☆ 4.7 Article

Data-driven modelling of the multiaxial yield behaviour of nanoporous metals

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Modeling structure-property relationships with convolutional neural networks: Yield surface prediction based on microstructure images

Julian N. Heidenreich et al.

Summary: The use of micromechanics and homogenization theory allows for predicting the effective mechanical properties of materials based on microstructural information. The microstructural information is encoded in images using convolutional neural networks (CNN), through which geometric information is reduced to ten characteristic features. A fully connected neural network model is introduced to predict the effective yield surfaces based on the encoded information, resulting in a computationally efficient CNN-FCNN model.

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Densification of nanoporous metals during nanoindentation: The role of structural and mechanical properties

N. Huber et al.

Summary: The analysis of the densification behavior of nanoporous metals in nanoindentation is challenging in simulations and experiments. A deeper understanding of the densification behavior provides valuable information about the different deformation mechanisms in nanoindentation and compression experiments. The developed two-scale model allows for predicting the densification field for variable microstructure and elastic-plastic behavior. It could be shown that the penetration depth of the densification field is mainly controlled by the ratio of the macroscopic work hardening rate to yield stress. The shape as well as the value at characteristic isolines of densification depend mainly on the macroscopic plastic response of the nanoporous material. This could be confirmed by nanoindentation experiments, where the densification under the indenter was measured for ligament sizes from 35 to 150 nm. Although the depth of the densification field was underpredicted by the simulations, the experiments confirmed the predicted trends.

JOURNAL OF MATERIALS RESEARCH (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanistically informed artificial neural network model for discovering anisotropic path-dependent plasticity of metals

Xiao Liu et al.

Summary: This study proposes an artificial neural network model informed by mechanistic features to discover anisotropic path-dependent plasticity. The proposed method successfully predicts the elastoplastic tangent stiffness and anisotropic yield behavior of materials using a modified return-mapping algorithm combined with an automatic differential technique. The results demonstrate the high accuracy of the proposed method in revealing the hidden anisotropic and hardening behavior of materials.

MATERIALS & DESIGN (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simulated annealing framework for generating representative volume elements of materials with complex ligamentous microstructures

Iman Davoodi Kermani et al.

Summary: In this study, a highly efficient simulated annealing (SA) framework is proposed to generate synthetic representative volume elements (RVE) with network structures. The framework allows the user to predefine microstructural characteristics at both the network level and the level of individual ligaments using probability distributions. Mechanical properties of various RVEs generated by this framework are analyzed using the finite element method, establishing links between microstructural descriptors and macromechanical properties of materials with ligamentous microstructures.

COMPUTATIONAL MATERIALS SCIENCE (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the importance of self-consistency in recurrent neural network models representing elasto-plastic solids

Colin Bonatti et al.

Summary: This study explores the use of recurrent neural networks as surrogate material models, introducing a new architecture LMSC to address the limitations of existing approaches, demonstrating optimal performance in long sequence applications.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Machine learning constitutive models of elastomeric foams

Ari Frankel et al.

Summary: This article introduces the complex microstructure and material response of flexible foams and proposes a research approach to develop and validate new constitutive models using machine learning methods. By comparing different machine learning models, the strengths and weaknesses of each method are discussed.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Discovering plasticity models without stress data

Moritz Flaschel et al.

Summary: This paper proposes a data-driven approach for automated discovery of material laws, called EUCLID. It requires no stress data, only displacement and force data. Through sparse regression of a candidate function catalog, interpretable mathematical models can be obtained. Virtual experiments demonstrate the ability of EUCLID to accurately discover different plastic yield surfaces and hardening mechanisms.

NPJ COMPUTATIONAL MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimal Data-Generation Strategy for Machine Learning Yield Functions in Anisotropic Plasticity

Ronak Shoghi et al.

Summary: Trained machine learning algorithms can be used as efficient surrogate models for complex material behavior. This study investigates how to establish an optimal data-generation strategy to train machine learning yield functions with the least effort. It is shown that even for materials with significant plastic anisotropy, as few as 300 data points are sufficient to successfully train the machine learning yield function.

FRONTIERS IN MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine-learning convex and texture-dependent macroscopic yield from crystal plasticity simulations

Jan N. Fuhg et al.

Summary: This study focuses on the influence of the microstructure of polycrystalline materials on their macroscopic deformation response. It develops a computational model based on crystal plasticity and utilizes a machine learning framework to predict macroscopic yield. By using a 3D finite element solver to generate a macroscopic yield function database, it provides a new approach for studying the material response from micro to macro scales.

MATERIALIA (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

A review of artificial neural networks in the constitutive modeling of composite materials

Xin Liu et al.

Summary: Machine learning models, especially artificial neural networks, are increasingly used in engineering fields. However, there are still unsolved issues hindering the acceptance of ANN models in the practical design and analysis of composite materials. The emerging machine learning techniques pose both new opportunities and challenges in the data-based design paradigm.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Scaling behavior of stiffness and strength of hierarchical network nanomaterials

Shan Shi et al.

Summary: The study demonstrates the preparation of macroscopic hierarchical network nanomaterials through the self-organization processes of dealloying, which provide enhanced strength and stiffness at a given solid fraction, and allow for reduced solid fractions. The scaling laws for mechanics and atomistic simulation support these observations, indicating the systematic benefits of hierarchical structuring in nanoscale network structures. These materials may serve as prototypes for future lightweight structural materials.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

A Strategy for Dimensionality Reduction and Data Analysis Applied to Microstructure-Property Relationships of Nanoporous Metals

Norbert Huber

Summary: Nanoporous metals, prepared through dealloying, offer a complex microstructure that can be tuned to optimize macroscopic mechanical properties, making them an ideal material for studying strategies for dimensionality reduction.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Hybrid Modelling by Machine Learning Corrections of Analytical Model Predictions towards High-Fidelity Simulation Solutions

Frederic E. Bock et al.

Summary: In the field of materials mechanics, incorporating physical laws into machine learning predictions can lead to lower prediction errors and robustness compared to predictions based solely on data. A hybrid modeling approach combining physics-based models with corrective models proves to be more efficient in prediction, especially in cases where data is scarce.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale constitutive model using data-driven yield function

Hyungbum Park et al.

Summary: A method for formulating data-driven yield functions using machine learning technique on multi-axial yield data of amorphous polymers was established in this study. Based on the mined data-driven yield function, a constitutive model was constructed and compared with classical models. The study also considered generating sufficient data for multi-axial hardening responses using molecular dynamics simulations and investigated the influence of noise on the chosen functions through additional simulations.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Development of interpretable, data-driven plasticity models with symbolic regression

G. F. Bomarito et al.

Summary: This paper presents a framework for the rapid development of interpretable, data-driven constitutive models using symbolic regression technique. The approach successfully produces interpretable plasticity models through controlled test cases, demonstrating the robustness and scalability of the method. Reasonable recommendations are provided for more complex applications based on the controlled test cases.

COMPUTERS & STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

A hybrid approach to simulate the homogenized irreversible elastic-plastic deformations and damage of foams by neural networks

Christoph Settgast et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Chemistry, Physical

Data-Oriented Constitutive Modeling of Plasticity in Metals

Alexander Hartmaier

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the potential of recurrent neural networks for modeling path dependent plasticity

Maysam B. Gorji et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Prediction of elastic-plastic deformation of nanoporous metals by FEM beam modeling: A bottom-up approach from ligaments to real microstructures

A. Odermatt et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Review Chemistry, Physical

A Review of Experimentally Informed Micromechanical Modeling of Nanoporous Metals: From Structural Descriptors to Predictive Structure-Property Relationships

Claudia Richert et al.

MATERIALS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics

Frederic E. Bock et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid constitutive modeling: data-driven learning of corrections to plasticity models

Ruben Ibanez et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Deep learning predicts path-dependent plasticity

M. Mozaffar et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Computation of Thickness and Mechanical Properties of Interconnected Structures: Accuracy, Deviations, and Approaches for Correction

Claudia Richert et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nanoporous gold: Preparation and applications to catalysis and sensors

Sang Hoon Kim

CURRENT APPLIED PHYSICS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dealloyed nanoporous materials with interface-controlled behavior

Joerg Weissmueller et al.

MRS BULLETIN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical response of nanoporous metals: A story of size, surface stress, and severed struts

Hai-Jun Jin et al.

MRS BULLETIN (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

On the multiaxial yielding and hardness to yield stress relation of nanoporous gold

K. R. Mangipudi et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Skeletonization, Geometrical Analysis, and Finite Element Modeling of Nanoporous Gold Based on 3D Tomography Data

Claudia Richert et al.

METALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Connections Between Topology and Macroscopic Mechanical Properties of Three-Dimensional Open-Pore Materials

Norbert Huber

FRONTIERS IN MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Effect of nodal mass on macroscopic mechanical properties of nanoporous metals

J. Jiao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

添加到收藏夹

Article Engineering, Mechanical

Elastic behaviour at the nanoscale of innovative composites of nanoporous gold and polymer

Emma Griffiths et al.

EXTREME MECHANICS LETTERS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation mechanisms in nanoporous metals: Effect of ligament shape and disorder

J. Jiao et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoporous Gold-Testing Macro-scale Samples to Probe Small-scale Mechanical Behavior

Nadiia Mameka et al.

MATERIALS RESEARCH LETTERS (2016)

添加到收藏夹

Article Engineering, Mechanical

Numerical and analytical solutions for anisotropic yield surfaces of the open-cell KELVIN foam

Johannes Storm et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Scaling laws of nanoporous gold under uniaxial compression: Effects of structural disorder on the solid fraction, elastic Poisson's ratio, Young's modulus and yield strength

B. Roschning et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Elastic and plastic Poisson's ratios of nanoporous gold

Lukas Luehrs et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Developing scaling relations for the yield strength of nanoporous gold

Nicolas J. Briot et al.

PHILOSOPHICAL MAGAZINE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Scaling laws of nanoporous metals under uniaxial compression

N. Huber et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multiscale modeling of charge-induced deformation of nanoporous gold structures

S. S. R. Saane et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

添加到收藏夹

Review Computer Science, Artificial Intelligence

Support vector machines in engineering: an overview

S. Salcedo-Sanz et al.

WILEY INTERDISCIPLINARY REVIEWS-DATA MINING AND KNOWLEDGE DISCOVERY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical response of nanoporous gold

Diana Farkas et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Physics, Applied

Mechanical properties and scaling laws of nanoporous gold

Xiao-Yu Sun et al.

JOURNAL OF APPLIED PHYSICS (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

What is the Young's Modulus of Silicon?

Matthew A. Hopcroft et al.

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2010)

添加到收藏夹

Article Chemistry, Physical

Nanoporous gold: a new material for catalytic and sensor applications

Arne Wittstock et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2010)

添加到收藏夹

Article Mechanics

On the microstructure of open-cell foams and its effect on elastic properties

Wen-Yea Jang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)

添加到收藏夹

Article Mechanics

Numerical simulations of 3D open cell structures - influence of structural irregularities on elasto-plasticity and deformation localization

Mathias H. Luxner et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

添加到收藏夹

Article Mechanics

Compressive response of open-cell foams. Part I: Morphology and elastic properties

L Gong et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Isotropic constitutive models for metallic foams

VS Deshpande et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

添加到收藏夹

Article Engineering, Mechanical

A continuum plasticity model for the constitutive and indentation behaviour of foamed metals

RE Miller

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.