☆ 4.2 Review

Review on sheet and tube forming at elevated temperature of third generation of high-strength steels & star;

MECHANICS & INDUSTRY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Numerical modelling of Direct Hot Tube Rotary Draw Bending of 22MnB5 High Strength Steel

Enrico Simonetto et al.

Summary: This paper proposes a method of manufacturing high strength steel tubular components using a high temperature rotary draw bending process, supported by a fully coupled thermo-mechanical-metallurgical numerical model. The model was experimentally validated and proved the optimization of material formability and achievement of the target microstructure, providing feasibility for manufacturing lightweight components.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Improve bendability of a Cr-alloyed press-hardening steel through an in-line quenching and non-isothermal partitioning process

Wei Ding et al.

Summary: This study developed a new hot stamping process with in-line quenching and non-isothermal partitioning to improve the bendability of a Cr-alloyed press-hardening steel. The experimental results showed significant improvements in bending angle and energy absorption.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Investigation of the effect of initial states of medium-Mn steel on deformation behaviour under hot stamping conditions

Chenpeng Tong et al.

Summary: This study investigates the effect of different initial states on the deformation behavior of Medium-Mn steel during low-temperature hot stamping. The results show that the hot rolled and annealed state exhibits the best hot deformation performance, while the cold-rolled and annealed state shows the poorest performance. The final mechanical properties, however, are similar among the three states.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Quenchability improvement and control simplification by ice mandrel in hot stamping of ultra-high strength steel hollow parts

Ali Talebi-Anaraki et al.

Summary: A hot stamping process using ice mandrel and resistance heating was developed to produce ultra-high strength steel hollow parts for automobiles, improving body weight reduction and collision safety. The ice mandrel inserted in the tube effectively prevented buckling and increased hardness after die quenching, simplifying the controlling process. This method utilizing ice mandrel with insulating papers is highly effective in producing ultra-high strength hollow products.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

High accuracy direct hot bending of hollow profiles

Enrico Simonetto et al.

Summary: This paper presents the potential of thermal assisted processing in manufacturing bent hollow profiles in multi-phase High Strength Steels and introduces a new process named DHRDB. The results show that DHRDB can overcome limitations of room temperature processing, ensuring high accuracy, nearly absent springback, and enhanced mechanical properties.

MANUFACTURING LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tailored tempering without die heating in hot stamping of ultra-high strength steel parts

Yuki Nakagawa et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evaluations of tensile properties as a function of austenitizing temperature and springback by V-bending testing in medium-Mn steels

Ae-Ryeong Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Engineering, Industrial

Multi-scale simulation for hot stamping quenching & partitioning process of high-strength steel

Zijian Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Experimental investigation of a new low-temperature hot stamping process for boron steels

M. Ganapathy et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Construction & Building Technology

Experimental and numerical investigations on residual stresses in hot-bent circular steel tube

Qinghua Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

添加到收藏夹

Article Engineering, Industrial

Combined hot stamping and Q&P processing with a hot air partitioning device

Bin Zhu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Numerical simulations and experiments on fabricating bend pipes by push bending with local induction-heating process

Xunzhong Guo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Industrial

The influence of process variables on the gas forming and press hardening of steel tubes

Alexander Paul et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Industrial

Hot stamping of boron steel sheets with tailored properties: A review

Marion Merklein et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Article Mathematics, Applied

Numerical modelling of the tailored tempering process applied to 22MnB5 sheets

B. T. Tang et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2014)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Development of three-dimensional hot bending and direct quench technology

Naoaki Shimada et al.

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 (2014)

添加到收藏夹

Article Engineering, Industrial

Hot forming of boron steels using heated and cooled tooling for tailored properties

R. George et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel

John G. Speer et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Industrial

Tailor die quenching in hot stamping for producing ultra-high strength steel formed parts having strength distribution

K. Mori et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.