☆ 4.7 Article

Multiscale progressive damage model for plain woven composites

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Multiscale modeling of the mechanical behavior of 3D braided CFRP composites under uniaxial tension

Yutong Liu et al.

Summary: An innovative multiscale modeling approach is developed to study the mechanical behavior of 3D braided CFRP composites under uniaxial tension. The approach includes microscale and mesoscale modeling, as well as a local homogenization approach. The predicted results of the multiscale model agree well with experimental measurements, validating the reliability of the approach. The damage mechanisms of 3D braided composites are investigated via multiscale modeling and SEM observations, revealing the dominant failure modes.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Review Mechanics

Mechanics of textiles used as composite preforms: A review

Junbo Xie et al.

Summary: This paper provides an overview of the literature dedicated to the mechanics of textiles used as composite preforms. Experimental test methods and mechanical models are reviewed. The experimental tests are categorized based on the type of load, while the mechanical models of textile materials are classified according to the scale of investigation and the numerical simulation method. The advantages and limitations of different approaches are discussed.

COMPOSITE STRUCTURES (2023)

添加到收藏夹

Article Mechanics

Behaviors of Composite Laminates Under Low-Energy Impact Using a Novel Analytical Framework

Xuecheng Han et al.

Summary: In this study, a mechanical behavior analysis framework for composite laminates under low-energy impact load is established using the micromechanics of failure theory and the mixed mode exponential cohesive zone model. The impact responses and failure modes of composite laminates are predicted using finite element modeling. The results show that the tensile failure of matrix and interlaminar shear delamination failure are the main failure modes. The experimental results are in good agreement with the numerical analysis, validating the effectiveness and accuracy of the constructed analysis method.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2022)

添加到收藏夹

Article Mechanics

Meso-scale Finite Element (FE) modelling of biaxial carbon fibre non-crimp-fabric (NCF) based composites under uniaxial tension and in-plane shear

Han Yin et al.

Summary: In this study, a novel three-dimensional meso-scale RUC model based on the FE method was proposed to investigate biaxial NCF composites. A multiscale framework was also developed, which provided a numerical prediction method that showed good agreement with experimental results by using a micromechanical RVE model and a macroscopic FE model.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Mechanics

An innovative micromechanics-based multiscale damage model of 3D woven composites incorporating probabilistic fiber strength distribution

Tao Zheng et al.

Summary: An innovative micromechanics-based multiscale damage model is proposed for investigating the complex failure behaviors of 3D woven composites. The model defines the fiber arrangements and yarn architecture of realistic composites, and identifies damage initiations and governs damage evolutions using micromechanics of failure criteria. The effects of loading direction and fiber strength distributions on the stress distributions and performance of woven composites are studied. The numerical predictions exhibit good correlation with experiments.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Micromechanics-based multiscale progressive failure simulation of 3D woven composites under compressive loading with minimal material parameters

Tao Zheng et al.

Summary: A novel micromechanics-based multiscale progressive damage model is proposed to simulate the compressive failure behaviors of 3D woven composites. The model accurately predicts the failure mechanisms of 3DWC under compression, eliminating the difficulty of obtaining accurate material parameters.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel synergistic multi-scale modeling framework to predict micro- and meso-scale damage behaviors of 2D triaxially braided composite

Hongyong Jiang et al.

Summary: A novel synergistic multi-scale modeling framework is proposed to predict damage behaviors of 2D-triaxially braided composites, incorporating micro- and meso-scale coupling. The model considers internal stress and micro damage of constituent materials coupled with the stress and damage of tow, with initial effective elastic properties estimated by micro-mechanics models. The framework successfully predicts macro properties and damage modes of 2DTBC, revealing significant effects of micro fiber and matrix damage accumulations on the meso-scale damage of tows.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2022)

添加到收藏夹

Article Mechanics

An analytical nonlinear model for plain-woven composites under off-axis loads

Yanchao Wang et al.

Summary: An analytical model is proposed in this paper to describe the nonlinear behavior of a plain-woven composite. The model combines a discrete method with a three-phase micromechanical bridging model, and it can effectively simulate the behavior of the composite under complex load cases.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Multiscale modeling framework to predict the low-velocity impact and compression after impact behaviors of plain woven CFRP composites

Qiaoli Zhao et al.

Summary: A multiscale modeling framework is developed to study the low-velocity impact and compression after impact behaviors of plain woven carbon-fiber-reinforced-polymer (CFRP) composites. The study reveals that impact damages, especially intralaminar damages, can decrease the residual compressive strength of impacted woven composites.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Mechanics

A novel multiscale modeling strategy of the low-velocity impact behavior of plain woven composites

Yuliang Hou et al.

Summary: A novel multiscale modeling strategy is proposed to investigate the low-velocity impact behavior of plain woven composites. The study predicts damage initiation and evolution under various loading conditions at micro and mesoscale levels. Numerical simulations confirm delamination and matrix-based damages as prevailing failure modes.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Multiscale damage modelling of 3D woven composites under static and impact loads

S. Z. H. Shah et al.

Summary: This study introduces a multiscale progressive damage modelling methodology for 3D woven composites, which accurately simulates the damage response. The model combines global analysis with local damage response and has been validated through experiments on different composite materials to demonstrate its accuracy and efficiency.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Mechanical

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Guowei Zhou et al.

Summary: This study investigates the mechanical properties and damage behaviors of carbon/epoxy woven fabric composite under in-plane tension and compression using experiment and simulation. Different material constitutive laws are established for the three components, showing significantly different mechanical properties and damage evolutions based on loading conditions and initial geometry characteristics. The study reveals that a non-linear stress-strain curve with clear transition region and intensive damage in tension, while a quasi-linear behavior up to facture is observed in compression with little damage prior to final fracture.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Mechanics

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Guowei Zhou et al.

Summary: The study investigates the mechanical behaviors and damage evolutions of carbon/epoxy woven fabric composites with different geometries under tensile loading. It is found that the crimp ratio is a critical factor governing mechanical properties, with composites having smaller crimp ratios showing quasi-linear stress-strain curves with higher elastic modulus and strength. The study also reveals that regardless of fabric pattern, the elastic modulus, strength, and damage initiation are linearly correlated with the crimp ratio.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Acoustic emission characterization of tensile damage in 3D braiding composite shafts

Wenfeng Hao et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Materials Science, Composites

A novel mesoscopic progressive damage model for 3D angle-interlock woven composites

Tao Zheng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

On the impact failure behavior of triaxially braided composites subjected to metallic plate projectile

Zhenqiang Zhao et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale modelling of scaling effects in the impact response of plain woven composites

Z. W. Xu et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Experimental method and failure mechanisms investigation for out-of-plane shear fatigue behavior of 3D woven composites

Licheng Guo et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Mechanics

Multiscale modeling and failure analysis of an 8-harness satin woven composite

Zhengmao Yang et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Guowei Zhou et al.

POLYMER TESTING (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

A comprehensive review of characterization and simulation methods for thermo-stamping of 2D woven fabric reinforced thermoplastics

Youkun Gong et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Composites

Mechanical analysis of three-dimensional braided composites by using realistic voxel-based model with local mesh refinement

Guodong Fang et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Materials Science, Composites

A multiscale elasto-plastic damage model for the nonlinear behavior of 3D braided composites

Chunwang He et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue life reduction of GFRP composites due to delamination associated with the introduction of functional discontinuities

Naeim Akbari Shahkhosravi et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Prediction of non-linear mechanical behavior of shear deformed twill woven composites based on a multi-scale progressive damage model

Yeon-Taek Hwang et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Composites

A coupled FE-FFT multiscale method for progressive damage analysis of 3D braided composite beam under bending load

Guodong Fang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Mechanics

X-ray tomography and numerical study on low-velocity impact damages of three-dimensional angle-interlock woven composites

Wenjing Cao et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Micromechanical modelling of the overall response of plain woven polymer matrix composites

Y. H. Chen et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2019)

添加到收藏夹

Article Mechanics

Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact

Paul Turner et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Manufacturing

A multi-scale modeling framework for impact damage simulation of triaxially braided composites

Zhenqiang Zhao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Composites

In situ experimental investigation on the out-plane damage evolution of 3D woven carbon-fiber reinforced composites

Zhixing Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Composites

A coupled elastic-plastic damage model for the mechanical behavior of three-dimensional (3D) braided composites

Jingran Ge et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Mechanics

Dynamic response and research of 3D braided Carbon Fiber Reinforced Plastics subjected to ballistic impact loading

Yongqi Yang et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Civil

Multi-scale modelling of dynamic progressive failure in composite laminates subjected to low velocity impact

B. B. Liao et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile response of carbon-aramid hybrid 3D braided composites

Yuanyuan Zheng et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Mechanics

Progressive failure analysis of 2D woven composites at the meso-micro scale

Liang Wang et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Review Mechanics

Failure analysis of composite laminate under low-velocity impact based on micromechanics of failure

Xiaofei Lou et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Materials Science, Composites

Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates

R. D. B. Sevenois et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Mechanics

Interior strain analysis of a woven composite beam using X-ray computed tomography and digital volumetric speckle photography

Lingtao Mao et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Progressive damage simulation of triaxially braided composite using a 3D meso-scale finite element model

Chao Zhang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mechanics

Dynamic Response of Orthogonal Three-Dimensional Woven Carbon Composite Beams Under Soft Impact

P. Turner et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2015)

添加到收藏夹

Article Mechanics

Mechanical modelling of 3D woven composites considering realistic unit cell geometry

S. D. Green et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

Cluster analysis of acoustic emission signals for 2D and 3D woven glass/epoxy composites

Li Li et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Mechanics

Static compressive strength prediction of open-hole structure based on non-linear shear behavior and micro-mechanics

Wangnan Li et al.

MECHANICS OF TIME-DEPENDENT MATERIALS (2014)

添加到收藏夹

Review Engineering, Multidisciplinary

Review and comparative study of analytical modeling for the elastic properties of textile composites

Ali Hallal et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Progressive damage analysis and strength prediction of 2D plain weave composites

Yuan Zhou et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Composites

Strength prediction of triaxially loaded composites using a progressive damage model based on micromechanics of failure

Yuanchen Huang et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Mechanics

Modeling techniques for predicting the mechanical properties of woven-fabric textile composites: a Review

A. Dixit et al.

MECHANICS OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Mechanics

Investigation on the compressive properties of the three dimensional four-directional braided composites

Guodong Fang et al.

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formulation of a unit cell of a reduced size for plain weave textile composites

S. Li et al.

COMPUTATIONAL MATERIALS SCIENCE (2011)

添加到收藏夹

Article Engineering, Manufacturing

Experimental characterization of high-speed impact damage behavior in a three-dimensionally woven SiC/SiC composite

Keiji Ogi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Materials Science, Composites

Assessment of fatigue damage evolution in woven composite materials using infra-red techniques

R. K. Fruehmann et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Composites

Micromechanics of Failure for Ultimate Strength Predictions of Composite Laminates

Sung Kyu Ha et al.

JOURNAL OF COMPOSITE MATERIALS (2010)

添加到收藏夹

Article Materials Science, Composites

Distribution of micro stresses and interfacial tractions in unidirectional composites

Kyo-Kook Jin et al.

JOURNAL OF COMPOSITE MATERIALS (2008)

添加到收藏夹

Article Materials Science, Composites

Micro-mechanics of failure (MMF) for continuous fiber reinforced composites

Sung Kyu Ha et al.

JOURNAL OF COMPOSITE MATERIALS (2008)

添加到收藏夹

Article Materials Science, Composites

Finite element analysis of damaged woven fabric composite materials

M Zako et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Mechanics

A new static failure criterion for isotropic polymers

H Altenbach et al.

MECHANICS OF COMPOSITE MATERIALS (2001)

添加到收藏夹

Article Engineering, Manufacturing

Textile composites: modelling strategies

SV Lomov et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)

添加到收藏夹

Article Materials Science, Composites

The mechanical properties of composites reinforced with woven and braided fabrics

ZM Huang

COMPOSITES SCIENCE AND TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.