相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructural and Mechanical Properties of Al-Based Composites Reinforced with In-Situ and Ex-Situ Al2O3 Nanoparticles
Riccardo Casati et al.
ADVANCED ENGINEERING MATERIALS (2016)
Micromechanical characterisation of Ni/Al hybrid foams by nano- and microindentation coupled with EBSD
A. Jung et al.
ACTA MATERIALIA (2016)
Stabilisation of aluminium foams and films by the joint action of dispersed particles and oxide films
K. Heim et al.
ACTA MATERIALIA (2015)
An effective approach to reinforced closed-cell Al-alloy foams with multiwalled carbon nanotubes
Isabel Duarte et al.
CARBON (2015)
Ballistic performance of composite metal foams
Matias Garcia-Avila et al.
COMPOSITE STRUCTURES (2015)
Static and dynamic axial crush performance of in-situ foam-filled tubes
Isabel Duarte et al.
COMPOSITE STRUCTURES (2015)
Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests
Biao Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
On the mechanical anisotropy of the compressive properties of aluminium perlite syntactic foam
M. A. Sulong et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Manufacturing and bending behaviour of in situ foam-filled aluminium alloy tubes
Isabel Duarte et al.
MATERIALS & DESIGN (2015)
Quasi-static and high strain rates compressive response of iron and Invar matrix syntactic foams
Dung D. Luong et al.
MATERIALS & DESIGN (2015)
Dynamic properties of alumina hollow particle filled aluminum alloy A356 matrix syntactic foams
Luca Licitra et al.
MATERIALS & DESIGN (2015)
A novel approach to obtain in-situ growth carbon nanotube reinforced aluminum foams with enhanced properties
Jiwei Wang et al.
MATERIALS LETTERS (2015)
Enhancement of the mechanical strength of aluminum foams by SiC nanoparticles
Y. Du et al.
MATERIALS LETTERS (2015)
A novel approach to prepare aluminium-alloy foams reinforced by carbon-nanotubes
Isabel Duarte et al.
MATERIALS LETTERS (2015)
ECAP consolidation of Al matrix composites reinforced with in-situ γ-Al2O3 nanoparticles
R. Casati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Pumice/aluminium syntactic foam
M. Taherishargh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Dynamic compressive loading of expanded perlite/aluminum syntactic foam
T. Fiedler et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Compressive properties and energy absorption of aluminum composite foams reinforced by in-situ generated MgAl2O4 whiskers
Cheng Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Neutrons attenuation on composite metal foams and hybrid open-cell Al foam
Shuo Chen et al.
RADIATION PHYSICS AND CHEMISTRY (2015)
Attenuation efficiency of X-ray and comparison to gamma ray and neutrons in composite metal foams
Shuo Chen et al.
RADIATION PHYSICS AND CHEMISTRY (2015)
Mechanical characterization of open cell aluminium foams reinforced by nickel electro-deposition
C. Devivier et al.
MATERIALS & DESIGN (2015)
Fabrication and characterization of closed-cell aluminum foams with different contents of multi-walled carbon nanotubes
Zan Zhang et al.
MATERIALS & DESIGN (2015)
Compressive behaviour of aluminium matrix syntactic foams reinforced by iron hollow spheres
Attila Szlancsik et al.
MATERIALS & DESIGN (2015)
Investigation of the mechanical behaviour of AISI 316L stainless steel syntactic foams at different strain-rates
L. Peroni et al.
COMPOSITES PART B-ENGINEERING (2014)
Compressive Properties of Metal Matrix Syntactic Foams in Free and Constrained Compression
Imre Norbert Orbulov et al.
JOM (2014)
Improvement of the mechanical and thermal characteristics of open cell aluminum foams by the electrodeposition of Cu
A. Antenucci et al.
MATERIALS & DESIGN (2014)
On the mechanical properties of heat-treated expanded perlite-aluminium syntactic foam
M. Taherishargh et al.
MATERIALS & DESIGN (2014)
Compressive properties of closed-cell aluminum foams with different contents of ceramic microspheres
Xingchuan Xia et al.
MATERIALS & DESIGN (2014)
Compressive behavior of aluminum/copper hybrid foams under high strain rate loading
Yi Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of annealing on the mechanical properties of nano-copper reinforced open-cell aluminum foams
Yi Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The Effect of In Situ Intermetallic Formation on Al-Sn Foaming Behavior
Lydia Y. Aguirre-Perales et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design
Hui Wei et al.
SCRIPTA MATERIALIA (2014)
Production and Properties of 316L Stainless Steel Cellular Materials and Syntactic Foams
Joerg Weise et al.
STEEL RESEARCH INTERNATIONAL (2014)
Metal Matrix Composites Reinforced by Nano-Particles-A Review
Riccardo Casati et al.
METALS (2014)
Dynamic and Thermal Properties of Aluminum Alloy A356/Silicon Carbide Hollow Particle Syntactic Foams
James Cox et al.
METALS (2014)
Light-Metal Foams - History of Innovation and Technological Challenges
John Banhart
ADVANCED ENGINEERING MATERIALS (2013)
Influence of Powder Size on Production Parameters and Properties of Syntactic Invar Foams Produced by Means of Metal Powder Injection Moulding
Joerg Weise et al.
ADVANCED ENGINEERING MATERIALS (2013)
Powder metallurgy Ti-TiC metal matrix composites prepared by in situ reactive processing of Ti-VGCFs system
Shufeng Li et al.
CARBON (2013)
Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates
Dung D. Luong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams
Nazim Mahmutyazicioglu et al.
JOURNAL OF MATERIALS RESEARCH (2013)
The compressive properties of closed-cell aluminum foams with different Mn additions
Xingchuan Xia et al.
MATERIALS & DESIGN (2013)
Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets
Sie Chin Tjong
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)
Nano-deposition on 3-D open-cell aluminum foam materials for improved energy absorption capacity
Wei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of various parameters on properties of composite steel foams under variety of loading rates
Afsaneh Rabiei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microarchitecture and compressive deformation behaviour of Al-alloy (LM13)-cenosphere hybrid Al-foam prepared using CaCO3 as foaming agent
D. P. Mondal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes
S. J. Yoo et al.
SCRIPTA MATERIALIA (2013)
Effects of porosity and pore size on the compressive properties of closed-cell Mg alloy foam
X. C. Xia et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2013)
Foaming behavior of powder metallurgical Al-Sn foams
Lydia Y. Aguirre-Perales et al.
ACTA MATERIALIA (2012)
Syntactic Iron Foams - On Deformation Mechanisms and Strain-Rate Dependence of Compressive Properties
Lorenzo Peroni et al.
ADVANCED ENGINEERING MATERIALS (2012)
Synergistic strengthening by load transfer mechanism and grain refinement of CNT/Al-Cu composites
Dong H. Nam et al.
CARBON (2012)
The effect of 0.4 wt.% Mn addition on the localized corrosion behaviour of zinc in a long-term experiment
Xiu-Ling Shang et al.
ELECTROCHIMICA ACTA (2012)
Effects of scandium additions on mechanical properties of cellular Al-based foams
Li Huang et al.
INTERMETALLICS (2012)
Dynamic compression behavior of cenosphere aluminum alloy syntactic foam
Manmohan Dass Goel et al.
MATERIALS & DESIGN (2012)
Titanium-cenosphere syntactic foam made through powder metallurgy route
D. P. Mondal et al.
MATERIALS & DESIGN (2012)
Compressive properties and energy absorption behavior of Al-Al2O3 composite foam synthesized by space-holder technique
Mostafa Alizadeh et al.
MATERIALS & DESIGN (2012)
Dynamic mechanical behavior of syntactic iron foams with glass microspheres
Lorenzo Peroni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Compressive properties of aluminium matrix syntactic foams
Imre Norbert Orbulov
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Synthesis of syntactic steel foam using mechanical pressure infiltration
G. Castro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Synthesis of syntactic steel foam using gravity-fed infiltration
G. Castro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Magnesium Matrix Composite Foams-Density, Mechanical Properties, and Applications
Nikhil Gupta et al.
METALS (2012)
Ti Matrix Syntactic Foam Fabricated by Powder Metallurgy: Particle Breakage and Elastic Modulus
Xiaobing Xue et al.
JOM (2011)
The High Strain Rate Compressive Response of Mg-Al Alloy/Fly Ash Cenosphere Composites
Dung D. Luong et al.
JOM (2011)
A study of Mg and Cu additions on the foaming behaviour of Al-Si alloys
H. -M. Helwig et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Relationship between Foam Stabilization and Physical Properties of Particles on Aluminum Foam Production
Kota Kadoi et al.
MATERIALS TRANSACTIONS (2011)
Foamability of MgAl2O4 (Spinel)-Reinforced Aluminum Alloy Composites
G. S. Vinod Kumar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Syntactic Iron Foams with Integrated Microglass Bubbles Produced by Means of Metal Powder Injection Moulding
Joerg Weise et al.
ADVANCED ENGINEERING MATERIALS (2010)
Compressive property and energy absorption characteristic of open-cell SiCp/AlSi9Mg composite foams
Yanru Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Deformation and energy absorption characteristic of Al2O3f/Zn-Al composite foams during compression
J. A. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Evaluation of modulus of elasticity of composite metal foams by experimental and numerical techniques
L. Vendra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Failure Modes and Influence of the Quasi-static Deformation Rate on the Mechanical Behavior of Sandwich Panels with Aluminum Foam Cores
Isabel Duarte et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2010)
Fabrication of Al-3.7 Pct Si-0.18 Pct Mg Foam Strengthened by AlN Particle Dispersion and its Compressive Properties
Yeong Hwan Song et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Bending Properties of Al-Steel and Steel-Steel Composite Metal Foams
Judith A. Brown et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries
Ali Alavi Nia et al.
THIN-WALLED STRUCTURES (2010)
Mechanical properties of hybrid nanocrystalline metal foams
B. A. Bouwhuis et al.
ACTA MATERIALIA (2009)
Microstructure and mechanical behavior of die casting AZ91D-Fly ash cenosphere composites
P. K. Rohatgi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Correlation between ceramic additions and compressive properties of Zn-22Al matrix composite foams
Jiaan Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Compressive response and energy absorption of foamed A359-Al2O3 particle composites
A. Daoud
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Compression properties of cellular AlCu5Mn alloy foams with wide range of porosity
Dong-Hui Yang et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Al matrix syntactic foam fabricated with bimodal ceramic microspheres
X. F. Tao et al.
MATERIALS & DESIGN (2009)
A comparison of composite metal foam's properties and other comparable metal foams
A. Rabiei et al.
MATERIALS LETTERS (2009)
Fatigue in aluminum-steel and steel-steel composite foams
Lakshmi Vendra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Compressive behavior of Al matrix syntactic foams toughened with Al particles
X. F. Tao et al.
SCRIPTA MATERIALIA (2009)
Effect of heat treatments on the mechanical behaviour of aluminium alloy foams
Francesca Campana et al.
SCRIPTA MATERIALIA (2009)
Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications
John Banhart et al.
ADVANCED ENGINEERING MATERIALS (2008)
Compressive behavior of SiCp/AlSi9Mg composite foams
Yanru Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Composite metal foams processed through powder metallurgy
B. P. Neville et al.
MATERIALS & DESIGN (2008)
Effect of Al2O3 short fiber on the compressive properties of Zn-22Al foams
Jiaan Liu et al.
MATERIALS LETTERS (2008)
Effects of strain rate and SiC particle on the compressive property of SiCp/AlSi9Mg composite foams
Sirong Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
The effects of Mn additions on the microstructure and mechanical properties of Al-Si-Cu casting alloys
J. Y. Hwang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Mechanical properties of reticulated aluminium foams with electrodeposited Ni-W coatings
Yuttanant Boonyongmaneerat et al.
SCRIPTA MATERIALIA (2008)
High strain rate compression of cenosphere-pure aluminum syntactic foams
Z. Y. Dou et al.
SCRIPTA MATERIALIA (2007)
A study on aluminum-steel composite metal foam processed by casting
Lakshmi J. Vendra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Mechanical response of Al matrix syntactic foams produced by pressure infiltration casting
L. P. Zhang et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Compressive behavior and damping property of ZA22/SiCp composite foams
Yu Sirong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Compression behaviors of cenosphere-pure aluminum syntactic foams
G. H. Wu et al.
SCRIPTA MATERIALIA (2007)
Effect of pore size and relative density on the mechanical properties of open cell aluminum foams
Jiang Bin et al.
SCRIPTA MATERIALIA (2007)
Failure mechanisms of closed-cell aluminum foam under monotonic and cyclic loading
E. Amsterdam et al.
ACTA MATERIALIA (2006)
Metal foams: Production and stability
John Banhart
ADVANCED ENGINEERING MATERIALS (2006)
SiC-particulate aluminum composite foams produced from powder compacts:: foaming and compression behavior
M. Guden et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Synthesis and characterization of high volume fraction Al-Al2O3 nanocomposite powders by high-energy milling
B. Prabhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of Y2O3 on the mechanical properties of open cell aluminum foams
NQ Zhao et al.
MATERIALS LETTERS (2006)
Effect of ceramic particle addition on the foaming behavior, cell structure and mechanical properties of P/M AlSi7 foam
S. Esmaeelzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Compressive characteristics of A356/fly ash cenosphere composites synthesized by pressure infiltration technique
PK Rohatgi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Synthesis-microstructure-mechanical properties-wear and corrosion behavior of an Al-Si (12%) - Flyash metal matrix composite
M Ramachandra et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Strengthening in carbon nanotube/aluminium (CNT/Al) composites
R George et al.
SCRIPTA MATERIALIA (2005)
A study on processing of a composite metal foam via casting
A Rabiei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Metal foams -: high temperature colloids -: Part I.: Ex situ analysis of metal foams
N Babcsán et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions
DK Balch et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Carbon nanotube composites
PJF Harris
INTERNATIONAL MATERIALS REVIEWS (2004)
Effects of TiB2 particle addition on the expansion, structure and mechanical properties of PM Al foams
AR Kennedy et al.
SCRIPTA MATERIALIA (2004)
SiC-particulate aluminum composite foams produced by powder compacts: Foaming and compression behavior
S Elbir et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Properties of heat-treated aluminium foams
D Lehmhus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Desorption of hydrogen from blowing agents used for foaming metals
F von Zeppelin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Development of a closed cell aluminum alloy foam with enhancement of the compressive strength
T Miyoshi et al.
MATERIALS TRANSACTIONS (2001)
The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams
AE Markaki et al.
ACTA MATERIALIA (2001)
Advances in the science and technology of carbon nanotubes and their composites: a review
ET Thostenson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Deformation and damping behaviors of foamed Al-Si-SiCp composite
MC Gui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
A study of aluminium foam formation - Kinetics and microstructure
I Duarte et al.
ACTA MATERIALIA (2000)
Scientific principles of making an alloying addition of scandium to aluminium alloys
VG Davydov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Effects of heat treatment on compressive properties of AZ91 Mg and SG91A Al foams with open-cell structure
Y Yamada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)