4.7 Article

Efficient catalytic transfer hydrogenation of raw bio-oil over various CuO catalysts

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Switching the production of oxygenated platform chemicals during pyrolysis of sugarcane bagasse by regulating the secondary reactions

Anqing Zheng et al.

Summary: This study systematically explored the regulation of secondary reactions during the pyrolysis of sugarcane bagasse by adjusting the pyrolysis temperature and H2SO4 loading. It was found that reducing the pyrolysis temperature suppressed both primary and secondary reactions, while adjusting H2SO4 loading promoted primary depolymerization reactions and secondary dehydration reactions. These findings demonstrate the capability of adjusting H2SO4 loading to regulate primary and secondary reactions during biomass pyrolysis at low temperatures and enable product switching.
Article Energy & Fuels

Fast pyrolysis of algae model compounds for bio-oil: In-depth insights into the volatile interaction mechanisms based on DFT calculations

Donghua Xu et al.

Summary: This study investigated the volatile interaction mechanisms of algae biomass model compounds during fast pyrolysis. Experimental and computational results revealed that co-pyrolysis of certain model compounds resulted in increased organic compound content in the bio-oil. These findings provide insights into the fast pyrolysis mechanisms of algae biomass and offer theoretical support for the efficient utilization of algae.
Article Chemistry, Analytical

A novel production of aromatic hydrocarbons via dielectric barrier discharge assisted one-stage pyrolysis-catalysis of biomass: Insights into modified HZSM-5 selectivity and stability

Yongsheng Fan et al.

Summary: Dielectric barrier discharge (DBD) was used to convert biomass into aromatic hydrocarbons. The selectivity and stability of HZSM-5 modified by Ti, Ni, and Ni-Ti were investigated. Ti modification enhanced cracking removal of carbon and oxygen, while Ni modification improved hydrogen transfer capacity. Bimetallic modification increased HHV and yield. The refined bio-oils had a high aromatic degree and were suitable as gasoline additives. Ti modification showed better anti-coking performance, while Ni-Ti/HZSM-5 modification exhibited better potential in improving selectivity and enhancing stability.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Article Chemistry, Applied

Recent advances in pyrolysis of cellulose to value-added chemicals

Xin Huang et al.

Summary: This translation summarizes the latest research progress on the depolymerization of cellulose into specific chemicals through non-catalytic and catalytic pyrolysis, and analyzes and summarizes the optimal conditions for these value-added chemicals, providing feasible directions for future industrialization.

FUEL PROCESSING TECHNOLOGY (2022)

Review Chemistry, Analytical

A minireview on catalytic fast co-pyrolysis of lignocellulosic biomass for bio-oil upgrading via enhancing monocyclic aromatics

Siying Zhong et al.

Summary: Catalytic co-pyrolysis of lignocellulosic biomass is an important method for producing biofuels and increasing the yield and quality of monocyclic aromatics in bio-oil.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Review Chemistry, Applied

Alcohol-assisted hydrodeoxygenation as a sustainable and cost-effective pathway for biomass derivatives upgrading

Hao Xu et al.

Summary: This review critically summarizes the potentials and challenges of alcohol-assisted hydrodeoxygenation (HDO) strategy from diverse perspectives including safety, economics, and catalytic efficiency. The alcohol-assisted strategy is divided into combined reforming-HDO route and catalytic transfer hydrogenation/hydrogenolysis (CTH) route based on the discrepancies of in-situ hydrogen generation. Different catalytic behaviors are described and their applications are elaborated in several upgrading processes of representative biomass model compounds, aiming to illustrate the potentials of alcohol-assisted HDO in biomass utilization.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Energy & Fuels

Tailoring the selectivity of Cu-based catalysts in the furfural hydrogenation reaction: Influence of the morphology of the silica support

C. P. Jimenez-Gomez et al.

Summary: The catalytic behavior of Cu nanoparticles supported on different porous silica supports was investigated. It was found that the commercial silica support had higher furfuryl alcohol yields but was more prone to deactivation. The hydrothermal SBA15 support had limited access to furfural due to the agglomeration of Cu nanoparticles and larger pore sizes. The addition of fluoride in the synthesis of mesoporous silica (mesocellular foam) facilitated furfural access and provided higher catalytic activity.
Article Chemistry, Physical

Synergetic effect of Cu0 -Cu+ derived from layered double hydroxides toward catalytic transfer hydrogenation reaction

Yingyu Ren et al.

Summary: This study prepared a Cu-based catalyst by transforming layered double hydroxides precursor, which showed promising catalytic behavior in the CTH reaction of furfural. The coexistence of Cu-0 and Cu+ on the catalyst surface and their synergistic effect were found to play a vital role in determining the catalytic behavior. The findings of this study provide important insights for other CTH reactions in the upgrading processes of biomass.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Green & Sustainable Science & Technology

Mechanistic insights into copper oxides catalyzed bio-based furfural hydrogenation using methanol as in-situ hydrogen donor

Jun Zhang et al.

Summary: In this study, CuO and Cu2O were used as catalysts for the transformation of bio-based furfural in methanol, serving as both the solvent and an in-situ hydrogen source. The catalytic mechanism of copper oxides (CuOx, x = 0.5, 1) during the reaction was clearly elucidated. The results showed that the conversion of furfural into furfuryl alcohol and 2-methylfuran largely depended on the hydrogen production capability from methanol reforming and furfural adsorption strength over CuOx.

RENEWABLE ENERGY (2022)

Article Environmental Sciences

Solid fuel production from co-hydrothermal carbonization of polyvinyl chloride and corncob: Higher dechlorination efficiency and process water recycling

Zhaoyang Li et al.

Summary: This study investigated the dechlorination reaction during hydrothermal carbonization (HTC) and found that co-HTC could significantly reduce the activation energy for dechlorination. The co-HTC process achieved rapid dechlorination and carbonization, leading to a lower chloride content in the hydrochar. The recycling of process water maintained a high chloride removal efficiency.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Chemistry, Multidisciplinary

Catalytic transfer hydrogenation of biomass-derived furfural to furfuryl alcohol with formic acid as hydrogen donor over CuCs-MCM catalyst

Tao Wang et al.

Summary: CuCs(2)-MCM is an efficient catalyst for the CTH of furfural to furfuryl alcohol using formic acid as the hydrogen donor. The doping of Cs improved the dispersion of Cu active sites, resulting in enhanced hydrogenation activity. Surface acidity was identified as the primary factor affecting the catalytic activity of CuCs(2)-MCM.

CHINESE CHEMICAL LETTERS (2021)

Article Engineering, Environmental

Bio-oil upgrading through hydrogen transfer reactions in supercritical solvents

Young-Kwon Park et al.

Summary: The study reviews the transfer hydrogenation method to upgrade bio-oil, focusing on the major factors affecting the process. It concludes by identifying future challenges and the requirements to make the transfer hydrogenation upgrading process commercially available.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Energy & Fuels

Upgrading of bio-oil from thermochemical conversion of various biomass - Mechanism, challenges and opportunities

Tharifkhan Shan Ahamed et al.

Summary: Bio-oil is being investigated as a potential alternative to petroleum crude due to its similar composition, but its complex composition presents challenges. Therefore, upgrading techniques are necessary to improve the quality and application of bio-oil. Research on enhancing bio-oil quality through various methods is an important direction for further study.
Review Chemistry, Multidisciplinary

Selective hydrogenation of phenol for cyclohexanone: A review

Hui Chen et al.

Summary: This study focuses on the green chemistry method of producing cyclohexanone from phenol, analyzing the performance differences of different catalysts in hydrogenation reactions and the potential development prospects of these catalysts.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Chemistry, Applied

Hydrogen-free hydrogenation of furfural to furfuryl alcohol and 2-methyl-furan over Ni and Co-promoted Cu/γ-Al2O3 catalysts

Munsuree Kalong et al.

Summary: This study systematically investigated the catalytic transformation of furfural to furfuryl alcohol and 2-methylfuran without the need for hydrogen supply using bimetallic NiCuAl and CoCuAl catalysts. The bimetallic catalysts showed higher yields and selectivity compared to monometallic CuAl and NiAl catalysts, attributed to the stronger Lewis acidic centers on their surfaces. Additionally, the CoCuAl catalyst exhibited lower catalyst deactivation and carbon deposition under an H-2-free atmosphere.

FUEL PROCESSING TECHNOLOGY (2021)

Review Energy & Fuels

Challenges and Opportunities for Bio-oil Refining: A Review

Anamaria Paiva Pinheiro Pires et al.

ENERGY & FUELS (2019)

Review Energy & Fuels

A review of recent research and developments in fast pyrolysis and bio-oil upgrading

Ali Khosravanipour Mostafazadeh et al.

BIOMASS CONVERSION AND BIOREFINERY (2018)

Review Green & Sustainable Science & Technology

Prospects for pyrolysis technologies in the bioenergy sector: A review

Poritosh Roy et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Chemistry, Physical

Effect of oxide supports on Pd-Ni bimetallic catalysts for 1,3-butadiene hydrogenation

Ruijun Hou et al.

APPLIED CATALYSIS A-GENERAL (2015)

Article Chemistry, Applied

Exploitment of niobium oxide effective acidity for xylose dehydration to furfural

Maria Jose Campos Molina et al.

CATALYSIS TODAY (2015)

Article Thermodynamics

In situ hydrogenation of model compounds and raw bio-oil over Raney Ni catalyst

Xu Ying et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Article Materials Science, Multidisciplinary

Epoxidation of propylene by molecular oxygen over unsupported AgCux bimetallic catalyst

Xiang Zheng et al.

RARE METALS (2015)

Article Green & Sustainable Science & Technology

Upgrading Bio-Oil Model Compounds Phenol and Furfural with In Situ Generated Hydrogen

Zhichao Tan et al.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2014)

Review Green & Sustainable Science & Technology

Upgrading of bio-oil from biomass fast pyrolysis in China: A review

Le Zhang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Article Chemistry, Multidisciplinary

One-Pot Catalytic Conversion of Cellulose and of Woody Biomass Solids to Liquid Fuels

Theodore D. Matson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Engineering, Chemical

Hydrogen production by catalytic steam reforming of acetol, a model compound of bio-oil

M. Carmen Ramos et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)