☆ 4.7 Article

Investigation of the prolonged effect of electric stress into the cement mortar incorporating silicon carbide

JOURNAL OF BUILDING ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Analytical

Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures

Bo Huang et al.

Summary: In this paper, a rugged cementitious composite sensor for monitoring chloride ingress in concrete structures is introduced. The sensor consists of a chloride ion-selective functionalized graphene film sandwiched between two cementitious composites. The sensor's response to different chloride concentrations was characterized using electrochemical impedance spectroscopy (EIS). The study also quantified the impact of pore solution, temperature, and humidity on the sensor's response. The experimental results showed that the sensor successfully measured chloride concentration changes with good sensitivity and had good reversibility and stability.

SENSORS AND ACTUATORS B-CHEMICAL (2023)

添加到收藏夹

Review Construction & Building Technology

A review of electrically conductive concrete heated pavement system technology: From the laboratory to the full-scale implementation

Md Lutfor Rahman et al.

Summary: Transportation agencies in cold regions often face economic losses due to the inefficiency and environmental hazards of traditional ice and snow removal techniques. This study discusses the challenges of implementing electrically-conductive concrete for heated-pavement systems to make it economically attractive.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Using silicon carbide to increase thermal conductivity of cement composite for improving heating efficiency of floor heating system

Du Yinfei et al.

Summary: In this study, silicon carbide was introduced into sulfoaluminate cement to prepare silicon carbide/cement-based composites for increasing the heating efficiency of floor heating system. The results showed that the composites had high-temperature resistance and improved compressive strength and thermal conductivity. The heating time was shortened and the heating efficiency was increased.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Relationship between fractal feature and compressive strength of concrete based on MIP

Xiao Han et al.

Summary: This study analyzed the pore structure characteristics of concrete with different strength grades using Mercury intrusion porosimetry and established a mathematical model between fractal dimension and compressive strength. The fractal dimension can accurately describe the pore characteristics and is correlated with pore diameter and specific surface area.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Experimental Investigation on Piezoresistive Properties and Acoustic Emission Characteristics of Carbon Fiber-Based Gangue Concrete

Zequan He et al.

Summary: “The addition of carbon fiber significantly improves the electrical conductivity properties of gangue concrete. There is a good correlation between the electrical resistivity and acoustic emission of CF-GC. Monitoring changes in electrical resistivity and acoustic emission can predict deformations in gangue concrete structures.”

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

添加到收藏夹

Review Chemistry, Physical

Electrical Resistivity Measurements for Nondestructive Evaluation of Chloride-Induced Deterioration of Reinforced Concrete-A Review

Kevin Paolo V. Robles et al.

Summary: This study reviews and evaluates the application of electrical resistivity as a nondestructive technique for assessing chloride-induced deterioration in reinforced concrete. It discusses measurement techniques, correlation analysis, environmental factors, and addresses gaps in knowledge for future research.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

A more sustainable approach for producing less expensive electrically conductive concrete mixtures: Experimental and FE study

Heydar Dehghanpour et al.

Summary: In this study, electrically conductive concrete (ECON) specimens with different compositions were produced and their compressive strength and heat test results were investigated. Using the electrical properties, an ECON de-icing system was simulated on a real scale with Abaqus program and the temperature results were confirmed by experimental results.

COLD REGIONS SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Construction & Building Technology

Research on the self-sensing and mechanical properties of aligned stainless steel fiber-reinforced reactive powder concrete

Hui Wang et al.

Summary: The addition of stainless steel fibers (SSFs) in reactive powder concrete (RPC) significantly influences the electrical and mechanical properties of the material, with factors such as SSFs content, aspect ratio, and orientation playing important roles in determining performance. The interaction between these different factors is complex and can lead to variations in conductivity and piezoresistivity.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Mechanics

Microscale intrinsic properties of hybrid unidirectional/woven composite laminates: Part I experimental tests

Junjie Ye et al.

Summary: This research utilizes a combination of micro-CT and SEM techniques to study the microstructures and failure mechanisms of a hybrid unidirectional/woven composite laminate. The study reveals matrix damage in both woven and unidirectional laminae, as well as distinct delamination between the UD laminae and the woven composites. The potential of combining micro-CT with SEM in investigating local damage and intrinsic failure mechanisms in HUWCLs at microscale is demonstrated.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Thermodynamics

Ice-melting performance assessment of cement composites using silicon carbide as fine aggregate

Byeong Hun Woo et al.

Summary: This study evaluated the ice-melting performance of cement composites using silicon carbide as fine aggregate. The results showed that using silicon carbide can enhance the thermal properties and ice-melting performance of cement composites.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Multicriteria performance evaluation of fiber-reinforced cement composites: An environmental perspective

Arslan Akbar et al.

Summary: This study evaluated and compared the performance of different fiber reinforced cement composites, with recycled carbon fiber reinforced cement composite showing the highest flexural strength, lowest environmental impact, and minimum production cost. Based on the performance score, the FRCCs were ranked as follows: M-rCF > M-PPF > M-BF > M-GF > M-PVAF > M-vCF.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Construction & Building Technology

Structural health monitoring (SHM) and Nondestructive testing (NDT) of slender masonry structures: A practical review

Francisco J. Pallares et al.

Summary: The scientific community is actively working on proposing reliable analysis methodologies and non-invasive investigation technologies to assess the current state of conservation of historic buildings and to confirm their ability to resist future threats. The focus is on preserving invaluable cultural heritage through suitable structural assessment techniques, with attention paid to monitoring structural health using advanced technological methods like sensors, wireless connections, and continuous monitoring. Research has shown an increase in papers published on Structural Health Monitoring (SHM) and Nondestructive Testing (NDT) of masonry structures, particularly on slender elements in recent years.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Development of piezoresistive cement-based sensor using recycled waste glass cullets coated with carbon nanotubes

Wenkui Dong et al.

Summary: This study developed novel self-sensing cement-based sensors using CNTs-coated waste glass particles, which showed significant effects of waste glass content on workability, water impermeability, mechanical properties, electrical resistivity, and microstructure. The uniformly distributed CNTs on the surfaces of waste glass particles formed conductive passages in the cement matrix.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Physical

Effects of Thermal Conductive Materials on the Freeze-Thaw Resistance of Concrete

Byeong-Hun Woo et al.

Summary: In this study, silicon carbide, steel fiber, and graphite were used to enhance the thermal conductivity of concrete. Steel fiber compensated for the negative effects of graphite and improved thermal durability, while silicon carbide helped to enhance thermal durability in the same way as steel fiber. The study concluded that using 50% silicon carbide was the most effective approach, and caution should be taken when considering the content of graphite or other conductive materials in further studies.

MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

Investigation of sulfuric acid attack upon cement mortars containing silicon carbide powder

In Kyu Jeon et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Construction & Building Technology

Self-monitoring of smart concrete column incorporating CNT/NCB composite fillers modified cementitious sensors

Siqi Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Comparison between cement paste and asphalt mastic modified by carbonaceous materials: Electrical and thermal properties

Ali Arabzadeh et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Instruments & Instrumentation

Electrical resistivity and mechanical properties of cementitious composite incorporating conductive rubber fibres

Wenkui Dong et al.

SMART MATERIALS AND STRUCTURES (2019)

添加到收藏夹

Article Construction & Building Technology

Experimental study on leaching-abrasion behavior of concrete in flowing solution with low velocity

Huan-Huan Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Effect of electrical curing application on setting time of concrete with different stress intensity

Tayfun Uygunoglu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Multifunctional electrically conductive concrete using different fillers

Amr S. El-Dieb et al.

JOURNAL OF BUILDING ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Analytical

Electrical Properties of Cement-Based Composites with Carbon Nanotubes, Graphene, and Graphite Nanofibers

Doo-Yeol Yoo et al.

SENSORS (2017)

添加到收藏夹

Article Construction & Building Technology

Effects of coarse aggregates on the electrical resistivity of Portland cement concrete

Tsung-Chin Hou et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Thermal conductivity of silicon carbide composites with highly oriented graphene nanoplatelets

Benito Roman-Manso et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Engineering, Manufacturing

Electrostatic self-assembled carbon nanotube/nano carbon black composite fillers reinforced cement-based materials with multifunctionality

Baoguo Han et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Construction & Building Technology

Three-phase composite conductive concrete for pavement deicing

Jianmin Wu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Electrical properties of cement-based composites containing carbon black particles

A. O. Monteiro et al.

MATERIALS TODAY-PROCEEDINGS (2015)

添加到收藏夹

Article Construction & Building Technology

Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete application

Mochammad Syaiful Anwar et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Construction & Building Technology

Conductive aggregate prepared using graphite and clay and its use in conductive mortar

Yongjia He et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Engineering, Industrial

Friction Stir Welding assisted by electrical Joule effect

Telmo G. Santos et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A study on electrical and thermal properties of conductive concrete

Tehsien Wu et al.

COMPUTERS AND CONCRETE (2013)

添加到收藏夹

Article Construction & Building Technology

Elevated-temperature thermal properties of lightweight foamed concrete

Md Azree Othuman et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrochemical extraction of chlorides from reinforced concrete using a conductive cement paste as the anode

A. Perez et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Chemistry, Physical

Polypyrrole/Silicon Carbide Nanocomposites with Tunable Electrical Conductivity

Pallavi Mavinakuli et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrically Conductive Concrete for Heating Using Steel Bars as Electrodes

Hou Zuofu et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2010)

添加到收藏夹

Article Construction & Building Technology

Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites

Hui Li et al.

CEMENT & CONCRETE COMPOSITES (2006)

添加到收藏夹

Article Construction & Building Technology

Conductivity of carbon fiber reinforced cement-based composites

B Chen et al.

CEMENT & CONCRETE COMPOSITES (2004)

添加到收藏夹

Article Construction & Building Technology

Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement

JY Cao et al.

CEMENT AND CONCRETE RESEARCH (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.