4.7 Article

Electrospun polyethersulfone@MOF composite membranes for air cleaning and oil-water separation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Engineering, Chemical

Advances in metal organic framework (MOF)-Based membranes and adsorbents for lithium-ion extraction

Silvia Raggam et al.

Summary: Lithium plays a vital role in energy storage for the transition to renewable energy. Various cost-effective and environmentally friendly methods of obtaining Lithium from primary and secondary sources are discussed. The development of novel MOF-based technologies for Lithium-ion extraction from aqueous sources is highlighted, with a focus on synthesis methods and performance evaluation. MOF-based membranes and adsorbents show high selectivity for Lithium ions, but face challenges in terms of water stability and fabrication methods. Future research should address these issues for commercialization in the industry.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Engineering, Environmental

Underwater oleophobic-super hydrophilic strontium-MOF for efficient oil/water separation

Arvind Raj et al.

Summary: We report the use of Strontium Metal-Organic Framework (Sr-MOF) for oil-water separation. The Sr-MOF showed excellent separation performance with oil rejection rates above 99% for different oils, and it exhibited good reusability. This method provides an interesting platform for the application of MOFs in oil-water separation.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

MOF-based membranes for oil/water separation: Status, challenges, and prospects

Mohammad Awwad et al.

Summary: Oily wastewater has negative impacts on the environment, human health, and marine life. Scientists have been exploring innovative separation methods to address this issue, with metal-organic framework (MOF)-based membranes showing promise due to their high porosity, wettability, and surface area. This review assesses the recent advancements and potential of MOF-based membranes in oil/water separation, including preparation methods, physiochemical characteristics, separation mechanisms, membrane regeneration, and stability. It also identifies challenges, research gaps, and provides recommendations for future studies.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

Review Environmental Sciences

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Xiaoman Li et al.

Summary: MOF-derived catalysts are emerging as excellent precursors for optimizing performance in various AOPs by delicate design of structure/composition, with important advances in Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, and hybrid AOPs. The relationship between unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability has been clarified, providing insights for practical application in wastewater treatment.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Engineering, Environmental

Electrospun polyetherimide/zeolitic imidazolate framework nanofibrous membranes for enhanced air filtration performance under high temperature and high humidity conditions

Changzhe Zhou et al.

Summary: The study successfully fabricated PEI/ZIF-67 nanofibrous membranes with stable and efficient PM filtration performance under high temperature and humidity conditions. Adding ZIF-67 significantly increased the removal efficiency of PM2.5 and PM10 particles while maintaining stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Engineering, Environmental

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation

Haihao Peng et al.

Summary: The combination of MOFs with aerogels shows promise for environmental remediation, optimizing performance and enhancing practicality.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Review Engineering, Environmental

MOF/hydrogel composite-based adsorbents for water treatment: A review

Qingshan Miao et al.

Summary: This article mainly introduces the application of metal-organic frameworks (MOFs) materials in water treatment, and discusses the combining methods of MOFs and hydrogels and their pros and cons. Meanwhile, the performance of MOF/hydrogel composites in removing metal ions, organic dyes, and drug residue molecules is reviewed, and the structure-performance relationship of MOF/hydrogels synthesized via different routes is analyzed. Finally, challenges and outlooks regarding the green synthesis, stability, and computational design of MOF/hydrogel composites are briefly discussed.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Article Multidisciplinary Sciences

Fabrication of a biological metal-organic framework based superhydrophobic textile fabric for efficient oil/water separation

M. E. Mohamed et al.

Summary: In this study, a cost-effective and environmentally friendly superhydrophobic textile fabric was developed for effective separation of oil-water mixtures and emulsions. The fabric, modified with a biological metal-organic framework and stearic acid, showed excellent wettability and separation performance.

SCIENTIFIC REPORTS (2022)

Article Engineering, Environmental

Metal-organic framework membranes: Recent development in the synthesis strategies and their application in oil-water separation

Yuying Deng et al.

Summary: Metal organic frameworks (MOFs) have attracted increasing attention for their large specific surface area and good thermal and chemical stability. Researchers have focused on the preparation of MOF membranes based on the excellent properties of MOFs, which have been widely used in separation, catalysis, and water treatment fields. MOF membranes show excellent separation performance in gas separation, oil-water separation, among other applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Superwetting Electrospun PDMS/PMMA Membrane for PM2.5 Capture and Microdroplet Transfer

Nan Lu et al.

Summary: The study developed a superwetting electrospun PDMS/PMMA membrane (EPPM) for efficient PM2.5 capture and microdroplet transfer, with outstanding thermal stability and purification efficiency of nearly 100% under high humidity conditions. The membrane also demonstrated excellent performance in water sample analysis and showed a high contact angle for water.

LANGMUIR (2021)

Review Nanoscience & Nanotechnology

Multistructured Electrospun Nanofibers for Air Filtration: A Review

Tao Lu et al.

Summary: This paper reviews the preparation methods of high-performance electrospun air filtration membranes (EAFMs) and the typical surface structures and filtration principles of electrospun fibers for air filtration. It also summarizes the research progress of EAFMs with multistructures and their applications, as well as discussing challenges, limitations, and future trends for development.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Engineering, Chemical

Nanofibrous Mats for Particulate Matter Filtration

Bright Archer et al.

Summary: This review discusses the high filtration efficiency of nanofibrous filters for removing PM pollution, covering various fabrication techniques and parameters, as well as addressing future challenges in filter technology, making it a comprehensive overview in the field.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Nanoscience & Nanotechnology

Free-Standing Ultrafine Nanofiber Papers with High PM0.3 Mechanical Filtration Efficiency by Scalable Blow and Electro-Blow Spinning

Yibo Liu et al.

Summary: Ultrathin and -light nanofibrous filters with excellent filtration properties have been developed to efficiently prevent 0.3 μm particulate matter, exhibiting filtration efficiency ranging from 98.75% to 99.99% and pressure drops of 125.44 Pa to 0.9 g m(-2) areal density. They have the potential to be widely used in personal protective equipment, industrial waste gas treatment, and purification systems.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

MOF-Embedded Bifunctional Composite Nanofiber Membranes with a Tunable Hierarchical Structure for High-Efficiency PM0.3 Purification and Oil/Water Separation

Yajian Li et al.

Summary: The hierarchically structured PES@ZIF8-PSA/PES composite nanofiber membrane exhibits high air filtration efficiency and superior PM0.3 purification capacity with low pressure drop. It also possesses long-term recycling ability for purifying PM2.5, high temperature resistance, flame retardancy, good chemical stability, satisfactory transmittance, and robust self-cleaning ability. Additionally, it effectively separates oil-water mixtures and oil-water emulsions due to its selective wettability properties, making it suitable for a wide range of applications from environmental governance to industrial security.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Macroscopic-Scale Preparation of Aramid Nanofiber Aerogel by Modified Freezing- Drying Method

Chunjie Xie et al.

Summary: Aerogel is a low-density, highly porous material closely connected to complex processing methods. By using a modified freezing-drying method with polymerization-induced aramid nanofibers as building blocks, all-para-aromatic-amide aerogels with high efficiency can be prepared. The aerogels have high compressive strengths and low thermal conductivities, making them suitable for applications as thermal insulating or shock absorption materials.

ACS NANO (2021)

Article Engineering, Environmental

Facile strategy to prepare polyimide nanofiber assembled aerogel for effective airborne particles filtration

Shiya Qiao et al.

Summary: In this study, a polyimide aerogel with stable structure was successfully prepared, exhibiting excellent mechanical properties and high filtration efficiency, suitable for applications in high temperature filtration and other fields.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

Purification of black alkali liquor by microchannel filtration to promote energy savings and consumption reduction in lye cleaning systems

Li Dai et al.

Summary: A new microchannel filtration process and device were proposed and used in this study to replace traditional methods, leading to significant improvements in filtration efficiency and reductions in workload, floor area, and energy consumption.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Materials Science, Characterization & Testing

Flexible, fatigue resistant, and heat-insulated nanofiber-assembled polyimide aerogels with multifunctionality

Xianbo Hou et al.

POLYMER TESTING (2020)

Article Chemistry, Physical

Exploiting hydrophobicity and hydrophilicity in nanopores as a design principle for smart MOF microtanks for methane storage

Ryther Anderson et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2020)

Article Nanoscience & Nanotechnology

Flexible Multifunctional Porous Nanofibrous Membranes for High-Efficiency Air Filtration

Baixian Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Polymer Science

Superhydrophilic and underwater superoleophobic membranes - review of synthesis methods

Soheil Zarghami et al.

PROGRESS IN POLYMER SCIENCE (2019)

Article Materials Science, Multidisciplinary

Novel anti-fouling polyethersulfone/polyamide 66 membrane preparation for air filtration by electrospinning

Jinshan Cao et al.

MATERIALS LETTERS (2017)

Review Nanoscience & Nanotechnology

A Review of the Fundamental Principles and Applications of Solution Blow Spinning

John L. Daristotle et al.

ACS APPLIED MATERIALS & INTERFACES (2016)