☆ 4.5 Review

A systematic review and comparison of liquid-based cooling system for lithium-ion batteries

ETRANSPORTATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

A fast pre-heating method for lithium-ion batteries by wireless energy transfer at low temperatures

Rui Xiong et al.

Summary: A new method using an improved wireless charging system to obtain onboard AC power is developed, which heats the lithium-ion battery by high-frequency AC. Experimental results show that the battery can be heated from -20 degrees C to 0 degrees C in 142s with an average heating rate of about 8.5 degrees C/min using 85 kHz AC. This proposed heating system provides a fast heating solution for lithium-ion batteries in electric vehicles.

ETRANSPORTATION (2023)

添加到收藏夹

Article Energy & Fuels

Revealing particle venting of lithium-ion batteries during thermal runaway: A multi-scale model toward multiphase process

Gongquan Wang et al.

Summary: Safety issues posed by thermal runaway are hindering the growth of lithium-ion batteries. A comprehensive model covering the entire process of venting during thermal runaway has been proposed. The model includes the prediction of particle ejection, which previous models have neglected. Experimental measurements were used to validate the model's accuracy. The results showed consistent particle and gas ejections, providing new references for the thermal safety design of battery packs.

ETRANSPORTATION (2023)

添加到收藏夹

Article Thermodynamics

Thermal management analysis of li-ion battery-based on cooling system using dimples with air fins and perforated fins

Karim Egab et al.

Summary: High power performance of battery modules requires maintaining lower operating temperature and dissipating large amount of heat generated from chemical reactions, which can significantly reduce battery temperature and improve performance by using different shapes of heat sinks and dimple structures.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Energy & Fuels

Thermal performance of a liquid-immersed battery thermal management system for lithium-ion pouch batteries

Haitao Wang et al.

Summary: A novel liquid-immersed battery thermal management system (BTMS) was designed to address the issues of high temperature rise and large temperature difference in lithium-ion pouch batteries. Experimental results showed that proper immersion depth and flow rate could greatly improve the thermal management performance, effectively reducing the temperature and temperature difference of the batteries.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Three-Heat-Source Electro-Thermal Coupled Model for Fast Estimation of the Temperature Distribution of a Lithium-Ion Battery Cell

Zhechen Guo et al.

Summary: This article proposes a three-heat-source electro-thermal coupled model to quickly predict the temperature distribution in a battery cell. The parameters of the model are identified through experimental testing and parameterization. The results demonstrate that the proposed model can accurately estimate the temperature distribution of the battery cell.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Lightweight Multichannel Direct Contact Liquid-Cooling System and Its Optimization for Lithium-Ion Batteries

Zhechen Guo et al.

Summary: This study designs and optimizes a direct contact liquid-cooling system for the thermal management of lithium-ion battery modules. Through single-factor analysis and gray relational analysis, key variables affecting the system are identified. By establishing surrogate models and multiobjective optimization functions, the goals of high cooling efficiency and lightweight are achieved.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2022)

添加到收藏夹

Article Chemistry, Physical

A new cyclic carbonate enables high power/low temperature lithium-ion batteries

Yunxian Qian et al.

Summary: This study addresses the issue of poor performance of lithium-ion batteries at low temperatures by designing and synthesizing a double ethylene carbonate molecule as an electrolyte additive. The electrolyte reduces interphase thickness and impedance, enabling effective charging and discharging of the battery at sub-zero temperatures.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Expanding the low-temperature and high-voltage limits of aqueous lithium-ion battery

Zekai Ma et al.

Summary: A non-flammable hybrid electrolyte with a wide electrochemical stability window of 4.7 V and supporting fast ion transport at temperatures as low as -50 degrees C has been proposed, demonstrating high Coulombic efficiency in lithium-ion batteries at room temperature and remaining operational under extreme low temperatures.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

A novel heat dissipation structure based on flat heat pipe for battery thermal management system

Yueqi Wang et al.

Summary: The study focuses on the thermal performance and heat dissipation of batteries in flying cars. Flat heat pipe technology is proposed to solve the battery thermal issues, and its effectiveness is verified through experiments. The results show that the battery's maximum temperature occurs at the end of the takeoff stage, while the maximum temperature difference appears during the forward flight segment. With suitable heat dissipation structures and control methods for different discharge conditions and environmental factors, the battery's thermal performance can be improved.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Energy & Fuels

No thermal runaway propagation optimization design of battery arrangement for cell-to-chassis technology

Changyong Jin et al.

Summary: This paper investigates the design and integration of battery components in electric vehicles, proposing a new solution called the brick configuration, and validates its safety and effectiveness through thermal runaway propagation experiments.

ETRANSPORTATION (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Numerical investigation on thermal management system for lithium ion battery using phase change material

Aditya R. Bais et al.

Summary: Lithium ion batteries were developed to overcome the inherent problems of lead acid batteries. However, these batteries exhibit a high rate of temperature increment under higher discharge rates, which can lead to degradation of battery capacity or even fire. Battery Thermal Management System (BTMS), particularly phase change cooling utilizing Phase Change Material (PCM), is used to maintain battery temperature and improve battery performance. The current study analyzed a passive BTMS using RT-42 as PCM and concluded that a minimum thickness of 4 mm is necessary for effective temperature control of the battery cell.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Numerical Simulation of Cooling Plate Using K-Epsilon Turbulence Model to Cool Down Large-Sized Graphite/LiFePO4 Battery at High C-Rates

Satyam Panchal et al.

Summary: This study presents an analogous study of the velocity and temperature profiles inside microchannel cooling plates. The experimental work used heat flux sensors and the simulation work used a computational fluid dynamics (CFD) software. The results show that the temperature of the cooling plates increases as the charging-discharging rates and ambient temperature increase.

WORLD ELECTRIC VEHICLE JOURNAL (2022)

添加到收藏夹

Article Energy & Fuels

A coupled conjugate heat transfer and CFD model for the thermal runaway evolution and jet fire of 18650 lithium-ion battery under thermal abuse

Depeng Kong et al.

Summary: Thermal runaway is a safety concern for lithium-ion batteries. This study develops a numerical model to predict the temperature, pressure evolution, and jet fire of the battery, considering the effect of state of charge (SOC).

ETRANSPORTATION (2022)

添加到收藏夹

Article Energy & Fuels

Challenges and development of lithium-ion batteries for low temperature environments

Nan Piao et al.

Summary: In low-temperature environments, lithium-ion batteries face various challenges and limitations, which need to be addressed by increasing the inherent reactivity of the battery and improving the external reaction temperature to enhance reaction kinetics, as well as by implementing real-time temperature monitoring, optimizing charging protocols, and online lithium-plating monitoring for battery management. A systematic review of low-temperature LIBs is conducted to provide references for future research.

ETRANSPORTATION (2022)

添加到收藏夹

Article Thermodynamics

Optimization for Liquid Cooling Cylindrical Battery Thermal Management System Based on Gaussian Process Model

Wei Li et al.

Summary: This study investigated liquid-cooled battery thermal management systems for electric vehicles, comparing two cooling schemes and finding that the U-shaped channel can significantly reduce pressure drop. An optimization model using machine learning was implemented, resulting in a 26.67% decrease in cooling water velocity and a 24.18% decrease in pressure drop, contributing to a reduction in parasitic power. The proposed method provides valuable insights for designing liquid cooling systems for large-scale battery packs.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)

添加到收藏夹

Article Thermodynamics

Optimization of liquid cooling and heat dissipation system of lithium-ion battery packs of automobile

Huanwei Xu et al.

Summary: An optimization design framework is proposed to minimize the maximum temperature difference of automotive lithium battery pack, utilizing an adaptive ensemble of surrogate models based on an improved particle swarm optimization algorithm. The optimized scheme reduces the maximum temperature difference by 7.49% compared with the initial scheme, resulting in a more uniform temperature distribution of the lithium battery pack. The proposed framework has certain guiding significance for the liquid cooling design of the battery packs.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Thermally modulated lithium iron phosphate batteries for mass-market electric vehicles

Xiao-Guang Yang et al.

Summary: The development of thermally modulated LFP battery can provide adequate cruise range and extend the range through short recharges, eliminating range anxiety for electric vehicles. Designed to operate at a working temperature of around 60 degrees Celsius in any ambient condition, it promises to be an ideal powertrain for mass-market EVs. Furthermore, utilizing low surface area graphite presents an opportunity to prolong the lifespan of EVs to over two million miles.

NATURE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Developments in battery thermal management systems for electric vehicles: A technical review

Pranjali R. Tete et al.

Summary: In the era of sustainable energy revolution, battery storage has emerged as a crucial field, especially in the context of electric vehicles. Efficient energy storage and retrieval in batteries, along with the operating temperature of electric vehicle batteries, are vital for performance optimization. Various cooling systems, such as air, liquid, phase change material, heat pipe, and refrigeration methods, have been discussed in depth in recent experimental and numerical analyses of battery thermal management systems (BTMS).

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

A lightweight liquid cooling thermal management structure for prismatic batteries

Zhiguo Tang et al.

Summary: A novel lightweight battery thermal management system (BTMS) structure was developed, and numerical simulation demonstrated superior cooling effects of two designs with low weight ratios.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Chemistry, Applied

Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

Can Liao et al.

Summary: In this study, magnetron sputtering deposition technique was utilized to modify commercial polyimide separator, resulting in the formation of MSD-PI composite separator with high thermal stability and ionic conductivity, improving the performance of lithium-ion batteries in high-temperature environments.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Automation & Control Systems

A Relative State of Health Estimation Method Based on Wavelet Analysis for Lithium-Ion Battery Cells

Jun Xu et al.

Summary: This article proposes a novel relative SOH estimation method based on wavelet analysis, which can obtain the SOH differences for series-connected lithium-ion battery cells in the battery pack without calculating the SOH of each battery cell. Experimental results show that the estimation error of the rSOH is limited within 5%, demonstrating the effectiveness of the proposed method.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Article Automation & Control Systems

A Hybrid Self-Heating Method for Batteries Used at Low Temperature

Jun Xu et al.

Summary: A hybrid self-heating method (HSHM) for batteries used at low temperatures is proposed, featuring low cost, high temperature rise rate, and low energy loss. Experimental results show that HSHM heats batteries faster with less energy consumption, improving performance by 1.3 times compared to traditional methods.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Two-Layer Real-Time Optimization Control Strategy for Integrated Battery Thermal Management and HVAC System in Connected and Automated HEVs

Shuofeng Zhao et al.

Summary: This paper focuses on the battery thermal management system in electric vehicles and proposes a two-layer predictive control strategy to optimize energy consumption while maintaining battery safety and passenger comfort. The study demonstrates accurate temperature tracking and up to 10.47% energy savings in HVAC compared to baseline control strategies. The proposed framework also shows real-world implementation capability on a real-time vehicle emulator.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Experimental study and numerical simulation of a Lithium-ion battery thermal management system using a heat pipe

Atieh Alihosseini et al.

Summary: The study investigates a lithium-ion battery heat management system using a heat pipe, and experimentally explores its performance. The experimental results show that while increasing ambient temperature leads to a rise in battery surface temperature, the decrease in thermal resistance of the heat pipe moderates this effect and controls the battery surface temperature with forced convection, distributing temperature uniformly. The use of the heat pipe helps maintain more stable temperature conditions with lower fluctuations in consecutive battery cycles.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Review Energy & Fuels

Battery thermal management system based on the forced-air convection: A review

Peng Qin et al.

Summary: This paper reviews the developments on the application of forced-air convection into BTMS and summarizes the main optimization routes which include pure forced-air convection, combination with phase change material and heat pipe, and outlooks for future development.

ETRANSPORTATION (2021)

添加到收藏夹

Review Polymer Science

Carbon-Based Polymer Nanocomposite for High-Performance Energy Storage Applications

Samarjeet Singh Siwal et al.

POLYMERS (2020)

添加到收藏夹

Article Thermodynamics

Multi-objective optimization of a liquid cooled battery module with collaborative heat dissipation in both axial and radial directions

Zehua Zhu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Review Energy & Fuels

Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application

Pradeep Kumar et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Chemistry, Physical

Boosting chem-insertion and phys-adsorption in S/N co-doped porous carbon nanospheres for high-performance symmetric Li-ion capacitors

Dong Yan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Thermodynamics

A parametric study for optimization of minichannel based battery thermal management system

Z. An et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Review Thermodynamics

A critical review of battery thermal performance and liquid based battery thermal management

Weixiong Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Thermodynamics

Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system

Zhuangzhuang Shang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance of cylindrical Lithium-ion battery thermal management system based on air distribution pipe

Haobing Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement

Kai Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

A comprehensive analysis and optimization process for an integrated liquid cooling plate for a prismatic lithium-ion battery module

Siqi Chen et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the thermal performance of silicon cold plate for battery thermal management system

Xinxi Li et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Heat transfer characteristics of plug-in oscillating heat pipe with binary-fluid mixtures for electric vehicle battery thermal management

Aibo Wei et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Energy & Fuels

An improved electro-thermal battery model complemented by current dependent parameters for vehicular low temperature application

Jiangong Zhu et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance of lithium ion battery pack by using cold plate

Tao Deng et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Optimization of the detailed factors in a phase-change-material module for battery thermal management

Jingwen Weng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Thermal modeling of full-size-scale cylindrical battery pack cooled by channeled liquid flow

Wenjiong Cao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger

Lei Sheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Multi-objective optimization design of double-layered reverting cooling plate for lithium-ion batteries

Tao Deng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Thermal and electrochemical performance of a serially connected battery module using a heat pipe-based thermal management system under different coolant temperatures

Jialin Liang et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

A compact and lightweight liquid-cooled thermal management solution for cylindrical lithium-ion power battery pack

Yongxin Lai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

A comparative study on battery thermal management using phase change material (PCM)

Ashima Verma et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

添加到收藏夹

Article Energy & Fuels

Novel thermal management system using mist cooling for lithium-ion battery packs

Lip Huat Saw et al.

APPLIED ENERGY (2018)

添加到收藏夹

Review Thermodynamics

Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review

Yuanwang Deng et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery

Huaqiang Liu et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Heat and mass transfer modeling and assessment of a new battery cooling system

Maan Al-Zareer et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate

Tao Deng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

A novel phase change based cooling system for prismatic lithium ion batteries

Maan Al-Zareer et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Assessment of energy consumption and modeling of output energy for wheat production by neural network (MLP and RBF) and Gaussian process regression (GPR) models

Morteza Taki et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Chemistry, Physical

Numerical study on the thermal management system of a liquid metal battery module

Zhenlin Guo et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Review Chemistry, Physical

Electric vehicles batteries thermal management systems employing phase change materials

Lucia Ianniciello et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Computer Science, Information Systems

An Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application

Jianan Zhang et al.

IEEE ACCESS (2018)

添加到收藏夹

Article Thermodynamics

Investigation on thermal performance and pressure loss of the fluid cold-plate used in thermal management system of the battery pack

E. Jiaqiang et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Mechanisms for the evolution of cell variations within a LiNixCoyMnzO2/graphite lithium-ion battery pack caused by temperature non-uniformity

Xuning Feng et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Thermodynamics

Experimental study on the thermal management performance of phase change material coupled with heat pipe for cylindrical power battery pack

Jiateng Zhao et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

添加到收藏夹

Article Thermodynamics

A pseudo 3D electrochemical-thermal modeling and analysis of a lithium-ion battery for electric vehicle thermal management applications

Farid Bahiraei et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Investigation on the promotion of temperature uniformity for the designed battery pack with liquid flow in cooling process

Tianshi Zhang et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Comparison of different cooling methods for lithium ion battery cells

Dafen Chen et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Thermal management for high power lithium-ion battery by minichannel aluminum tubes

Chuanjin Lan et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling

Zhen Qian et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation on an integrated thermal management system with heat pipe heat exchanger for electric vehicle

Huiming Zou et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Mechanics

Turbulent heat transfer and pressure loss in a square channel with discrete broken V-rib turbulators

Promthaisong Pitak et al.

JOURNAL OF HYDRODYNAMICS (2016)

添加到收藏夹

Article Thermodynamics

Status and development of electric vehicle integrated thermal management from BTM to HVAC

Tianshi Zhang et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Article Thermodynamics

Investigation of power battery thermal management by using mini-channel cold plate

Yutao Huo et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Thermodynamics

The numerical investigation of nanofluid based cylinder battery thermal management using lattice Boltzmann method

Yutao Huo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Battery thermal management by boiling heat-transfer

R. W. van Gils et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

添加到收藏夹

Article Energy & Fuels

Thermal analysis of high-power lithium-ion battery packs using flow network approach

G. Karimi et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2014)

添加到收藏夹

Article Thermodynamics

Combined experimental and numerical study of thermal management of battery module consisting of multiple Li-ion cells

Fan He et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Chemistry, Physical

Influence of operating conditions on the optimum design of electric vehicle battery cooling plates

Anthony Jarrett et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Energy & Fuels

Performance assessment of thermal management systems for electric and hybrid electric vehicles

H. S. Hamut et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)

添加到收藏夹

Article Chemistry, Physical

Design optimization of electric vehicle battery cooling plates for thermal performance

Anthony Jarrett et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Article Chemistry, Physical

Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management

Vilayanur V. Viswanathan et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.