相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries
P. -E. Delannoy et al.
JOURNAL OF POWER SOURCES (2015)
Latest advances in the manufacturing of 3D rechargeable lithium microbatteries
Stefania Ferrari et al.
JOURNAL OF POWER SOURCES (2015)
High-performance graphene/sulphur electrodes for flexible Li-ion batteries using the low-temperature spraying method
Pushpendra Kumar et al.
NANOSCALE (2015)
Recent developments and directions in printed nanomaterials
Hyung Woo Choi et al.
NANOSCALE (2015)
Recent Progress on Printed Flexible Batteries: Mechanical Challenges, Printing Technologies, and Future Prospects
Abhinav M. Gaikwad et al.
ENERGY TECHNOLOGY (2015)
A Stencil Printed, High Energy Density Silver Oxide Battery Using a Novel Photopolymerizable Poly(acrylic acid) Separator
Kyle Braam et al.
ADVANCED MATERIALS (2015)
Pilot-scale elaboration of graphite/microfibrillated cellulose anodes for Li-ion batteries by spray deposition on a forming paper sheet
D. Beneventi et al.
CHEMICAL ENGINEERING JOURNAL (2014)
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Chen Zhao et al.
ELECTROCHEMISTRY COMMUNICATIONS (2014)
Performance improvements of pouch-type flexible thin-film lithium-ion batteries by modifying sequential screen-printing process
Kun-Young Kang et al.
ELECTROCHIMICA ACTA (2014)
Progress in flexible lithium batteries and future prospects
Guangmin Zhou et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Rapid charge and discharge property of high capacity lithium ion battery applying three-dimensionally patterned electrode
Akira Izumi et al.
JOURNAL OF POWER SOURCES (2014)
Development of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery
Zuoqian Wang et al.
JOURNAL OF POWER SOURCES (2014)
Laser-printing and femtosecond-laser structuring of LiMn2O4 composite cathodes for Li-ion microbatteries
J. Proell et al.
JOURNAL OF POWER SOURCES (2014)
Fully printed electronics on flexible substrates: High gain amplifiers and DAC
Joseph Chang et al.
ORGANIC ELECTRONICS (2014)
Conductive Nanomaterials for Printed Electronics
Alexander Kamyshny et al.
SMALL (2014)
Recent Advances in Design and Fabrication of Electrochemical Supercapacitors with High Energy Densities
Jun Yan et al.
ADVANCED ENERGY MATERIALS (2014)
An epidermal alkaline rechargeable Ag-Zn printable tattoo battery for wearable electronics
Sheela Berchmans et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Imprintable, Bendable, and Shape-Conformable Polymer Electrolytes for Versatile-Shaped Lithium-Ion Batteries
Eun-Hye Kil et al.
ADVANCED MATERIALS (2013)
Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors
Kang-Jun Baeg et al.
ADVANCED MATERIALS (2013)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
A flexible high potential printed battery for powering printed electronics
Abhinav M. Gaikwad et al.
APPLIED PHYSICS LETTERS (2013)
Roll-to-Roll fabrication of large area functional organic materials
Roar R. Sondergaard et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Flexible zinc-carbon batteries with multiwalled carbon nanotube/conductive polymer cathode matrix
Zhiqian Wang et al.
JOURNAL OF POWER SOURCES (2013)
All-solid-state lithium ion battery using garnet-type oxide and Li3BO3 solid electrolytes fabricated by screen-printing
Shingo Ohta et al.
JOURNAL OF POWER SOURCES (2013)
Reactive Inkjet Printing of Cathodes for Organic Radical Batteries
Tobias Janoschka et al.
ADVANCED ENERGY MATERIALS (2013)
Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications
Carlos M. Costa et al.
RSC ADVANCES (2013)
Printed electrically conductive composites: conductive filler designs and surface engineering
Cheng Yang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Inkjet printing of organic electronics - comparison of deposition techniques and state-of-the-art developments
Anke Teichler et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Flexible fiber-type zinc-carbon battery based on carbon fiber electrodes
Xiao Yu et al.
NANO ENERGY (2013)
Reinforced Electrode Architecture for a Flexible Battery with Paperlike Characteristics
Abhinav M. Gaikwad et al.
ENERGY TECHNOLOGY (2013)
Inkjet printing technology and conductive inks synthesis for microfabrication techniques
Mau Chien Dang et al.
ADVANCES IN NATURAL SCIENCES-NANOSCIENCE AND NANOTECHNOLOGY (2013)
Inkjet printing of conductive materials: a review
Gerard Cummins et al.
CIRCUIT WORLD (2012)
Development of high capacity lithium-ion battery applying three-dimensionally patterned electrode
Akira Izumi et al.
ELECTROCHIMICA ACTA (2012)
Reactive inkjet printing
Patrick J. Smith et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
A review of application of carbon nanotubes for lithium ion battery anode material
Charles de las Casas et al.
JOURNAL OF POWER SOURCES (2012)
Characterization and optimization of a printed, primary silver-zinc battery
Kyle T. Braam et al.
JOURNAL OF POWER SOURCES (2012)
Highly Flexible, Printed Alkaline Batteries Based on Mesh-Embedded Electrodes
Abhinav M. Gaikwad et al.
ADVANCED MATERIALS (2011)
Paper Electronics
Daniel Tobjork et al.
ADVANCED MATERIALS (2011)
Polymer electrolytes: Present, past and future
Vito Di Noto et al.
ELECTROCHIMICA ACTA (2011)
Flexible solid state lithium batteries based on graphene inks
Di Wei et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Transparent lithium-ion batteries
Yuan Yang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2011)
Thin, Flexible Secondary Li-Ion Paper Batteries
Liangbing Hu et al.
ACS NANO (2010)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
Design of 1.5 V thin and flexible primary batteries for battery-assisted passive (BAP) radio frequency identification (RFID) tag
Min Gyu Choi et al.
CURRENT APPLIED PHYSICS (2010)
Anodic behavior of zinc in Zn-MnO2 battery using ERDA technique
Manickam Minakshi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Improving Charge/Discharge Properties of Radical Polymer Electrodes Influenced Strongly by Current Collector/Carbon Fiber Interface
Sunao Yoshihara et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2010)
Programmable transdermal drug delivery of nicotine using carbon nanotube membranes
Ji Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
A super ink jet printed zinc-silver 3D microbattery
C. C. Ho et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Paper-based, printed zinc-air battery
M. Hilder et al.
JOURNAL OF POWER SOURCES (2009)
Printable electronics: flexibility for the future
Mark A. M. Leenen et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2009)
Flexible Electronics Sensors for Tactile Multi-Touching
Wen-Yang Chang et al.
SENSORS (2009)
Transdermal drug delivery
Mark R. Prausnitz et al.
NATURE BIOTECHNOLOGY (2008)
Electrochemical properties of LiCoO2 thin film electrode prepared by ink-jet printing technique
Junjie Huang et al.
THIN SOLID FILMS (2008)
Mechanical and electrical properties of a LiCoO2 cathode prepared by screen-printing for a lithium-ion micro-battery
Moon-Soo Park et al.
ELECTROCHIMICA ACTA (2007)
Transdermal drug delivery: principles and opioid therapy
Lyn Margetts et al.
BJA EDUCATION (2007)
Carbon nanotube based battery architecture
A. Kiebele et al.
APPLIED PHYSICS LETTERS (2007)
Flexible energy storage devices based on nanocomposite paper
Victor L. Pushparaj et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2007)
A microfabricated nickel-hydrogen battery using thick film printing techniques
Waiping G. Tam et al.
JOURNAL OF POWER SOURCES (2007)
A self-rechargeable and flexible polymer solar battery
G. Dennler et al.
SOLAR ENERGY (2007)
Planar miniature RFID antennas suitable for integration with batteries
Christopher T. Rodenbeck
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2006)
Characterization of a LiCoO2 thick film by screen-printing for a lithium ion micro-battery
Moon Soo Park et al.
JOURNAL OF POWER SOURCES (2006)
Electrochemical properties of LiCoO2 thick-film cathodes prepared by screen-printing technique
ST Lee et al.
JOURNAL OF POWER SOURCES (2006)
A novel and facile route of ink-jet printing to thin film SnO2 anode for rechargeable lithium ion batteries
YM Zhao et al.
ELECTROCHIMICA ACTA (2006)
Advanced materials for the 3D microbattery
D Golodnitsky et al.
JOURNAL OF POWER SOURCES (2006)
An energy-aware active smart card
R Tessier et al.
IEEE TRANSACTIONS ON VERY LARGE SCALE INTEGRATION (VLSI) SYSTEMS (2005)
Li4Ti5O12 as anode in all-solid-state, plastic, lithium-ion batteries for low-power applications
PP Prosini et al.
SOLID STATE IONICS (2001)