相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Janet R. Xavier et al.
ACS NANO (2015)
Silicon: The evolution of its use in biomaterials
J. R. Henstock et al.
ACTA BIOMATERIALIA (2015)
Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering
F. Obregon et al.
JOURNAL OF DENTAL RESEARCH (2015)
Evaluating 3D-Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Martha O. Wang et al.
ADVANCED MATERIALS (2015)
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Jason A. Inzana et al.
BIOMATERIALS (2014)
Bioactive and biodegradable silica biomaterial for bone regeneration
Shunfeng Wang et al.
BONE (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
New porous polycaprolactone-silica composites for bone regeneration
Clara E. Plazas Bonilla et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Enzyme-based biosilica and biocalcite: biomaterials for the future in regenerative medicine
Xiaohong Wang et al.
TRENDS IN BIOTECHNOLOGY (2014)
Evaluation of hydrogels for bio-printing applications
Sean V. Murphy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Jyrki Korpela et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
The Deep-Sea Natural Products, Biogenic Polyphosphate (Bio-PolyP) and Biogenic Silica (Bio-Silica), as Biomimetic Scaffolds for Bone Tissue Engineering: Fabrication of a Morphogenetically-Active Polymer
Xiaohong Wang et al.
MARINE DRUGS (2013)
In vitro cell-biological performance and structural characterization of selective laser sintered and plasma surface functionalized polycaprolactone scaffolds for bone regeneration
Simon Van Bael et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
David A. Zopf et al.
NEW ENGLAND JOURNAL OF MEDICINE (2013)
Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications
Tao Xu et al.
BIOFABRICATION (2013)
Bio-silica and bio-polyphosphate: applications in biomedicine (bone formation)
Xiaohong Wang et al.
CURRENT OPINION IN BIOTECHNOLOGY (2012)
Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds
Gary A. Fielding et al.
DENTAL MATERIALS (2012)
Stimulation of healing within a rabbit calvarial defect by a PCL/PLGA scaffold blended with TCP using solid freeform fabrication technology
Jin-Hyung Shim et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Jinku Kim et al.
BIOFABRICATION (2012)
Concise Review: Personalized Human Bone Grafts for Reconstructing Head and Face
Sarindr Bhumiratana et al.
STEM CELLS TRANSLATIONAL MEDICINE (2012)
α-Tricalcium phosphate: Synthesis, properties and biomedical applications
R. G. Carrodeguas et al.
ACTA BIOMATERIALIA (2011)
Computer-Aided Design and Manufacturing and Rapid Prototyped Nanoscale Hydroxyapatite/Polyamide (n-HA/PA) Construction for Condylar Defect Caused by Mandibular Angle Ostectomy
Jihua Li et al.
AESTHETIC PLASTIC SURGERY (2011)
Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds
Erin Yiling Teo et al.
BIOMATERIALS (2011)
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Szilvia Eosoly et al.
ACTA BIOMATERIALIA (2010)
Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
Bin Duan et al.
ACTA BIOMATERIALIA (2010)
Nanomaterials for in situ cell delivery and tissue regeneration
Andrew C. A. Wan et al.
ADVANCED DRUG DELIVERY REVIEWS (2010)
Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug-Release Matrices
Elke Vorndran et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Calvarial Reconstruction by Customized Bioactive Implant
F. A. Probst et al.
HANDCHIRURGIE MIKROCHIRURGIE PLASTISCHE CHIRURGIE (2010)
Nanostructured mesoporous silica matrices in nanomedicine
M. Vallet-Regi
JOURNAL OF INTERNAL MEDICINE (2010)
Customized Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering: design, fabrication, surface modification and sustained release of growth factor
Bin Duan et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
Printing of Titanium implant prototype
Florencia Edith Wiria et al.
MATERIALS & DESIGN (2010)
Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression
Kyobum Kim et al.
TISSUE ENGINEERING PART B-REVIEWS (2010)
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
M. Nakamura et al.
BIOFABRICATION (2010)
Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
Hung-Jen Yen et al.
BIOMEDICAL MICRODEVICES (2009)
Novel chitin/nanosilica composite scaffolds for bone tissue engineering applications
K. Madhumathi et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2009)
Blended PCL/PLGA scaffold fabrication using multi-head deposition system
Jong Young Kim et al.
MICROELECTRONIC ENGINEERING (2009)
Fabrication of bioactive glass-ceramic foams mimicking human bone portions for regenerative medicine
Alberto Rainer et al.
ACTA BIOMATERIALIA (2008)
3D Powder Printing of beta-Tricalcium Phosphate Ceramics Using Different Strategies
Elke Vorndran et al.
ADVANCED ENGINEERING MATERIALS (2008)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Garrett E. Ryan et al.
BIOMATERIALS (2008)
Hierarchically Mesoporous-Macroporous Bioactive Glasses Scaffolds for Bone Tissue Regeneration
Hui-suk Yun et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2008)
Bone substitutes and growth factors as an alternative/complement to autogenous bone for grafting in implant dentistry
Mats Hallman et al.
PERIODONTOLOGY 2000 (2008)
Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2008)
Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing
Uwe Gbureck et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Biocompatibility and osteogenesis of biomimetic nano-hydroxyapatite/polyamide composite scaffolds for bone tissue engineering
Huanan Wang et al.
BIOMATERIALS (2007)
3D printing of hydroxyapatite: Effect of binder concentration in pre-coated particle on part strength
R. Chumnanklang et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
Extracellular matrix formation and mineralization on a phosphate-free porous bioactive glass scaffold using primary human osteoblast (HOB) cells
Julian R. Jones et al.
BIOMATERIALS (2007)
Characterizing environmental factors that impact the viability of tissue-engineered constructs fabricated by a direct-write bioassembly tool
Cynthia M. Smith et al.
TISSUE ENGINEERING (2007)
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
P Miranda et al.
ACTA BIOMATERIALIA (2006)
Coating of VEGF-releasing scaffolds with bioactive glass for angiogenesis and bone regeneration
JK Leach et al.
BIOMATERIALS (2006)
Bioceramic granulates for use in 3D printing:: Process engineering aspects
St. H. Irsen et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2006)
How useful is SBF in predicting in vivo bone bioactivity?
T Kokubo et al.
BIOMATERIALS (2006)
Porous Ti6Al4V scaffold directly fabricating by rapid prototyping:: Preparation and in vitro experiment
JP Li et al.
BIOMATERIALS (2006)
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
B Leukers et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
Chitosan-alginate as scaffolding material for cartilage tissue engineering
ZS Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2005)
Allograft and alloplastic bone substitutes: A review of science and technology for the craniomaxillofacial surgeon
BL Eppley et al.
JOURNAL OF CRANIOFACIAL SURGERY (2005)
Autogenous bone grafts and bone substitutes - Tools and techniques: I. A 20,000-case experience in maxillofacial and craniofacial surgery
P Tessier et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2005)
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
S Michna et al.
BIOMATERIALS (2005)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Bioactive glass and hybrid scaffolds prepared by sol-gel method for bone tissue engineering
MM Pereira et al.
ADVANCES IN APPLIED CERAMICS (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Polymeric scaffolds for bone tissue engineering
XH Liu et al.
ANNALS OF BIOMEDICAL ENGINEERING (2004)
Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects
CK Chua et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)
Biomaterial challenges and approaches to stem cell use in bone reconstructive surgery
V Olivier et al.
DRUG DISCOVERY TODAY (2004)
Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography
B Dhariwala et al.
TISSUE ENGINEERING (2004)
The effect of rhBMP-2 on canine osteoblasts seeded onto 3D bioactive polycaprolactone scaffolds
B Rai et al.
BIOMATERIALS (2004)
Seeding techniques and scaffolding choice for tissue engineering of the temporomandibular joint disk
AJ Almarza et al.
TISSUE ENGINEERING (2004)
Hydrogels for tissue engineering: scaffold design variables and applications
JL Drury et al.
BIOMATERIALS (2003)
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
SJ Kalita et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
A three-dimensional osteochondral composite scaffold for articular cartilage repair
JK Sherwood et al.
BIOMATERIALS (2002)
Mechanical properties and in vitro cell compatibility of hydroxyapatite ceramics with graded pore structure
J Werner et al.
BIOMATERIALS (2002)
Colloidal inks for directed assembly of 3-D periodic structures
JE Smay et al.
LANGMUIR (2002)
Porous calcium polyphosphate scaffolds for bone substitute applications in vivo studies
MD Grynpas et al.
BIOMATERIALS (2002)
The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques
SF Yang et al.
TISSUE ENGINEERING (2002)
An improvement in sintering property of β-tricalcium phosphate by addition of calcium pyrophosphate
HS Ryu et al.
BIOMATERIALS (2002)
Alginate as a chondrocyte-delivery substance in combination with a non-woven scaffold for cartilage tissue engineering
WJCM Marijnissen et al.
BIOMATERIALS (2002)
Hydrogels for tissue engineering
KY Lee et al.
CHEMICAL REVIEWS (2001)
Porous calcium polyphosphate scaffolds for bone substitute applications - in vitro characterization
RM Pilliar et al.
BIOMATERIALS (2001)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)
Articular cartilage repair in rabbits by using suspensions of allogenic chondrocytes in alginate
E Fragonas et al.
BIOMATERIALS (2000)
分享论文
