相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Flexural strength of bidirectional hybrid epoxy composites reinforced by E glass and T700S carbon fibres
Chensong Dong et al.
COMPOSITES PART B-ENGINEERING (2015)
Damping of thermoset and thermoplastic flax fibre composites
F. Duc et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride
Tao Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Effect of hybrid carbon nanotube/short glass fiber reinforcement on the properties of polypropylene composites
N. Gamze Karsli et al.
COMPOSITES PART B-ENGINEERING (2014)
Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications
A. Atiqah et al.
COMPOSITES PART B-ENGINEERING (2014)
Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers
I. D. G. Ary Subagia et al.
COMPOSITES PART B-ENGINEERING (2014)
Mechanical properties of hybrid composites using finite element method based micromechanics
Sayan Banerjee et al.
COMPOSITES PART B-ENGINEERING (2014)
Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites
Hazizan Md Akil et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Investigations on the fabrication and the characterization of glass/epoxy, carbon/epoxy and hybrid composites used in the reinforcement and the repair of aeronautic structures
N. Guermazi et al.
MATERIALS & DESIGN (2014)
Review on Powder Injection Molding of Engineering Ceramics
Paul Rogers et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Hybridization effect on the mechanical properties of curaua/glass fiber composites
Jose Humberto Santos Almeida Junior et al.
COMPOSITES PART B-ENGINEERING (2013)
Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid composites
M. T. Isa et al.
COMPOSITES PART B-ENGINEERING (2013)
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
Yongli Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Improved photocatalytic activity of g-C3N4/TiO2 composites prepared by a simple impregnation method
C. Miranda et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2013)
Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
MATERIALS & DESIGN (2013)
Mechanical and electrical performance of Roystonea regia/glass fibre reinforced epoxy hybrid composites
Govardhan Goud et al.
BULLETIN OF MATERIALS SCIENCE (2012)
Analysis of Tensile Modulus of PP/Nanoclay/CaCO3 Ternary Nanocomposite Using Composite Theories
Yasser Zare et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Characterization of Luffa cylindrica Fibers and the Effect of Water Aging on the Mechanical Properties of Its Composite with Polyester
Yoldas Seki et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures
Jin Zhang et al.
MATERIALS & DESIGN (2012)
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
M. Jawaid et al.
CARBOHYDRATE POLYMERS (2011)
The production of flexible and transparent conductive films of carbon nanotube/graphene networks coordinated by divalent metal (Cu, Ca or Mg) ions
Yi-Tao Liu et al.
CARBON (2011)
Hybrid recycled glass fiber/wood flour thermoplastic composites: Manufacturing and mechanical characterization
Marco Valente et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Effect of surface microfibrillation of sisal fibre on the mechanical properties of sisal/aramid fibre hybrid composites
Lin Xin Zhong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Glass-basalt/epoxy hybrid composites for marine applications
V. Fiore et al.
MATERIALS & DESIGN (2011)
Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes
A. Godara et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Frictional Coefficient, Hardness, Impact Strength, and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid Composites
M. Ashok Kumar et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties
P. Noorunnisa Khanam et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Dynamic Mechanical and Dielectric Behavior of Banana-Glass Hybrid Fiber Reinforced Polyester Composites
Laly A. Pothan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Flexural and Compressive Properties of Bamboo and Glass Fiber-reinforced Epoxy Hybrid Composites
H. Raghavendra Rao et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Life cycle energy analysis of fiber-reinforced composites
Young S. Song et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Effect of glass fiber hybridization on properties of sisal fiber-polypropylene composites
Kasama Jarukumjorn et al.
COMPOSITES PART B-ENGINEERING (2009)
Processing technique and fiber orientation angle affecting the mechanical properties of E-glass fiber reinforced wood/PVC composites
S. Tungjitpornkull et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Polypropylene-Bamboo/Glass Fiber Hybrid Composites: Fabrication and Analysis of Mechanical, Morphological, Thermal, and Dynamic Mechanical Behavior
Sushanta K. Samal et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites
Sanjay K. Nayak et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Synthesis and pore analysis of aerogel-glass fiber composites by ambient drying method
Chang-Yeoul Kim et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2008)
Characterization of natural fiber surfaces and natural fiber composites
N. Sgriccia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates
Giovanni Belingardi et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
Mechanical properties and water sorption behavior of phenol-formaldehyde hybrid composites reinforced with banana fiber and glass fiber
Seena Joseph et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Fabrication of metal matrix composites by metal injection molding - A review
Hezhou Ye et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites
Christopher S. Grimmer et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Glass-fiber-reinforced wood/plastic composites
Ghaus M. Rizvi et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2008)
Experimental and finite element analysis on the performance of vacuum-assisted resin infused single scarf repairs
D. Tzetzis et al.
MATERIALS & DESIGN (2008)
Studies on the water absorption properties of short hemp-glass fiber hybrid polypropylene composites
Suhara Panthapulakkal et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
An experimental investigation of the bearing strength of weft-knitted 1 x 1 rib glass fiber composites
Mevlut Tercan et al.
COMPOSITE STRUCTURES (2007)
Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites - Mechanical, water absorption and thermal properties
Suhara Panthapulakkal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester composite
Sami Ben Brahim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Agro-hybrid composite: The effects on mechanical and physical properties of oil palm fiber (EFB)/glass hybrid reinforced polyester composites
H. P. S. Abdul Khalil et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Mechanical properties of palmyra/glass fiber hybrid composites
R. Velmurugan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Facilitating transcrystallization of polypropylene/glass fiber composites by imposed shear during injection molding
Ke Wang et al.
POLYMER (2006)
Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study
Masud S. Huda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites
B. Suresha et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Study on the mechanical properties of jute/glass fiber-reinforced unsaturated polyester hybrid composites: Effect of surface modification by ultraviolet radiation
Abdullah-Al-Kafi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Predicting the elastic modulus of natural fibre reinforced thermoplastics
Angelo G. Facca et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene-luffa fiber composites
H Demir et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Affordable composites using renewable materials
K Chandrashekhara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites
X Kornmann et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
The static and dynamic mechanical properties of banana and glass fiber woven fabric-reinforced polyester composite
LA Pothan et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Studies on the combined effect of injection temperature and fiber content on the properties of polypropylene-glass fiber composites
WN Ota et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Lignocellulose-based hybrid bilayer laminate composite: Part I - Studies on tensile and impact behavior of oil palm fiber-glass fiber-reinforced epoxy resin
ABA Hariharan et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Use of resin transfer molding simulation to predict flow, saturation, and compaction in the VARTM process
NC Correia et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Study on fabrication of BMC laminates based on unsaturated polyester resin reinforced by hybrid bamboo/glass fibers
TV Dieu et al.
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING (2004)
A review on pineapple leaf fibers, sisal fibers and their biocomposites
S Mishra et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2004)
Effect of fiber content and fiber treatment on flexural properties of sisal fiber/glass fiber hybrid composites
K John et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
Tensile properties of unsaturated polyester-based sisal fiber-glass fiber hybrid composites
K John et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
SV Joshi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Mechanical properties of poly(vinyl chloride)/wood flour/glass fiber hybrid composites
HH Jiang et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2003)
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
S Mishra et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Magnetic Fe2O3-Al2O3 composites prepared by a modified wet impregnation method
MA Karakassides et al.
JOURNAL OF MATERIALS CHEMISTRY (2003)
Relationship between dynamic mechanical properties and water absorption of unsaturated polyester and vinyl ester glass fiber composites
AN Fraga et al.
JOURNAL OF COMPOSITE MATERIALS (2003)
Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites
MM Thwe et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composites
LVJ Lassila et al.
BIOMATERIALS (2002)
Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates
G Belingardi et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2002)
A physically-based abrasive wear model for composite materials
GY Lee et al.
WEAR (2002)
Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites
MM Thwe et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Effects of fibre content and relative fibre-orientation on the solid particle erosion of GF/PP composites
NM Barkoula et al.
WEAR (2002)
A review on interface modification and characterization of natural fiber reinforced plastic composites
J George et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Production of metal matrix composite part by powder injection molding
NH Loh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Analysis of vacuum bag resin transfer molding process
MK Kang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
AK Mohanty et al.
COMPOSITE INTERFACES (2001)
On the rule of mixtures for the hardness of particle reinforced composites
HS Kim
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Compressive splitting response of glass-fiber reinforced unidirectional composites
SH Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites
SY Fu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)