4.1 Article

Overcoming the voltage losses caused by the acceptor-based interlayer in laminated indoor OPVs

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Polymer Science

Indoor photovoltaic energy harvesting based on semiconducting π-conjugated polymers and oligomeric materials toward future IoT applications

Sunbin Hwang et al.

Summary: With the advancement of artificial intelligence, establishing self-powered electronic systems supported by energy harvesters is desired. The development of indoor organic photovoltaic devices (iOPVs) based on organic semiconductors has attracted significant interest as eco-friendly power sources. iOPVs have shown high power conversion efficiencies and output power densities, making them suitable for low-power electronics in IoT applications.

POLYMER JOURNAL (2023)

Article Engineering, Environmental

N-type small molecule electron transport materials with D-A-D conjugated core for non-fullerene organic solar cells

Dan Zhou et al.

Summary: Two D-A-D-type small-molecular conjugated electrolytes (SMCEs) with self-doping effects were successfully synthesized and showed significant photovoltaic performance. Among them, DPPM2TPA exhibited better performance, along with thickness insensitivity and universality.

CHEMICAL ENGINEERING JOURNAL (2023)

Review Chemistry, Multidisciplinary

Exciton diffusion and dissociation in organic and quantum-dot solar cells

Dan He et al.

Summary: For the process of photovoltaic conversion in organic solar cells (OSCs) and quantum-dot solar cells (QDSCs), three of four steps are determined by exciton behavior. It is important to regulate exciton behavior in OSCs and QDSCs for achieving high power conversion efficiency. Recent progress has been made in managing exciton behavior to achieve prolonged exciton diffusion length and improved exciton dissociation.

SMARTMAT (2023)

Article Chemistry, Physical

Understanding Performance Limiting Interfacial Recombination in pin Perovskite Solar Cells

Jonathan Warby et al.

Summary: Perovskite semiconductors are an attractive option in photovoltaic technology due to their exceptional properties. However, the nonradiative recombination at the perovskite/organic electron transport layer junctions limits the performance of single- and multijunction cells. This study reveals that the most significant contribution to the recombination loss occurs within the first monolayer of C-60 at the perovskite/C-60 interface. By reducing the surface coverage of C-60, the radiative efficiency of the bare perovskite layer can be maintained. These findings pave the way for improving the performance of perovskite solar cells.

ADVANCED ENERGY MATERIALS (2022)

Article Multidisciplinary Sciences

Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells

Xian'e Li et al.

Summary: Energy level alignment at donor-acceptor heterojunctions is crucial for charge generation and recombination in organic photovoltaic devices. This study systematically investigates the energy level alignment and its variation at different interfaces. Contrary to previous assumptions, significant vacuum level shifts are observed at the interfaces, resulting in reduced interfacial energetic offsets and increased charge transfer state energies.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Physical

Matching electron transport layers with a non-halogenated and low synthetic complexity polymer:fullerene blend for efficient outdoor and indoor organic photovoltaics

Xabier Rodriguez-Martinez et al.

Summary: This study presents a non-halogenated and low synthetic complexity ink formulation for the photoactive layer (PAL) of organic solar cells. The formulation shows a high power conversion efficiency under both outdoor and indoor conditions. SnO2 is identified as the most suitable electron transport layer for indoor environments. The combination of PTQ10:PC61BM with either PEI-Zn or SnO2 is positioned as a promising system for industrialization of low cost, multipurpose OPV modules.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Nanoscience & Nanotechnology

N-Type Self-Doped Hyperbranched Conjugated Polyelectrolyte as Electron Transport Layer for Efficient Nonfullerene Organic Solar Cells

Dan Zhou et al.

Summary: The novel hyperbranched conjugated polyelectrolyte (CPE) significantly improves the power conversion efficiency (PCE) of nonfullerene organic solar cells (NOSCs), enhancing carrier transport and collection in the devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Enhanced Charge Selectivity via Anodic-C60 Layer Reduces Nonradiative Losses in Organic Solar Cells

Manasi Pranav et al.

Summary: Proper interfaces and charge transport layers can enhance the performance of optoelectronic devices by facilitating efficient carrier injection and extraction. Surface recombination is identified as a significant contributor to nonradiative losses in organic solar cells, which can be reduced by the insertion of selective charge extraction layers to improve device efficiency.

ACS APPLIED MATERIALS & INTERFACES (2021)

Editorial Material Chemistry, Physical

Accurate photovoltaic measurement of organic cells for indoor applications

Yong Cui et al.

Article Chemistry, Physical

A highly crystalline non-fullerene acceptor enabling efficient indoor organic photovoltaics with high EQE and fill factor

Fujin Bai et al.

Summary: A highly crystalline small molecular acceptor named FCC-Cl with an optical band gap of 1.71 eV is reported for indoor applications, achieving high external quantum efficiency and fill factor in OPVs. The devices based on D18:FCC-Cl demonstrated an impressive power conversion efficiency of 28.8% under 2,600 K LED lighting, and can achieve high efficiencies over a wide range of active-layer thicknesses, suitable for large-scale roll-to-roll printing processes.
Article Chemistry, Physical

Emerging Indoor Photovoltaic Technologies for Sustainable Internet of Things

Vincenzo Pecunia et al.

Summary: This article discusses the challenge of powering IoT devices through energy harvesting, with a focus on indoor photovoltaics as an attractive solution. It highlights the importance of eco-friendly materials and fabrication processes in order to sustainably power IoT devices. Emerging lead-free perovskite-inspired IPV technologies offer a promising direction for low-cost, durable, and efficient energy harvesting that is not harmful to users or the environment.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Recent progress in thick-film organic photovoltaic devices: Materials, devices, and processing

Difei Zhang et al.

Summary: To successfully transfer organic photovoltaic technologies to industrial production, challenges such as developing high-mobility light-harvesting materials, minimizing upscaling losses, and designing advanced solar modules need to be overcome. Efforts have been focused on understanding how molecular structures, device architectures, and carrier dynamics affect photovoltaic performance, leading to guidelines for designing high-efficiency, thickness-insensitive devices for mass production.

SUSMAT (2021)

Article Physics, Applied

Reducing Energy Losses at the Organic-anode-buffer Interface of Organic Photovoltaics

Kan Ding et al.

PHYSICAL REVIEW APPLIED (2020)

Article Nanoscience & Nanotechnology

Effect of the Energy Offset on the Charge Dynamics in Nonfullerene Organic Solar Cells

Yunhao Cai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Reducing Voltage Losses in the A-DA'D-A Acceptor-Based Organic Solar Cells

Jun Yuan et al.

Review Nanoscience & Nanotechnology

Interfaces in organic electronics

Mats Fahlman et al.

NATURE REVIEWS MATERIALS (2019)

Article Chemistry, Physical

How to determine optical gaps and voltage losses in organic photovoltaic materials

K. Vandewal et al.

SUSTAINABLE ENERGY & FUELS (2018)

Article Chemistry, Physical

Optical Gaps of Organic Solar Cells as a Reference for Comparing Voltage Losses

Yuming Wang et al.

ADVANCED ENERGY MATERIALS (2018)

Article Engineering, Electrical & Electronic

Asymmetric photocurrent extraction in semitransparent laminated flexible organic solar cells

Jonas Bergqvist et al.

NPJ FLEXIBLE ELECTRONICS (2018)

Article Chemistry, Physical

Charge Transport in Pure and Mixed Phases in Organic Solar Cells

Armantas Melianas et al.

ADVANCED ENERGY MATERIALS (2017)

Article Nanoscience & Nanotechnology

Tuning the Morphology of Solution-Sheared P3HT:PCBM Films

Julia A. Reinspach et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Physics, Applied

Flexible, light trapping substrates for organic photovoltaics

Yoonseok Park et al.

APPLIED PHYSICS LETTERS (2016)

Article Materials Science, Multidisciplinary

Vertical stratification and its impact on device performance in a polycarbazole based copolymer solar cells

Tao Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Article Materials Science, Multidisciplinary

Properties of interlayer for organic photovoltaics

Tzung-Han Lai et al.

MATERIALS TODAY (2013)

Article Materials Science, Multidisciplinary

Phase separation-driven stratification in conventional and inverted P3HT:PCBM organic solar cells

E. Pavlopoulou et al.

ORGANIC ELECTRONICS (2013)

Article Chemistry, Multidisciplinary

Solar cells with one-day energy payback for the factories of the future

Nieves Espinosa et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Physical

Universal energy-level alignment of molecules on metal oxides

Mark T. Greiner et al.

NATURE MATERIALS (2012)

Article Chemistry, Physical

Dynamic Monte Carlo Simulation for Highly Efficient Polymer Blend Photovoltaics

Lingyi Meng et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2010)

Review Chemistry, Multidisciplinary

Energy-Level Alignment at Organic/Metal and Organic/Organic Interfaces

Slawomir Braun et al.

ADVANCED MATERIALS (2009)

Article Chemistry, Physical

On the origin of the open-circuit voltage of polymer-fullerene solar cells

Koen Vandewal et al.

NATURE MATERIALS (2009)

Article Physics, Applied

Fermi-level pinning at conjugated polymer interfaces

C Tengstedt et al.

APPLIED PHYSICS LETTERS (2006)

Article Chemistry, Multidisciplinary

Ambipolar charge transport in films of methanofullerene and poly(phenylenevinylene)/methanofullerene blends

SM Tuladhar et al.

ADVANCED FUNCTIONAL MATERIALS (2005)