performance was quantitatively revealed. The PECL-modified inverted PSCs showed improved power conversion efficiency and stability.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Roles of MACl in Sequentially Deposited Bromine-Free Perovskite Absorbers for Efficient Solar Cells

Feihong Ye et al.

Summary: This study systematically investigated the role of MACl in sequentially deposited Br-free FA-based perovskites, revealing that MACl can regulate the reaction, phase transition, and crystallization. Compared to traditional FAPbI(3), perovskites with MACl exhibit superior performance in terms of grain size, carrier lifetime, and trap density.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering

Yawen Huang et al.

Summary: Scientists successfully optimized the secondary crystallization process of 2D perovskite through multifunctional interface engineering, achieving efficient and stable solar cells with high conversion efficiency, which could retain high efficiency even after long-term storage under ambient conditions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic Tetrabutylammonium Cation Intercalation to Heal Inorganic CsPbI3 Perovskite

Xiaomin Liu et al.

Summary: Intercalation of TBA cation into CsPbI3 to form TBAPbI(3) protective layer helps to heal defects, resulting in enhanced stability and efficiency of perovskite solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency

Lihua Zhu et al.

Summary: Nonradiative recombination losses caused by trap states at the surface and grain boundaries hinder the enhancement of power conversion efficiency and stability in perovskite solar cells. The introduction of 11MA additive successfully improves crystallinity, reduces trap state density, and inhibits ion migration, leading to simultaneous improvement in efficiency and stability. The device with 11MA additive achieves significantly higher PCE and maintains a high level of efficiency after aging for 3000 hours under ambient conditions.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Strain analysis and engineering in halide perovskite photovoltaics

Dongtao Liu et al.

Summary: Halide perovskites are a promising candidate for clean-energy technologies due to their low cost and excellent semiconductor properties, but challenges with device efficiency and stability persist. Recent advancements have tackled the issue of strain in perovskites, showing improvements in both efficiency and stability of devices. Further research is needed to fully understand strain in halide perovskites and continue enhancing their performance.

NATURE MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Concurrent cationic and anionic perovskite defect passivation enables 27.4% perovskite/silicon tandems with suppression of halide segregation

Furkan H. Isikgor et al.

Summary: The use of molecules containing both electron-rich and electron-poor moieties, such as phenformin hydrochloride (PhenHCl), can improve stability and efficiency of perovskite/silicon tandem solar cells by satisfying the requirements of defect passivation and suppression of light-induced phase segregation.

JOULE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Depth-dependent defect manipulation in perovskites for high-performance solar cells

Yuzhuo Zhang et al.

Summary: A depth-dependent manipulation strategy is demonstrated to concurrently modulate the bulk and interfacial defects in perovskite films, resulting in improved efficiency of PSCs. This strategy provides new insights into spatial defect modulation and may open up promising ways for defect modulator design for highly efficient perovskite optoelectronic devices.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boosted charge extraction of NbOx-enveloped SnO2 nanocrystals enables 24% efficient planar perovskite solar cells

Ruihan Yuan et al.

Summary: In this study, low-temperature processed SnO2/NbOx nanocrystals were reported as efficient electron transport materials (ETMs) for planar perovskite solar cells (PSCs), achieving an impressive power conversion efficiency (PCE) of 24.01% with remarkable device stability. The NbOx layer passivates defects, promotes charge extraction, and improves perovskite film crystallinity, leading to enhanced device performance. This work provides a facile approach for low-temperature processed ETMs with boosted carrier extraction ability, offering excellent efficiency and stability for planar PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells

Qin Yao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Blading Phase-Pure Formamidinium-Alloyed Perovskites for High-Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Wu-Qiang Wu et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells

Jiangzhao Chen et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Microscopic Degradation in Formamidinium-Cesium Lead Iodide Perovskite Solar Cells under Operational Stressors

Nengxu Li et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency

Fengzhu Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Causes and Solutions of Recombination in Perovskite Solar Cells

Jiangzhao Chen et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Compositional Control in 2D Perovskites with Alternating Cations in the Interlayer Space for Photovoltaics with Efficiency over 18%

Tao Luo et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Nanoscale hybrid multidimensional perovskites with alternating cations for high performance photovoltaic

Hao Gu et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Interfacial Passivation for Perovskite Solar Cells: The Effects of the Functional Group in Phenethylammonium Iodide

Jing Zhuang et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Imperfections and their passivation in halide perovskite solar cells

Bo Chen et al.

CHEMICAL SOCIETY REVIEWS (2019)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Surface modification via self-assembling large cations for improved performance and modulated hysteresis of perovskite solar cells

Tongle Bu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of bidentate and tridentate additives on the photovoltaic performance and stability of perovskite solar cells

Jiangzhao Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach

Jin-Wook Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Entropic stabilization of mixed A-cation ABX(3) metal halide perovskites for high performance perovskite solar cells

Chenyi Yi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Michael Saliba et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance

Michael Saliba et al.

SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide

Namyoung Ahn et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Chemistry, Physical

Formamidinium and Cesium Hybridization for Photo- and Moisture-Stable Perovskite Solar Cell

Jin-Wook Lee et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.