☆ 4.7 Article

Spray fabrication of additive-free electrodes for advanced Lithium-Ion storage technologies

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Cathodes Coating Layer with Li-Ion Diffusion Selectivity Employing Interactive Network of Metal-Organic Polyhedras for Li-Ion Batteries

You Jin Kim et al.

Summary: This study proposes a method to fabricate dual functional coating materials using metal-organic polyhedra (MOP) for stabilizing the surface of lithium-ion battery cathodes and facilitating ion diffusion. The results show that the MOPAC-coated Ni-rich layered cathode exhibits better cycle retention and enhanced kinetic properties compared to the pristine and MOP-coated cathodes.

SMALL (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced Electrochemical Performance of Rare-Earth Metal-Ion- Doped Nanocrystalline Li4Ti5O12 Electrodes in High-Power Li-Ion Batteries

A. Lakshmi-Narayana et al.

Summary: A comprehensive and comparative exploration research reveals the enhanced electrochemical performance of nanocrystalline RE-LTO electrodes in high-power Li-ion batteries, through the fundamental mechanisms of rare-earth metal-ion doping into Li4Ti5O12.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Exceeding Theoretical Capacity in Exfoliated Ultrathin Manganese Ferrite Nanosheets via Galvanic Replacement-Derived Self-Hybridization for Fast Rechargeable Lithium-Ion Batteries

Song Kyu Kang et al.

Summary: Mn3-xFexO4 nanosheets with interconnected conductive networks were synthesized, showing high reversible capacity and rate capability, which can overcome the theoretical limitations of conventional metal oxide materials and boost Li-ion storage capacity by surface alteration.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interconnected Metallic Membrane Enabled by MXene Inks Toward High-Rate Anode and High-Voltage Cathode for Li-Ion Batteries

Chuanfang (John) Zhang et al.

Summary: The increasing demand for advanced Li-ion batteries for smart electronics has led to the innovation of electrode additives. This study demonstrates the use of 2D titanium carbide (MXene) metallic membrane as a single-phase conductive binder for Li-ion battery anode and high-voltage cathodes. The binder-free electrodes show excellent rate performance and high reversible capacity, providing insights into the rational design of high-power density Li-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Progress and Prospects of Inorganic Solid-State Electrolyte-Based All-Solid-State Pouch Cells

Changhong Wang et al.

Summary: All-solid-state batteries have attracted global attention due to their exceptional safety and high energy density. Significant progress has been made in achieving high room-temperature ionic conductivity and good air stability of solid-state electrolytes (SSEs), addressing challenges at the electrode-electrolyte interface, and developing feasible manufacturing processes. Inorganic all-solid-state pouch cells have been extensively studied and demonstrated, revealing their potential for industrial application.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Improved electrochemical performance using well-dispersed carbon nanotubes as conductive additive in the Ni-rich positive electrode of lithium-ion batteries

Jae Hong Choi et al.

Summary: The researchers propose a strategy to fabricate the positive electrode with well-dispersed carbon nanotubes (CNTs), which improves the capacity retention and cycle ability of the battery. By controlling the solid content and sonication process, CNTs are evenly distributed in the electrode, leading to stable electrochemical performance.

ENVIRONMENTAL MODELLING & SOFTWARE (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Self-assembled carbon nanoribbons with the heteroatom doping used as ultrafast charging cathodes in zinc-ion hybrid supercapacitors

Yuying Li et al.

Summary: By doping carbon nanobelts with heteroatoms, researchers have fabricated aqueous zinc-ion hybrid supercapacitors (ZHSs) with superior performance. The heteroatom doping improves charge transport and generates numerous active sites, resulting in high specific capacitance, capacitance retention, and energy density.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Patterning Design of Electrode to Improve the Interfacial Stability and Rate Capability for Fast Rechargeable Solid-State Lithium-Ion Batteries

Minho Kim et al.

Summary: Patterned electrodes have been developed to improve fast-charging attributes in solid-state lithium-ion batteries by enhancing electrochemically activated surfaces within the electrodes. The study demonstrates the potential of patterned electrodes in improving electrode dynamics through customized empty channel structures and a composite electrolyte.

NANO LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Universal Spinning-Coordinating Strategy to Construct Continuous Metal-Nitrogen-Carbon Heterointerface with Boosted Lithium Polysulfides Immobilization for 3D-Printed Li-S Batteries

Yue Ouyang et al.

Summary: Constructing intimate coupling between transition metal and carbon nanomaterials is an effective means to achieve strong immobilization of lithium polysulfides in the applications of lithium-sulfur batteries. A universal spinning-coordinating strategy of constructing continuous metal-nitrogen-carbon heterointerface is reported and a proof of concept hybrid material is synthesized and used as an efficient sulfur host.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

High-Energy-Density Li-Ion Battery Reaching Full Charge in 12 min

Un-Hyuck Kim et al.

Summary: The expanding electric vehicle market has driven the demand for high-energy-density batteries. However, the operation of Ni-rich cathodes under extreme-fast-charging conditions compromises their structural integrity. This study introduces a high-energy-density cathode material with added Nb, which improves its microstructure and enables stable performance under fast-charging conditions.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Electrochemistry

Smart Multi-Layer Architecture Electrodes for High Energy Density Lithium-Ion Capacitors

Sang Ho Lee

Summary: Multi-layer architectures using complementary material combinations were developed to enhance the energy density and power performance of hybrid lithium-ion capacitors.

BATTERIES & SUPERCAPS (2022)

添加到收藏夹

Article Chemistry, Physical

Beyond flexible-Li-ion battery systems for soft electronics

Santanu Mukherjee et al.

Summary: The article discusses the need for strong energy storage sources in the wearable device field, and explores the reasons for using non-Li battery systems. Other Na, K, Ca, Al, Mg, Zn-ion battery systems have advantages such as high earth abundance, economic benefits, and low toxicity.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

The significance of aqueous binders in lithium-ion batteries

Niranjanmurthi Lingappan et al.

Summary: This study evaluates the pros and cons of traditional PVDF binders, investigates the correlation between PVDF and capacity loss, and explores the research progress of aqueous-based binders. Despite the widespread interest in aqueous binders across various topics, their efficiency for largely expandable silicon anodes is unsatisfactory, highlighting the need for the development of high-performance binders for future battery technology.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Chemistry, Physical

Multi-layered composite electrodes of high power Li4Ti5O12 and high capacity SnO2 for smart lithium ion storage

Sang Ho Lee et al.

Summary: Through discrete layering and optimized electrochemical behavior, a multi-layered composite electrode was utilized to explore new capacity-power combinations, showing remarkable rate capability and energy density in both lithium ion batteries and capacitors.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Stability of conductive carbon additives in 5 V-class Li-ion batteries

Seongjae Ko et al.

CARBON (2020)

添加到收藏夹

Article Chemistry, Physical

Role of Conductive Carbon in Porous Li-Ion Battery Electrodes Revealed by Electrochemical Impedance Spectroscopy Using a Symmetric Cell

Yuichi Itou et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Physical

Progress and challenges of flexible lithium ion batteries

Zhenhan Fang et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Energy & Fuels

Scalable Multilayer Printing of Graphene Interfacial Layers for Ultrahigh Power Lithium-Ion Storage

Sang Ho Lee et al.

ENERGY TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Co3O4Hollow Nanoparticles Embedded in Mesoporous Walls of Carbon Nanoboxes for Efficient Lithium Storage

Yi Huang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Review Chemistry, Physical

A Review of the Design of Advanced Binders for High-Performance Batteries

Feng Zou et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

High energy lithium ion capacitors using hybrid cathodes comprising electrical double layer and intercalation host multi-layers

Sang Ho Lee et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Layer-by-layer printing of multi-layered heterostructures using Li4Ti5O12 and Si for high power Li-ion storage

Sang Ho Lee et al.

NANO ENERGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Scalable, Large-Area Printing of Pore-Array Electrodes for Ultrahigh Power Electrochemical Energy Storage

Sang Ho Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Spray-Printed and Self-Assembled Honeycomb Electrodes of Silicon-Decorated Carbon Nanofibers for Li-Ion Batteries

Sang Ho Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach

Felix Hippauf et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Spray printing of self-assembled porous structures for high power battery electrodes

Sang Ho Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Electrochemistry

Spray printing and optimization of anodes and cathodes for high performance Li-Ion batteries

Sang Ho Lee et al.

ELECTROCHIMICA ACTA (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Composite with TiO2 and extension of discharge voltage range for capacity enhancement of a Li4Ti5O12 battery

Meng Ding et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Preparation of Ce- and La-Doped Li4Ti5O12 Nanosheets and Their Electrochemical Performance in Li Half Cell and Li4Ti5O12/LiFePO4 Full Cell Batteries

Meng Qin et al.

NANOMATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Facile Synthesis of Carbon-Coated Spinel Li4Ti5O12/Rutile-TiO2 Composites as an Improved Anode Material in Full Lithium-Ion Batteries with LiFePO4@N-Doped Carbon Cathode

Ping Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Encapsulating Sn Nanoparticles in Amorphous Carbon Nanotubes for Enhanced Lithium Storage Properties

Xiaosi Zhou et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Electrochemical performance of V-doped spinel Li4Ti5O12/C composite anode in Li-half and Li4Ti5O12/LiFePO4-full cell

Chun-Chen Yang et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Graphene-modified LiFePO4 cathode for lithium ion battery beyond theoretical capacity

Lung-Hao Hu et al.

NATURE COMMUNICATIONS (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates

Na Li et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)

添加到收藏夹

Article Chemistry, Physical

Improved Functionality of Lithium-Ion Batteries Enabled by Atomic Layer Deposition on the Porous Microstructure of Polymer Separators and Coating Electrodes

Yoon Seok Jung et al.

ADVANCED ENERGY MATERIALS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sequential Deposition of Integrated Cathode-Inorganic Separator-Anode Multilayers for High Performance Li-Ion Batteries

Jack D. Evans et al.

Summary: A porous, spray-deposited Al2O3-based separator was developed for direct deposition of electrode/separator/electrode Li-ion battery full cell assembly. The optimized sprayed separator showed high porosity, wettability, thermal stability, and ionic conductivity, leading to improved capacity retention in full cells compared to conventional separators.

ACS APPLIED MATERIALS & INTERFACES

添加到收藏夹

© Peeref 2019-2024. All rights reserved.