☆ 4.7 Article

Improvement of 3D printing performance of pea protein isolate Pickering emulsion gels by regulating electrostatic interaction between protein and polysaccharide

FOOD HYDROCOLLOIDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Applied

Development of fat-reduced 3D printed chocolate by substituting cocoa butter with water-in-oil emulsions

Siqi You et al.

Summary: This study developed a fat-reduced 3D printed chocolate by substituting cocoa butter with gum Arabic based water-in-oil emulsions. The optimized formulation for 3D printability had a ratio of cocoa butter, icing sugar, and cocoa powder of 2:1:2.5. Substituting cocoa butter with water-in-cocoa butter emulsions at different water/oil ratios resulted in a fat-reduced chocolate with desired characteristics.

FOOD HYDROCOLLOIDS (2023)

添加到收藏夹

Article Chemistry, Applied

Stability mechanism of Pickering emulsions co-stabilized by protein nanoparticles and small molecular emulsifiers by two-step emulsification with different adding sequences: From microscopic to macroscopic scales

Song Cui et al.

Summary: This study examined the possibility of improving the performance of Pickering emulsions by using a combination of colloidal particles and small molecular emulsifiers. The sequence of emulsifier addition significantly influenced the interfacial structure and properties of the emulsions. The Q-ZP addition sequence was found to be the most effective at forming stable Pickering emulsions with improved functional performance in food applications.

FOOD HYDROCOLLOIDS (2023)

添加到收藏夹

Article Chemistry, Applied

The rheological properties and stability of gelled emulsions applying to x-carrageenan and methyl cellulose as an animal fat replacement

Jiseon Lee et al.

Summary: This study investigated the effects of x-Car and MC on the characteristics and stability of gelled single and double emulsion. The results showed that the mixed system with x-Car and MC exhibited good stability under extreme temperature conditions.

FOOD HYDROCOLLOIDS (2023)

添加到收藏夹

Article Food Science & Technology

Pickering emulsion stabilized by modified pea protein-chitosan composite particles as a new fat substitute improves the quality of pork sausages

Chunqiang Li et al.

Summary: The effect of replacing 25%-100% pork backfat with Pickering emulsion stabilized by modified pea protein-chitosan composite particles on the quality of sausages was studied. The incorporation of Pickering emulsion enhanced the textural properties and micromorphology, as well as suppressed cooking loss and fat oxidation. The results suggest that Pickering emulsion is a potential fat substitute for meat products.

MEAT SCIENCE (2023)

添加到收藏夹

Review Chemistry, Applied

Improving 3D/4D printing characteristics of natural food gels by novel additives: A review

Yangyang Chen et al.

Summary: Additives in 3D/4D food printing can enhance the printing characteristics of natural food gels, including improving rheological, thermal, electrostatic, nutritional, and sensory properties. Three main types of additives – lipids, hydrocolloids, and carbohydrates – play a significant role in enhancing these printing characteristics.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Chemistry, Applied

Soy and whey protein isolate mixture/calcium chloride thermally induced emulsion gels: Rheological properties and digestive characteristics

Xiaoying Zhang et al.

Summary: This study presents the preparation and physicochemical properties of thermally induced emulsion gels of a soy protein isolate-whey protein isolate (SPI-WPI)/calcium chloride composite and analyzes their nutrient release behaviors using fat-soluble vitamin E. The results indicate that the SPI-WPI composite emulsion gel has better water-holding capacity and texture compared to the emulsion gels formed by single protein. The concentration of CaCl2 significantly influences the structure and mechanical properties of the SPI-WPI gel. Furthermore, the in vitro digestion experiments show that the mixed protein emulsion gel improves the bioavailability of vitamin E. This research is highly significant in the development of emulsion delivery systems for lipophilic nutrients and other health products.

FOOD CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Applied

High internal phase Pickering emulsions stabilized by cellulose nanocrystals for 3D printing

Tao Ma et al.

Summary: This study explored the utilization of highly concentrated oil-in-water emulsions to create edible 3D materials, successfully developing a high internal phase Pickering emulsion with excellent stability and printability. The research demonstrated the ability to 3D print high-resolution, high-fidelity shapes under specific conditions.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Chemistry, Applied

Food-grade Pickering emulsions and high internal phase Pickering emulsions encapsulating cinnamaldehyde based on pea protein-pectin-EGCG complexes for extrusion 3D printing

Tingting Feng et al.

Summary: Plant protein-based edible Pickering emulsions (PEs) and high internal phase PEs (HIPPEs) for 3D printing and flavor compounds delivery were studied. The proportion of cinnamaldehyde in the oil phase affected storage stability, rheological properties, and 3DP characteristics. PEs and HIPPEs with lower cinnamaldehyde proportions showed better stability and printability, with reduced flavor loss during processing.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Food Science & Technology

Food rheology applications of large amplitude oscillation shear (LAOS)

Yong Wang et al.

Summary: This review provides an update on the recent application of large amplitude oscillation shear (LAOS) for different types of foods. It discusses the common analytical tools used in food LAOS rheology and focuses on the use of LAOS for different food macro components, food formats, and categories. The review finds that different tools are suitable for analyzing different food components or categories. It concludes that LAOS rheological analysis of foods can provide a richer dimension than traditional small amplitude oscillation shear analysis, particularly in understanding the phase change processes of food ingredients and the effects of food processing on food structure.

TRENDS IN FOOD SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Food Science & Technology

Application of Protein in Extrusion-Based 3D Food Printing: Current Status and Prospectus

Ziang Guo et al.

Summary: This review discusses the functional properties and applications of protein raw materials in extrusion-based 3D food printing, highlighting the importance of protein in the development of future 3D food printing ink.

FOODS (2022)

添加到收藏夹

Article Chemistry, Applied

Investigation of the mechanism of casein protein to enhance 3D printing accuracy of cassava starch gel

Shengyang Ji et al.

Summary: Adding casein protein can improve the 3D printing performance of cassava starch gel, enhancing printing precision. Increasing cassava starch content can provide the gel system with a higher elastic modulus, but may reduce structural recovery.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Article Chemistry, Applied

High internal phase Pickering emulsion stabilized by sea bass protein microgel particles: Food 3D printing application

Lijuan Zhang et al.

Summary: This study investigated the physical and chemical properties of food-grade high internal phase Pickering emulsions (HIPPEs) stabilized by sea bass protein (SBP) microgel particles. The results showed that SBP microgel particles improved the environmental stability of HIPPEs and formed a three-dimensional network structure around oil droplets. The average particles size of HIPPEs decreased with the increased concentration of SBP microgel particles, and HIPPEs exhibited higher viscoelasticity, excellent recovery, and thixotropy. Encapsulation of HIPPEs improved the physical and chemical stability of astaxanthin, and the SBP microgel particles enhanced the bioaccessibility of astaxanthin. Three-dimensional printing experiments confirmed the potential of HIPPEs as a delivery vehicle for astaxanthin and as a 3D printing material for edible functional foods.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Chemistry, Applied

Development of soy protein isolate emulsion gels as extrusion-based 3D food printing inks: Effect of polysaccharides incorporation

Jie Yu et al.

Summary: This study investigates the use of soy protein isolate (SPI) emulsion gel inks mixed with guar gum (GG) or xanthan gum (XG) for 3D printing. The influence of polysaccharide type and concentration on the printability, rheological properties, and microstructure of the inks is discussed.

FOOD HYDROCOLLOIDS (2022)

添加到收藏夹

Article Nutrition & Dietetics

Formation and characterization of solid fat mimetic based on pea protein isolate/polysaccharide emulsion gels

Wenbo Hou et al.

Summary: In this study, emulsion gels that can be used as solid fat replacers were produced using different polysaccharides, pea protein isolate, and sunflower seed oil. The presence of polysaccharides improved the hardness, storage modulus, and resistance against deformation of the emulsion gel, while also affecting its microstructure and water holding capacity. Additionally, the unfolding of protein during gel formation was found to impact the gel's structure and properties.

FRONTIERS IN NUTRITION (2022)

添加到收藏夹

Article Chemistry, Applied

Rheological behavior of nanocellulose gels at various calcium chloride concentrations

Rui-jing Qu et al.

Summary: This study investigated the influence of calcium chloride (CaCl2) concentration on the properties of nanocellulose gels, showing that the absolute zeta potential decreased as CaCl2 concentration increased, leading to improved rheological properties. The enhanced gel network structure was attributed to the crosslinking promotion between nanocellulose by Ca2+ ions, demonstrating the tunability of rheological behavior by adjusting the concentration of CaCl2.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Engineering, Chemical

Effects of high oil compositions and printing parameters on food paste properties and printability in a 3D printing food processing model

Lingyi Liu et al.

Summary: The study investigated the effect of oil content on the printability of high-liquid-oil-content food pastes, finding that excessive whey protein isolate impaired printability, while corn starch had a more significant impact on storage modulus and loss modulus. Storing the pastes at 4 degrees Celsius for 24 hours improved printability.

JOURNAL OF FOOD ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Applied

Development of rheologically stable high internal phase emulsions by gelatin/chitooligosaccharide mixtures and food application

Hongxia Wang et al.

Summary: The modification of gelatin with chitooligosaccharide enhanced the rheological stability and structure of food-grade high internal phase emulsions (HIPEs), preventing droplet accumulation and enabling successful three-dimensional printing applications. This study has important implications for developing stable HIPEs for food applications and promoting rapid prototyping.

FOOD HYDROCOLLOIDS (2021)

添加到收藏夹

Article Chemistry, Applied

Construction of 3D printed reduced-fat meat analogue by emulsion gels. Part I: Flow behavior, thixotropic feature, and network structure of soy protein-based inks

Mahdiyar Shahbazi et al.

Summary: This study focuses on the development of reduced-fat emulsion gels using hydrophobically modified biosurfactants, which exhibited pseudoplastic behavior and good storage stability. Inks with higher ratios of biosurfactants showed better droplet dispersion and higher structural strength. The differences in flow behavior and emulsion stability were attributed to the molecular weight and radius of gyration of the biosurfactants.

FOOD HYDROCOLLOIDS (2021)

添加到收藏夹

Article Food Science & Technology

Large amplitude oscillatory shear (LAOS) for nonlinear rheological behavior of heterogeneous emulsion gels made from natural supramolecular gelators

Qing Li et al.

Summary: The rheological behaviors of emulsion gels made from natural glycyrrhizic acid nanofibrils and sitosterol-oryzanol mixtures were studied, showing different microstructures and linear/nonlinear viscoelastic behaviors depending on the concentration of sterols in the oil phase. The oil phase structuring by the sterols significantly enhanced the viscoelasticity of the emulsion gels, with percolating emulsion gels exhibiting higher elasticity than jammed emulsion gels. These findings could aid in designing novel emulsion gels with specific textural and functional properties for various applications.

FOOD RESEARCH INTERNATIONAL (2021)

添加到收藏夹

Article Biophysics

Probing gels and emulsions using large-amplitude oscillatory shear and frictional studies with soft substrate skin surrogates

Barbara Farias et al.

Summary: Water swellable crosslinked polymers, such as lightly-crosslinked hydrophobically modified polyacrylic acid, are commonly used in oil-in-water emulsions for their thickening properties. The rheological behavior of these polymers in emulsions was studied using small strain amplitude and large amplitude oscillatory shear experiments. The friction coefficient in tribology experiments was found to be dependent on the hydrophobicity of the substrate, polymer, and substrate roughness, providing insights for formulating skincare products with efficient lubrication properties.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

添加到收藏夹

Article Chemistry, Applied

Characteristics and application of fish oil-in-water pickering emulsions structured with tea water-insoluble proteins/κ-carrageenan complexes

Zhongyang Ren et al.

Summary: The study demonstrated that fish oil gels prepared using PEs stabilized by TWIP/KC mixtures exhibit improved stability and elasticity, making them suitable for real food manufacture. The addition of KC led to structural changes in TWIP, promoting enhanced emulsion stability.

FOOD HYDROCOLLOIDS (2021)

添加到收藏夹

Article Chemistry, Applied

Fabrication of polysaccharide-based high internal phase emulsion gels: Enhancement of curcumin stability and bioaccessibility

Jinyu Miao et al.

Summary: A simple approach using complexes of sugar beet pectin, tannic acid, and chitosan was developed to stabilize polysaccharide-based high internal phase emulsions (HIPEs). The stability and texture of the HIPEs were significantly improved by the formation of SBP/TA/CS complexes, which also delayed lipid digestion and improved curcumin bioaccessibility. These findings offer a useful method for designing HIPE-based soft solids from natural ingredients with potential applications in food and commercial products.

FOOD HYDROCOLLOIDS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Physicochemical Characterization of Pectin-Gelatin Biomaterial Formulations for 3D Bioprinting

Anna Lapomarda et al.

Summary: Developing biomaterial formulations suitable for 3D bioprinting of scaffolds is crucial in tissue engineering. The authors in this study expanded the library of biomaterial inks by blending pectin and gelatin. Utilizing a specific approach, the developed formulations showed promising potential for tissue regeneration.

MACROMOLECULAR BIOSCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Internal Phase Oil-in-Water Pickering Emulsions Stabilized by Chitin Nanofibrils: 3D Structuring and Solid Foam

Ya Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Applied

Nonlinear interfacial rheology and atomic force microscopy of air-water interfaces stabilized by whey protein beads and their constituents

Jack Yang et al.

FOOD HYDROCOLLOIDS (2020)

添加到收藏夹

Article Chemistry, Applied

Influence of interfacial compositions on the microstructure, physiochemical stability, lipid digestion and β-carotene bioaccessibility of Pickering emulsions

Yang Wei et al.

FOOD HYDROCOLLOIDS (2020)

添加到收藏夹

Article Agriculture, Multidisciplinary

Deciphering the Structural Network That Confers Stability to High Internal Phase Pickering Emulsions by Cross-Linked Soy Protein Microgels and Their In Vitro Digestion Profiles

Jiayu Wen et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Internal Phase Emulsion for Food-Grade 3D Printing Materials

Xiang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Biomedical

3D-printable supramolecular hydrogels with shear-thinning property: fabricating strength tunable bioink via dual crosslinking

Tian Hu et al.

BIOACTIVE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

Linking rheology and printability of a multicomponent gel system of carrageenan-xanthan-starch in extrusion based additive manufacturing

Zhenbin Liu et al.

FOOD HYDROCOLLOIDS (2019)

添加到收藏夹

Article Engineering, Chemical

Characterization of olive oil emulsions stabilized by flaxseed gum

Jian Sun et al.

JOURNAL OF FOOD ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Applied

Polysaccharide-based edible emulsion gel stabilized by regenerated cellulose

Yang Jiang et al.

FOOD HYDROCOLLOIDS (2019)

添加到收藏夹

Review Food Science & Technology

Pea protein isolates: Structure, extraction, and functionality

A. C. Y. Lam et al.

FOOD REVIEWS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Applied

Characterization of Pickering emulsion gels stabilized by zein/gum arabic complex colloidal nanoparticles

Lei Dai et al.

FOOD HYDROCOLLOIDS (2018)

添加到收藏夹

Article Chemistry, Applied

Effect of fish gelatin and gum arabic interactions on concentrated emulsion large amplitude oscillatory shear behavior and tribological properties

Mohammad Anvari et al.

FOOD HYDROCOLLOIDS (2018)

添加到收藏夹

Article Engineering, Chemical

Impact of rheological properties of mashed potatoes on 3D printing

Zhenbin Liu et al.

JOURNAL OF FOOD ENGINEERING (2018)

添加到收藏夹

Article Food Science & Technology

Investigation on lemon juice gel as food material for 3D printing and optimization of printing parameters

Fanli Yang et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Applied

H2O2 oxidative preparation, characterization and antiradical activity of a novel oligosaccharide derived from flaxseed gum

Shan Liang et al.

FOOD CHEMISTRY (2017)

添加到收藏夹

Article Food Science & Technology

The comparison of LAOS behavior of structured food materials (suspensions, emulsions and elastic networks)

Ozlem C. Duvarci et al.

TRENDS IN FOOD SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Review Food Science & Technology

3D printing: Printing precision and application in food sector

Zhenbin Liu et al.

TRENDS IN FOOD SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Applied

The analysis of the influence of xanthan gum and apple pectins on egg white protein foams using the large amplitude oscillatory shear method

Pawel Ptaszek et al.

FOOD HYDROCOLLOIDS (2016)

添加到收藏夹

Article Chemistry, Applied

Relationship of rheological and microstructural properties with physical stability of potato protein-based emulsions stabilized by guar gum

Jenifer Santos et al.

FOOD HYDROCOLLOIDS (2015)

添加到收藏夹

Article Food Science & Technology

Rheological properties of whey protein isolate stabilized emulsions with pectin and guar gum

Emine Alben Ercelebi et al.

EUROPEAN FOOD RESEARCH AND TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Chemical

Gelation properties of flaxseed gum

Hai-Hua Chen et al.

JOURNAL OF FOOD ENGINEERING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.