Bending Properties of Anisotropic Conductive Films Assembled Chip-in-Flex Packages for Wearable Electronics Applications

In this paper, a chip-in-flex (CIF) assembly that has an excellent bending performance, including a minimum bending radius without a chip fracture and the capacity to withstand dynamic bending, is developed. Chip-on-flex (COF) and CIF assemblies are fabricated using anisotropic conductive films (ACFs) as interconnection materials. The COF package is composed of 40-mu m-thin silicon chips, ACF, and flexible substrates. The CIF package is fabricated by attaching a cover adhesive film and a polyimide film on the COF package to encapsulate the silicon chip. Through static bending tests, the optimal thickness of the cover adhesive film is established. The optimized CIF assembly allows a minimum bending radius of 4 mm without a chip fracture, while the chip in the COF assembly fractures at a bending radius of 10 mm. A finite-element analysis of the static bending test is performed to understand the internal stress state of the assemblies. A bending reliability test of the CIF package is also conducted at a bending radius of 7.5 mm for 160k cycles, by measuring the daisy-chain resistance during the test. The effect of the elastic modulus of the ACF resin on the fatigue endurance is investigated through the bending fatigue test. The higher modulus of the ACF resin resulted in excellent fatigue reliability with stable ACF joints showing neither delamination nor resin crazing after 160k cycles of bending.