☆ 4.7 Article

An enhanced boundary lubrication friction model for sheet metal forming

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Modeling structure-property relationships with convolutional neural networks: Yield surface prediction based on microstructure images

Julian N. Heidenreich et al.

Summary: The use of micromechanics and homogenization theory allows for predicting the effective mechanical properties of materials based on microstructural information. The microstructural information is encoded in images using convolutional neural networks (CNN), through which geometric information is reduced to ten characteristic features. A fully connected neural network model is introduced to predict the effective yield surfaces based on the encoded information, resulting in a computationally efficient CNN-FCNN model.

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

添加到收藏夹

Article Engineering, Mechanical

Does friction contribute to formability improvement using servo press?

Kali Prasad et al.

Friction (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quantitative Evaluation of Tool Wear in Cold Stamping of Ultra-High-Strength Steel Sheets

Junho Bang et al.

Summary: This study aims to develop a method for quantifying the wear of a sheet metal forming tool using experimental databases. A progressive die set is designed to conduct systematic wear tests, saving time and money. The study finds that analyzing the reasonable wear characteristics is appropriate and the proposed testing method can be used to reliably evaluate the wear lifetime of various tool materials.

METALS AND MATERIALS INTERNATIONAL (2023)

添加到收藏夹

Article Engineering, Mechanical

On the size distribution of truncation areas for fractal surfaces

Fei Shen et al.

Summary: A new size distribution law for the truncation areas of fractal surfaces is proposed in this study. The law is determined through numerical investigation of various rough surfaces and validated by fractal surface and realistic rough surface. The results show that the proposed law accurately reproduces the size distribution of the truncation areas for rough surfaces with a wide range of fractal parameters.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Article Engineering, Mechanical

Analysis of multiscale material removal mechanism in nanoparticle jet polishing

Jiahui Li et al.

Summary: This study presents an ultra-smooth surface polishing technology based on elastic material removal, and proposes a multiscale contact area analysis model to study the material removal process and predict the removal profile. The reliability of the model is verified through experiments, and the influence of experimental parameters on the material removal rate is explained.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Article Engineering, Mechanical

A novel fractal contact model based on size distribution law

Fei Shen et al.

Summary: This study develops a new fractal contact model to evaluate contact status on rough surfaces. It uses the three-dimensional Weierstrass-Mandelbrot function to characterize fractal surfaces and proposes a novel size distribution law of truncation regions. The model is able to calculate the contact force and real contact area by considering the asperity level range and the elastic or plastic deformation status of each asperity.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling the multiaxial fracture behavior of Ti-6Al-4V alloy sheets at a high temperature using improved damage modeling

Jinwoo Lee et al.

Summary: In this study, the mechanical responses and ductile damage behavior of Ti-6Al-4V alloy sheets at high temperature were investigated through experiments and numerical simulations. The improvement in formability at high temperature was also evaluated.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Engineering, Mechanical

Modeling crystal plasticity with an enhanced twinning-detwinning model to simulate cyclic behavior of AZ31B magnesium alloy at various temperatures

Hyuk Jong Bong et al.

Summary: In this study, a multiscale model was developed to predict the cyclic loading behaviors of a wrought magnesium alloy. The model accounted for temperature dependency and introduced the concept of variable residual twin fraction. The accuracy of the model was validated by comparing with experimental data.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental and modelling study of interaction between friction and galling under contact load change conditions

Xiao Yang et al.

Summary: The galling process in metal forming is still poorly understood, with material transfer affecting the friction coefficient and requiring consideration in finite element simulations. Dynamic balance between wear particle generation and ejection at the contact interface impacts the formation of the 'third body' abrasive element. Changes in contact load can disrupt and rebuild this dynamic balance, influencing the generation and ejection rate of the 'third body'.

FRICTION (2022)

添加到收藏夹

Article Engineering, Mechanical

Multiscale friction model for hot sheet metal forming

Jenny Venema et al.

Summary: The study extends the application of a multiscale friction model to the hot stamping process, considering factors such as tool and sheet metal surface topography. Through calibration experiments, the model relatively accurately predicts friction and is successfully applied in finite element simulations.

FRICTION (2022)

添加到收藏夹

Review Engineering, Mechanical

Numerical micro-texture optimization for lubricated contacts-A critical discussion

Max Marian et al.

Summary: Despite the amount of research conducted, the optimization strategies for micro-textures in lubricated tribo-contacts are still not well-established. Numerical approaches have the potential to design and optimize micro-textures to reduce friction and wear, contributing to improved energy efficiency and sustainability.

FRICTION (2022)

添加到收藏夹

Article Engineering, Mechanical

A probabilistic mean-field and microstructure based finite element modeling for predicting mechanical and ductile fracture behavior of the cast aluminum alloy

Woojin Jeong et al.

Summary: A multiscale finite element simulation approach based on the probabilistic mean-field method is proposed to predict the strength and ductile fracture of the cast aluminum alloy. The approach combines theoretical homogenization, Si particle cracking determination, and ductile fracture theory. Experimental measurements are used to apply the initial state information to the finite element model. The proposed approach accurately predicts the strength, fracture strain, and fracture propagation path under different stress states.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Incremental Tube Forming Process with a Novel Free Rotating Bearing Tool Tip: Experiment and FE Modeling with Anisotropic Plasticity Model

Hyung-Rim Lee et al.

Summary: In this study, a novel incremental tube forming (ITF) process is proposed to overcome the material loss issue in conventional forming processes. The new process successfully produces complex-profiled S-shaped tube components, and the feasibility of the process is confirmed through numerical analysis.

METALS AND MATERIALS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Efficient Wear Simulation Methodology for Predicting Nonlinear Wear Behavior of Tools in Sheet Metal Forming

Junho Bang et al.

Summary: This study aimed to develop an efficient wear simulation method to predict quantitative wear reasonably in reduced computational time without updating the geometry for succeeding iterations. By utilizing the scale factor representing the changes in wear properties with respect to wear depth as input, the simulation can capture the wear behavior and quickly predict the increase of wear depth without performing geometry updates.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental and theoretical studies on friction contact of bolted joint interfaces

Dongwu Li et al.

Summary: This paper presents experimental and theoretical modeling studies on the tangential contact stiffness and friction hysteresis of bolted joint interfaces under transversal vibration. A new test rig was developed to measure the interface fretting response of bolted joints. A multi-scale contact modeling method was proposed to calculate the tangential contact stiffness and reproduce the friction hysteresis of bolted joint interfaces. The effectiveness of the proposed method was verified by comparing the simulation results with the experimental counterparts in different cases of tangential loading.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigating the relationship of hardness and flow stress in metal forming

Andre Rudnytskyj et al.

Summary: This study aims to investigate the relationship between hardness and thermo-viscoplastic flow stress of materials used in metal forming processes. The experimental results show that there is no significant difference between bulk and surface in both 6061 and 6016 aluminum alloys. By developing a numerical model and using constitutive equations derived from compression tests, it is possible to describe the deformation at the surface level.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Probing the Mechanism of Friction Stir Welding with ALE Based Finite Element Simulations and Its Application to Strength Prediction of Welded Aluminum

Dongjoon Myung et al.

Summary: This study investigates the deformation mechanism in the friction stir welding process through simulation-based examination. The ALE formulation shows superior accuracy in predicting temperature profiles and distributions, while the coupling of temperature histories into the strength prediction model provides a more efficient tool for the design of the FSW process. The study also reveals the mechanism of the FSW process by examining the frictional and material flow behavior of the aluminum alloy in the welded zone.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Review Engineering, Mechanical

A Review on Friction and Lubrication in Automotive Metal Forming: Experiment and Modeling

Kijung Lee et al.

Summary: Metal forming processes are widely utilized across industries, including the automotive sector, with the traditional trial-and-error empirical approach now replaced by computational simulations. Finite element analysis is the most commonly employed numerical method in metal forming processes. Friction, a crucial parameter affecting the accuracy of numerical analysis, necessitates accurate friction models due to its complexity and difficulty in identification.

INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Recurrent neural network modeling of the large deformation of lithium-ion battery cells

Thomas Tancogne-Dejean et al.

Summary: A detailed three-dimensional unit cell model is developed to describe the large deformation response of Li-ion batteries, and a recurrent neural network (RNN) model, composed of two gated recurrent units in series with a deep fully connected network, is shown to accurately capture the large deformation response. Advanced conventional constitutive models such as the anisotropic Deshpande-Fleck model are unable to provide accurate predictions in comparison.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Engineering, Mechanical

Machine learning-based constitutive model for J2-plasticity

Dong Phill Jang et al.

Summary: This research proposes a machine learning-based constitutive model for predicting elastoplastic behavior under J2 plasticity, showing effectiveness in plastic loading by replacing the nonlinear stress-integration scheme in conventional theoretical models. Through element simulation and strain-path simulations, the ANN-based model demonstrates good agreement with conventional J2-based models in predicting results and offers advantages in computational efficiency.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Engineering, Mechanical

A novel multiscale model for contact behavior analysis of rough surfaces with the statistical approach

Hehe Kang et al.

Summary: This paper presents a contact model for rough interfaces with multiscale topographies, considering the coupling effect of macroscopic profile deviation and mesoscopic roughness. The model combines macro-, meso-, and microscopic topographies to establish a multiscale normal contact model, and uses the Jenkins element to express slip-stick behavior in the tangential model. Experimental validation and comparison with finite element models demonstrate the effectiveness of the proposed model for studying contact responses in rough interfaces with multiscale topographies.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

An enhanced distortional-hardening-based constitutive model for hexagonal close-packed metals: Application to AZ31B magnesium alloy sheets at elevated temperatures

Jinwoo Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

Predicting forming limit diagrams for magnesium alloys using crystal plasticity finite elements

Hyuk Jong Bong et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

Modeling of 3D plastic anisotropy and asymmetry of extruded magnesium alloy and its applications in three-point bending

Fei-Fan Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

A new method for distortion calculations in additive manufacturing: Contact analysis between a workpiece and clamps

Guoqing Chen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Validation of homogeneous anisotropic hardening model using non-linear strain path experiments

Shin-Yeong Lee et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Modeling differential permanent softening under strain-path changes in sheet metals using a modified distortional hardening model

Jinwoo Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Engineering, Mechanical

Effect of Anisotropic Plasticity on the Prediction of Formability of E-Form Magnesium Alloy Sheet

Yongheon Lee et al.

INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2019)

添加到收藏夹

Article Mechanics

Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending

Jisik Choi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Measurement and modeling of simple shear deformation under load reversal: Application to advanced high strength steels

J. S. Choi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Mechanical

Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets

Jeong-Yeon Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2015)

添加到收藏夹

Article Engineering, Mechanical

Multi-scale friction modeling for sheet metal forming: The boundary lubrication regime

J. Hol et al.

TRIBOLOGY INTERNATIONAL (2015)

添加到收藏夹

Article Engineering, Mechanical

Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect

Hyun-Ho Bok et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Engineering, Mechanical

Frictional Behaviors of a Mild Steel and a TRIP780 Steel Under a Wide Range of Contact Stress and Sliding Speed

Chongmin Kim et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2014)

添加到收藏夹

Article Engineering, Mechanical

Dislocation-based model for the prediction of the behavior of b.c.c. materials - Grain size and strain path effects

T. Carvalho Resende et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Engineering, Mechanical

Advanced Issues in springback

Robert H. Wagoner et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

添加到收藏夹

Article Engineering, Industrial

Formability prediction of advanced high strength steels using constitutive models characterized by uniaxial and biaxial experiments

Seoknyeon Kim et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Mechanical

Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction

Jin-Woo Lee et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

添加到收藏夹

Article Engineering, Mechanical

Advanced friction modeling for sheet metal forming

J. Hol et al.

WEAR (2012)

添加到收藏夹

Article Engineering, Mechanical

An alternative to kinematic hardening in classical plasticity

Frederic Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

添加到收藏夹

Article Engineering, Manufacturing

Advances in Sheet Forming-Materials Modeling, Numerical Simulation, and Press Technologies

M. G. Lee et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Contact Pressure Effect on Frictional Characteristics of Steel Sheet for Autobody

S. S. Han et al.

8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011), PTS A AND B (2011)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Zero Failure Production Methods Based on a Process Integrated Virtual Control

P. Hora et al.

8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011), PTS A AND B (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermo-mechanical finite element analysis incorporating the temperature dependent stress-strain response of low alloy steel for practical application to the hot stamped part

Hyun-Ho Bok et al.

METALS AND MATERIALS INTERNATIONAL (2010)

添加到收藏夹

Article Engineering, Mechanical

A load dependent friction model for fully plastic contact conditions

Xiao Ma et al.

WEAR (2010)

添加到收藏夹

Article Engineering, Manufacturing

TEMPERATURE DEPENDENT FRICTION MODELING FOR SHEET METAL FORMING

R. Grueebler et al.

INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coupling effects of hardening and damage on necking and bursting conditions in sheet metal forming

S Thibaud et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2004)

添加到收藏夹

Article Engineering, Mechanical

Plane stress yield function for aluminum alloy sheets - part 1: theory

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2003)

添加到收藏夹

Article Engineering, Mechanical

Effect of variable friction coefficient on sheet metal drawing

H Darendeliler et al.

TRIBOLOGY INTERNATIONAL (2002)

添加到收藏夹

Article Engineering, Mechanical

Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain

F Yoshida et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.