相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fabrication of PCL/β-TCP scaffolds by 3D mini-screw extrusion printing
J. L. Davila et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Three-dimensional printing of cerium-incorporated mesoporous calcium-silicate scaffolds for bone repair
Min Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Fabrication of Highly Stretchable Conductors Based on 3D Printed Porous Poly(dimethylsiloxane) and Conductive Carbon Nanotubes/Graphene Network
Shasha Duan et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Electrically functional 3D-architectured graphene/SiC composites
Benito Roman-Manso et al.
CARBON (2016)
3D printing magnesium-doped wollastonite/β-TCP bioceramics scaffolds with high strength and adjustable degradation
Huifeng Shao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
3D printed microfluidic devices: enablers and barriers
Sidra Waheed et al.
LAB ON A CHIP (2016)
The upcoming 3D-printing revolution in microfluidics
Nirveek Bhattacharjee et al.
LAB ON A CHIP (2016)
3D printed anisotropic dielectric composite with meta-material features
D. V. Isakov et al.
MATERIALS & DESIGN (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
F. Castles et al.
SCIENTIFIC REPORTS (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
A 3D printable diamond polymer composite: a novel material for fabrication of low cost thermally conducting devices
U. Kalsoom et al.
RSC ADVANCES (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
James O. Hardin et al.
ADVANCED MATERIALS (2015)
Electrically conductive polycarbonate/carbon nanotube composites toughened with micron-scale voids
Xin Zhi et al.
CARBON (2015)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Superior mechanical and electrical properties of multiwall carbon nanotube reinforced acrylonitrile butadiene styrene high performance composites
Jeevan Jyoti et al.
COMPOSITES PART B-ENGINEERING (2015)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
High performance natural rubber composites with conductive segregated network of multiwalled carbon nanotubes
Neena George et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Electrical conductivity of 3D periodic architectured interpenetrating phase composites with carbon nanostructured-epoxy reinforcements
Diab W. Abueidda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten-Polycarbonate Polymer Matrix Composite for Space-Based Applications
Corey M. Shemelya et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Preparation and characterization of a newly developed polyamide composite utilising an affordable 3D printer
Tuan Noraihan Azila Tuan Rahim et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Fiber reinforcement during 3D printing
Susanne Christ et al.
MATERIALS LETTERS (2015)
3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications
Sophie C. Cox et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Additive manufacturing of multidirectional preforms for composites: opportunities and challenges
Zhenzhen Quan et al.
MATERIALS TODAY (2015)
3D printing of a multifunctional nanocomposite helical liquid sensor
Shuang-zhuang Guo et al.
NANOSCALE (2015)
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity
Minhong He et al.
SMALL (2015)
Fused filament 3D printing of ionic polymer-metal composites (IPMCs)
James D. Carrico et al.
SMART MATERIALS AND STRUCTURES (2015)
Three-Dimensional Printing of Antibiotics-Loaded Poly-ε-Caprolactone/Poly(Lactic-Co-Glycolic acid) Scaffolds for Treatment of Chronic Osteomyelitis
Jin-Hyung Shim et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)
Fractal dendrite-based electrically conductive composites for laser-scribed flexible circuits
Cheng Yang et al.
NATURE COMMUNICATIONS (2015)
Reinforcement of hydrogels using three-dimensionally printed microfibres
Jetze Visser et al.
NATURE COMMUNICATIONS (2015)
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Joshua J. Martin et al.
NATURE COMMUNICATIONS (2015)
3D-printed alginate/phenamil composite scaffolds constituted with microsized core-shell struts for hard tissue regeneration
KyoungHo Lee et al.
RSC ADVANCES (2015)
Self-assembled large scale metal alloy grid patterns as flexible transparent conductive layers
Melinda Mohl et al.
SCIENTIFIC REPORTS (2015)
Comparative Efficacies of a 3D-Printed PCL/PLGA/β-TCP Membrane and a Titanium Membrane for Guided Bone Regeneration in Beagle Dogs
Jin-Hyung Shim et al.
POLYMERS (2015)
3D-printed dimethyloxallyl glycine delivery scaffolds to improve angiogenesis and osteogenesis
Zhu Min et al.
BIOMATERIALS SCIENCE (2015)
3D printing of porous structures by UV-curable O/W emulsion for fabrication of conductive objects
I. Cooperstein et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Three-Dimensional Printing of Antibiotics-Loaded Poly-ε-Caprolactone/Poly(Lactic-Co-Glycolic acid) Scaffolds for Treatment of Chronic Osteomyelitis
Jin-Hyung Shim et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)
Electrospray Deposition of Energetic Polymer Nanocomposites with High Mass Particle Loadings: A Prelude to 3D Printing of Rocket Motors
Chuan Huang et al.
ADVANCED ENGINEERING MATERIALS (2015)
Near-Net-Shape Fabrication of Ti3SiC2-based Ceramics by Three-Dimensional Printing
Yuzhao Ma et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)
Conductive TiC/Ti-Cu/C composites fabricated by Ti-Cu alloy reactive infiltration into 3D-printed carbon performs
Carlos R. Rambo et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY
Wieslaw Kuczko et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2015)
Freestanding Graphene Paper Supported Three-Dimensional Porous Graphene-Polyaniline Nanoconnposite Synthesized by Inkjet Printing and in Flexible All-Solid-State Supercapacitor
Kai Chi et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Three-Dimensional Printing Fiber Reinforced Hydrogel Composites
Shannon E. Bakarich et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
3D Optical Printing of Piezoelectric Nanoparticle - Polymer Composite Materials
Kanguk Kim et al.
ACS NANO (2014)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Jason A. Inzana et al.
BIOMATERIALS (2014)
Studies on thermoplastic 3D printing of steel-zirconia composites
Uwe Scheithauer et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Chitosan-guar gum-silver nanoparticles hybrid matrix with immobilized enzymes for fabrication of beta-glucan and glucose sensing photometric flow injection system
Dipali R. Bagal-Kestwal et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2014)
Bioactivity Improvement of Forsterite-Based Scaffolds with nano-58S Bioactive Glass
Junjie Deng et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
Zuoxin Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Indirect three-dimensional printing of synthetic polymer scaffold based on thermal molding process
Jeong Hun Park et al.
BIOFABRICATION (2014)
3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia
Jianhua Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
High-resolution PLA-based composite scaffolds via 3-D printing technology
T. Serra et al.
ACTA BIOMATERIALIA (2013)
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Leon S. Dimas et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
LAS glass-ceramic scaffolds by three-dimensional printing
Andrea Zocca et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Optimization of TCP/HAP ratio for better properties of calcium phosphate scaffold via selective laser sintering
Cijun Shuai et al.
MATERIALS CHARACTERIZATION (2013)
Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting
Jan Wilkes et al.
RAPID PROTOTYPING JOURNAL (2013)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model
Solaiman Tarafder et al.
BIOMATERIALS SCIENCE (2013)
Additive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering
Dario Puppi et al.
BIOMEDICAL MICRODEVICES (2012)
Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds
Gary A. Fielding et al.
DENTAL MATERIALS (2012)
Sintering of 3D-Printed Glass/HAp Composites
Alexander Winkel et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres
Minwoo Park et al.
NATURE NANOTECHNOLOGY (2012)
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Simon J. Leigh et al.
PLOS ONE (2012)
Laser sintering of blended Al-Si powders
Eyitayo Olatunde Olakanmi et al.
RAPID PROTOTYPING JOURNAL (2012)
Recent advances in bone tissue engineering scaffolds
Susmita Bose et al.
TRENDS IN BIOTECHNOLOGY (2012)
Smart Soft Composite: An Integrated 3D Soft Morphing Structure Using Bend-Twist Coupling of Anisotropic Materials
Sung-Hoon Ahn et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
Direct-writing construction of layered meshes from nanoparticles-vaseline composite inks: rheological properties and structures
Kunpeng Cai et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
In vitro-Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds
Rainer Detsch et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2011)
Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders
E. O. Olakanmi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Large scale, highly conductive and patterned transparent films of silver nanowires on arbitrary substrates and their application in touch screens
Anuj R. Madaria et al.
NANOTECHNOLOGY (2011)
Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process
Subrata Kumar Ghosh et al.
MATERIALS & DESIGN (2011)
Enhanced biological and mechanical properties of well-dispersed nanophase ceramics in polymer composites: From 2D to 3D printed structures
Huinan Liu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
R. D. Goodridge et al.
POLYMER TESTING (2011)
Nano-TiO2-modified photosensitive resin for RP
Duan Yugang et al.
RAPID PROTOTYPING JOURNAL (2011)
Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
Bin Duan et al.
ACTA BIOMATERIALIA (2010)
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Christian Bergmann et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity
David W. Lipke et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Composites by rapid prototyping technology
S. Kumar et al.
MATERIALS & DESIGN (2010)
Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
Siddharth Ram Athreya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction
Stephan T. Becker et al.
ORAL ONCOLOGY (2009)
Structural determination of sildenafil and its analogues in dietary supplements by fast-atom bombardment collision-induced dissociation tandem mass spectrometry
Sungho Ahn et al.
RAPID COMMUNICATIONS IN MASS SPECTROMETRY (2009)
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fabienne C. Fierz et al.
BIOMATERIALS (2008)
Inkjet-printed electrochromic devices utilizing polyaniline-silica and poly(3,4-ethylenedioxythiophene)-silica colloidal composite particles
Goo Hwan Shim et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Smart Electronic Yarns and Wearable Fabrics for Human Biomonitoring made by Carbon Nanotube Coating with Polyelectrolytes
Bong Sup Shim et al.
NANO LETTERS (2008)
Inkjet printing of luminescent CdTe nanocrystal-polymer composites
Emine Tekin et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Inkjet printing of transparent, electrically conducting single-waited carbon-nanotube composites
William R. Small et al.
SMALL (2007)
Inkjet printed water sensitive transparent films from natural gum-carbon nanotube composites
Marc in het Panhuis et al.
SOFT MATTER (2007)
Fabrication of functionally graded materials via inkjet color printing
Jiwen Wang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Inkjet printing of electrically conductive patterns of carbon nanotubes
Krisztian Kordas et al.
SMALL (2006)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
Pore size and pore volume effects on alumina and TCP ceramic scaffolds
S Bose et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds
JM Taboas et al.
BIOMATERIALS (2003)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)