☆ 4.7 Article

Effect of Nb content on mechanical reinforcement of the Cu-10Fe composites

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of multi-scale ?-Fe reinforced Cu-Fe composite produced by vacuum suction casting

Yanjun Ding et al.

Summary: Cu-10Fe composites were produced by vacuum suction casting and traditional vacuum mold casting, and the evolution of their microstructure and properties during cold rolling and aging processes was analyzed. The suction-casted composite exhibited improved mechanical properties compared to the traditional mold-casted composite, with a microhardness of 146 HV, tensile strength of 526 MPa, and elongation of 23.7%. The higher softening temperature of the suction-casted composite (520 degrees C) was attributed to the refinement of the Cu matrix and the formation of multi-scale alpha-Fe particles through solute trapping during vacuum suction casting. The yield strength of the composites was mainly influenced by Orowan strengthening, refinement strengthening, and dislocations strengthening, contributing 31.1%, 25.8%, and 24.1%, respectively.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal

Jiajia Shen et al.

Summary: This study establishes a correlation between welding process, microstructure, and mechanical properties, laying the foundations for the successful joining and application of welded joints based on high entropy alloys using low-cost arc-based welding technologies.

SCRIPTA MATERIALIA (2023)

添加到收藏夹

Article Chemistry, Physical

Hierarchical microstructure and strengthening mechanism of Cu-36.8Fe alloy manufactured by selective laser melting

Yidi Li et al.

Summary: A near-full dense Cu-36.8Fe alloy was manufactured by selective laser melting, showing excellent mechanical performances due to the unique hierarchical microstructures. These findings provide insights for applying SLM technique to other immiscible alloys to design for higher mechanical performances.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of minor Ag addition on the microstructure and properties of powder metallurgy Cu-10 wt% Fe alloy

Ping Zhang et al.

Summary: This study systematically investigates the influence of minor Ag addition on the microstructure and properties of powder metallurgy Cu-10Fe alloy. The results show that minor Ag addition leads to a finer and more homogeneous distribution of Fe phase in Cu-10Fe-0.5Ag alloy. The improved microstructure of Cu-10Fe-0.5Ag alloy is attributed to the increased vacancy density in the Cu lattice and the reduced interface energy of Cu/Fe by Ag addition, resulting in an increased nucleation rate for the Fe phase. This microstructure is also beneficial for enhancing both the electrical conductivity and mechanical performance of the Cu-Fe-Ag alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain refinement and mechanical properties enhancement of Cu-10 wt%Fe alloys via Zr addition

Lang Ren et al.

Summary: The study found that the addition of Zr can refine the grain structure and improve mechanical properties in Cu-Fe alloys. This is because Zr forms ZrFe2 compound as nucleation substrate during solidification and additional precipitation of Cu4Zr and ZrFe2 occurs during aging process.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal

Jiajia Shen et al.

Summary: This study investigated the microstructural evolution and mechanical properties of gas metal arc welding of high entropy alloys using stainless steel as filler wire. While the addition of filler material did not increase the hardness of the fusion zone, it improved the yield and tensile strengths of the joint. This research provides a basis for promoting the application of gas metal arc welding of high entropy alloys for industrial use.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling

Meng Wang et al.

Summary: The study produced Cu-Fe alloy sheet using a process of double-melt mixed casting followed by cold rolling, resulting in significant reduction in thickness and remarkable enhancement in mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A multiphase strengthened Cu-Nb-Si alloy with high strength and high conductivity

Weiyang Wang et al.

Summary: A trade-off exists between high strength and high electrical conductivity in copper-based alloys. The study fabricated Cu-3.65 wt%Nb (CN) and Cu-3.48 wt%Nb-0.11 wt%Si (CNS) alloys and found that the precipitation of Nb and Nb3Si during aging treatment contributed to the high electrical conductivity of CNS alloy, while the tip of Nb3Si easily formed stress concentration leading to crack and failure. Thermal-mechanical treatment resulted in CN and CNS alloys with high strength, high electrical conductivity, and good elongation rates.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe alloy

Dawei Yuan et al.

Summary: The addition of Mg significantly improved the mechanical properties of the Cu-6.5Fe alloy while slightly reducing its conductivity. Observations and testing of the Cu-6.5Fe-0.3Mg alloy showed that the addition of Mg refined the Fe phase, inhibited dendrite segregation, promoted precipitation of the Fe phase, and effectively inhibited recrystallization of the Cu matrix.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Zr addition on metastable Liquid-Liquid Phase Separation of Cu-Fe alloys

Ho-Joon Moon et al.

Summary: Addition of Zr in Cu-Fe alloys was found to effectively activate γ-Fe nucleation and suppress liquid-liquid phase separation. A combination of thermal instrumental analysis and classical nucleation theory allowed for an effective assessment of LLPS behavior in Cu-Fe alloys.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Physical

Microstructure and properties of Cu-10 wt%Fe alloy produced by double melt mixed casting and multi-stage thermomechanical treatment

Meng Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties

Jongun Moon et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of carbon element on the formed microstructure in undercooled Cu-Fe-C alloys

Junting Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural, Mechanical, and Damping Properties of a Cu-Based Shape Memory Alloy Refined by an In Situ LaB6/Al Inoculant

Xiaojing liu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces

Y. F. Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Chemistry, Physical

A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements

Yeon Beom Jeong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy

Shichao Liu et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and Microstructure of In Situ CaB6-Al4Ca/Al Composite Inoculant Ribbon and Its Refining and Modifying Effect on Al-10Si-0.3Mg Alloy

Yijiao Sun et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Article Mathematics, Applied

Renormalized energy for dislocations in quasi-crystals

Lei Wu

NONLINEAR ANALYSIS-THEORY METHODS & APPLICATIONS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution during the liquid-liquid phase transformation of Al-Bi alloys under the effect of TiC particles

Qian Sun et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Rare-Earth Ce on Macrosegregation in Al-Bi Immiscible Alloys

Tiannan Man et al.

METALS (2016)

添加到收藏夹

Article Chemistry, Physical

Comparative study of the influence of Ag on the microstructure and mechanical properties of Cu-10Fe in situ composites

Yong Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Diffraction analysis of α-Fe precipitates in a polycrystalline Cu-Fe alloy

Qiyi Dong et al.

MATERIALS CHARACTERIZATION (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys

R. P. Shi et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Thermodynamics

Thermodynamic assessment of the Fe-Nb-V system

Alexandra V. Khvan et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Liquid-phase thermodynamics and structures in the Cu-Nb binary system

Liang Zhang et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes

S. A. Sajjadi et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nucleation determined microstructure formation in immiscible alloys

Jiuzhou Zhao et al.

MATERIALS LETTERS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.