☆ 4.1 Article

On the effect of the poisson's ratio on samples subjected to shearing

ENGINEERING RESEARCH EXPRESS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Performance evaluation of peanut-shaped tubular auxetics with enhanced stiffness: a finite element study

Kemal Solak et al.

Summary: Auxetic materials exhibit unique deformation features and have enhanced mechanical properties compared to conventional materials. Peanut-shaped auxetic tubular structures have been studied, but their application is limited due to low stiffness. This study aims to enhance the stiffness of peanut-shaped auxetic tubular structures by adding stiffeners or rotating the unit cell, and the effect on Poisson's ratio is investigated. Numerical simulations are conducted and show that both the Poisson's ratio and stiffness values are increased with the addition of stiffeners, and the stiffness values increase while the Poisson's ratio decreases with unit cell rotation.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2023)

添加到收藏夹

Article Instruments & Instrumentation

What it could feel like to press on an auxetic: effect of Poisson's ratio on the indenter

Daphne Attard et al.

Summary: Static finite-element simulations were conducted to investigate the behavior of a human finger-like indenter pressing upon a sample covered with a negative/zero/positive Poisson's protective layer. The results showed that when the material being indented had a comparable Young's modulus to the outer shell of the indenter, a very negative Poisson's ratio (NPR) resulted in more pronounced deformations and stresses within the indenter. Furthermore, it was found that pressing an auxetic material with a high NPR may feel more uncomfortable compared to materials of the same Young's modulus but with a conventional positive Poisson's ratio (PPR).

SMART MATERIALS AND STRUCTURES (2023)

添加到收藏夹

Article Instruments & Instrumentation

Multimaterial 4D printing with a tunable bending model

Ali Zolfagharian et al.

Summary: SMP-based functional structures can now be efficiently produced using 4D printing, thanks to advances in multi-material 3D printing technologies. The design strategy involves the use of variable thickness ratios in constructing composites with bilayer laminates, allowing for control of self-bending. Finite element simulations are employed to understand the processes of composite materials and accurately predict experimental results, reducing cost and development time.

SMART MATERIALS AND STRUCTURES (2023)

添加到收藏夹

Review Engineering, Multidisciplinary

Expansion potential of auxetic prosthetic skin grafts: a review

Vivek Gupta et al.

Summary: The expansion of conventional prosthetic skin grafts is insufficient for treating large and severe burn injuries. However, auxetic materials with negative Poisson's effect show potential for expanding prosthetic skin grafts and covering large burn injury sites. This review article summarizes the design and analysis of auxetic skin grafts, aiming to advance burn mitigation research and facilitate the development of prosthetic skin grafts for severe burns.

ENGINEERING RESEARCH EXPRESS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Auxetic properties of a tangram-inspired metamaterial

Teik-Cheng Lim

Summary: This paper explores a new type of anisotropic auxetic system composed of rotating rhombi and right triangles, inspired by tangram pieces. The Poisson's ratio is obtained through geometric analysis of the representative unit with prescribed boundary requirements. By assigning rotational stiffness to the hinges, the Young's modulus is determined by matching the potential energy stored in the spiral springs with the strain energy of the deformation for the homogenized continuum. The results show that the on-axes Poisson's ratio and dimensionless Young's moduli are determined by the shapes and separation angles of the rigid units, which in turn determine the size of the representative unit of the metamaterial.

ENGINEERING RESEARCH EXPRESS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Micro-Scale Auxetic Hierarchical Mechanical Metamaterials for Shape Morphing

K. K. Dudek et al.

Summary: In this paper, a novel hierarchical mechanical metamaterial is proposed that can exhibit a wide range of unusual auxetic behavior. The ability to control this behavior through geometric design parameters is demonstrated using experiments and computer simulations. The proposed structure is capable of shape morphing, making it suitable for various applications, including flexible electronics.

ADVANCED MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Auxetic Behavior and Other Negative Thermomechanical Properties from Rotating Rigid Units

James N. Grima-Cornish et al.

Summary: The article explores how ancient symmetrical esthetic artifacts have been transformed into functional auxetics through mechanisms in the field of mechanical metamaterials and architected materials. It focuses on the important role and various implementations of rotating rigid units at different scales of structure.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2022)

添加到收藏夹

Review Physics, Condensed Matter

Auxetic Materials for Personal Protection: A Review

Danish Tahir et al.

Summary: Life-changing illnesses and fatalities caused by inefficient personal protective clothing and equipment are increasing. The discrepancy between test standards, environmental conditions, and actual collisions is the reason why personal protection equipment and clothing have not reduced injuries in fields such as military and sports. Auxetic materials are suggested as a solution due to their unique properties. This review discusses the importance of auxetic materials in personal protection and explores possible improvements in protection products.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2022)

添加到收藏夹

Article Physics, Condensed Matter

Variable Dual Auxeticity of the Hierarchical Mechanical Metamaterial Composed of Re-Entrant Structural Motifs

Krzysztof K. Dudek et al.

Summary: A novel hierarchical mechanical metamaterial composed of re-entrant truss-lattice elements is proposed. It exhibits versatile extent of auxetic behavior depending on the thickness of its hinges. By controlling the deformation pattern, the system can exhibit significantly different bandgap formation, making it useful in the design of vibration dampers or sensors. The proposed metamaterial has potential applications in protective and biomedical devices.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2022)

添加到收藏夹

Article Medicine, General & Internal

Blisters and Calluses from Rowing: Prevalence, Perceptions and Pain Tolerance

Joseph N. Grima et al.

Summary: This study investigated the prevalence of dermatological issues (calluses and blisters) on rowers' hands, as well as their perceptions and pain tolerance. The results showed that most rowers considered calluses to be non-painful, while blisters were perceived as more painful. Blisters and calluses were mainly located on the lower parts of the fingers and the upper inner palms.

MEDICINA-LITHUANIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

An Unusual 3D Metamaterial with Zero Poisson's Ratio in Partial Directions

Xuan Chen et al.

Summary: A novel 3D structure with both ZPR and NPR is proposed by splicing the 2D parallelogram honeycomb structure orthogonally. The structure exhibits different Poisson's ratios in different directions, and its properties are verified through finite element simulation and experiments. This structure may have important applications in aerospace, biomedical, and other fields.

ADVANCED ENGINEERING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shear modulus of conventional and auxetic open-cell foam

Nejc Novak et al.

Summary: This study analyzed the shear moduli of conventional and auxetic open-cell polymer foams, finding that the measured shear moduli of auxetic foams were generally lower, and the calculated shear moduli were lower than the measured values.

MECHANICS OF MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Shearing Deformations of β-Cristobalite-Like Boron Arsenate

James N. Grima-Cornish et al.

Summary: The study focuses on the deformations of boron arsenate crystals under shear loading, using density functional theory simulations to investigate the auxetic properties in the (001) plane and deformations caused by shear loading.

SYMMETRY-BASEL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Auxetic, Partially Auxetic, and Nonauxetic Behaviour in 2D Crystals of Hard Cyclic Tetramers

Konstantin V. Tretiakov et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compression and shear behaviour of graded chiral auxetic structures

Nejc Novak et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Mechanics

Shear resistance of an auxetic chiral mechanical metamaterial

Shengguang Jin et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

添加到收藏夹

Article Physics, Condensed Matter

Shear Stiffness and Energy Absorption of Auxetic Open Cell Foams as Sandwich Cores

Hong Chun Cheng et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2019)

添加到收藏夹

Review Instruments & Instrumentation

Auxetic metamaterials and structures: a review

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2018)

添加到收藏夹

Article Instruments & Instrumentation

Behavior of auxetic structures under compression and impact forces

Chulho Yang et al.

SMART MATERIALS AND STRUCTURES (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review of Auxetic Materials for Sports Applications: Expanding Options in Comfort and Protection

Olly Duncan et al.

APPLIED SCIENCES-BASEL (2018)

添加到收藏夹

Article

Equivalent strain at large shear deformation: Theoretical, numerical and finite element analysis

Nima Pardis et al.

Journal of Applied Research and Technology (2017)

添加到收藏夹

Article Physics, Condensed Matter

Fabrication of Auxetic Foam Sheets for Sports Applications

Tom Allen et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2017)

添加到收藏夹

Review Nanoscience & Nanotechnology

Flexible mechanical metamaterials

Katia Bertoldi et al.

NATURE REVIEWS MATERIALS (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Three Decades of Auxetics Research - Materials with Negative Poisson's Ratio: A Review

Krishna Kumar Saxena et al.

ADVANCED ENGINEERING MATERIALS (2016)

添加到收藏夹

Review Engineering, Mechanical

Auxetic Cellular Materials - a Review

Nejc Novak et al.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2016)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

Auxetic Foams for Sport Safety Applications

Tom Allen et al.

IMPACT OF TECHNOLOGY ON SPORT VI' 7TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY, APCST2015 (2015)

添加到收藏夹

Article Engineering, Mechanical

Buckling and Vibration of Circular Auxetic Plates

Teik-Cheng Lim

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2014)

添加到收藏夹

Article Physics, Condensed Matter

A review of the manufacture, mechanical properties and potential applications of auxetic foams

Richard Critchley et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2013)

添加到收藏夹

Review Physics, Multidisciplinary

Metamaterials beyond electromagnetism

Muamer Kadic et al.

REPORTS ON PROGRESS IN PHYSICS (2013)

添加到收藏夹

Article Instruments & Instrumentation

Shear deformation in thick auxetic plates

Teik-Cheng Lim

SMART MATERIALS AND STRUCTURES (2013)

添加到收藏夹

Review Chemistry, Physical

Poisson's ratio and modern materials

G. N. Greaves et al.

NATURE MATERIALS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hexagonal Honeycombs with Zero Poisson's Ratios and Enhanced Stiffness

Joseph N. Grima et al.

ADVANCED ENGINEERING MATERIALS (2010)

添加到收藏夹

Article Materials Science, Composites

Transverse shear stiffness of thickness gradient honeycombs

C. Lira et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Physics, Condensed Matter

Poisson's ratio of simple planar 'isotropic' solids in two dimensions

Konstantin V. Tretiakov et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2007)

添加到收藏夹

Review Materials Science, Multidisciplinary

On auxetic materials

W Yang et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

Article Physics, Multidisciplinary

Non-chiral, molecular model of negative Poisson ratio in two dimensions

KW Wojciechowski

JOURNAL OF PHYSICS A-MATHEMATICAL AND GENERAL (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Severe plastic deformation: simple shear versus pure shear

VM Segal

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

添加到收藏夹

Article Engineering, Mechanical

On the transverse shear modulus of negative Poisson's ratio honeycomb structures

F Scarpa et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2000)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self expanding molecular networks

JN Grima et al.

CHEMICAL COMMUNICATIONS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.