相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A Review of State-of-the-Art on Enabling Additive Manufacturing Processes for Precision Medicine
Atheer Awad et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2023)
A Review on Physicochemical Properties of Polymers Used as Filaments in 3D-Printed Tablets
AbdAlmonem Doolaanea et al.
AAPS PHARMSCITECH (2023)
3D printing technology: A new approach for the fabrication of personalized and customized pharmaceuticals
Muneeb Ullah et al.
EUROPEAN POLYMER JOURNAL (2023)
Selective Laser Sintering for printing pharmaceutical dosage forms
Atabak Ghanizadeh Tabriz et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2023)
The Application of Polymers in Fabricating 3D Printing Tablets by Fused Deposition Modeling (FDM) and The Impact on Drug Release Profile
Silvia Surini et al.
PHARMACEUTICAL SCIENCES (2023)
Three-dimensional (3D) printing of oral dental films (ODFs) using blended Compactcel® polymers through semi-solid extrusion (SSE) bioprinter
Rohit Bhawale et al.
Bioprinting (2023)
3D PRINTING: A REVIEW ON THE TRANSFORMATION OF ADDITIVE MANUFACTURING
ANJALI RAJORA et al.
International Journal of Applied Pharmaceutics (2022)
Combining lipid based drug delivery and amorphous solid dispersions for improved oral drug absorption of a poorly water-soluble drug
Georgia-Ioanna Nora et al.
JOURNAL OF CONTROLLED RELEASE (2022)
Inorganic Materials for Regenerative Medicine
T. Safronova
INORGANIC MATERIALS (2021)
Advances in powder bed fusion 3D printing in drug delivery and healthcare
Atheer Awad et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Emerging 3D printing technologies for drug delivery devices: Current status and future perspective
Jiawei Wang et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Selective Laser Sintering (SLS), a New Chapter in the Production of Solid Oral Forms (SOFs) by 3D Printing
Yanis A. Gueche et al.
PHARMACEUTICS (2021)
Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron
Nour Allahham et al.
PHARMACEUTICS (2020)
Development and Optimisation of Novel Polymeric Compositions for Sustained Release Theophylline Caplets (PrintCap) via FDM 3D Printing
Deck Khong Tan et al.
POLYMERS (2020)
3D printing for drug delivery and biomedical applications
Sarwar Beg et al.
DRUG DISCOVERY TODAY (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printing of a lithium-calcium-silicate crystal bioscaffold with dual bioactivities for osteochondral interface reconstruction
Lei Chen et al.
BIOMATERIALS (2019)
Evaluation of bone marrow stem cell response to PLA scaffolds manufactured by 3D printing and coated with polydopamine and type I collagen
Bruna Nunes Teixeira et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing
Camden A. Chatham et al.
PROGRESS IN POLYMER SCIENCE (2019)
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Atheer Awad et al.
PHARMACEUTICS (2019)
Fabrication and Evaluation of 3D Printed Poly(L-lactide) Scaffold Functionalized with Quercetin-Polydopamine for Bone Tissue Engineering
Shitian Chen et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Shaping the future: recent advances of 3D printing in drug delivery and healthcare
Sarah J. Trenfield et al.
EXPERT OPINION ON DRUG DELIVERY (2019)
Biomimetic 3D Printing of Hierarchical and Interconnected Porous Hydroxyapatite Structures with High Mechanical Strength for Bone Cell Culture
Xiaolei Song et al.
ADVANCED ENGINEERING MATERIALS (2019)
Synergistic effect of alginate/BMP-2/Umbilical cord serum-coated on 3D-printed PCL biocomposite for mastoid obliteration model
Chul Ho Jang et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)
Surface Modification of 3D Printed Polycaprolactone Constructs via a Solvent Treatment: Impact on Physical and Osteogenic Properties
Alicja Kosik-Koziol et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
A comprehensive review of recent developments in 3D printing technique for ceramic membrane fabrication for water purification
Hitesh Dommati et al.
RSC ADVANCES (2019)
Nanoscale Resolution 3D Printing with Pin-Modified Electrified Inkjets for Tailorable Nano/Macrohybrid Constructs for Tissue Engineering
Jeong In Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
3D Microcontact Printing for Combined Chemical and Topographical Patterning on Porous Cell Culture Membrane
Justyna Borowiec et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Fei Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
In vitro characterization of 3D printed scaffolds aimed at bone tissue regeneration
Joao C. Boga et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Incorporation of BMP-2 nanoparticles on the surface of a 3D-printed hydroxyapatite scaffold using an epsilon-polycaprolactone polymer emulsion coating method for bone tissue engineering
Beom-Su Kim et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Fabricating 3D printed orally disintegrating printlets using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
A 3D bioprinted in situ conjugated-co-fabricated scaffold for potential bone tissue engineering applications
Mduduzi N. Sithole et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application
Su A. Park et al.
JOURNAL OF BIONIC ENGINEERING (2018)
Three-dimensional printing and in vitro evaluation of poly(3-hydroxybutyrate) scaffolds functionalized with osteogenic growth peptide for tissue engineering
Sybele Saska et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Fabrication of micro/nanoporous collagen/dECM/silk-fibroin biocomposite scaffolds using a low temperature 3D printing process for bone tissue regeneration
Hyeongjin Lee et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
A novel layer-structured scaffold with large pore sizes suitable for 3D cell culture prepared by near-field electrospinning
Feng-Li He et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
3D-printed biphasic calcium phosphate scaffolds coated with an oxygen generating system for enhancing engineered tissue survival
Maria Touri et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering
Yongxiang Luo et al.
MATERIALS & DESIGN (2018)
Integrating 3D-printed PHBV/Calcium sulfate hemihydrate scaffold and chitosan hydrogel for enhanced osteogenic property
Xiangling Ye et al.
CARBOHYDRATE POLYMERS (2018)
Gelatin/PVA scaffolds fabricated using a 3D-printing process employed with a low-temperature plate for hard tissue regeneration: Fabrication and characterizations
Haeri Kim et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)
3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Anti-wetting behaviour of a superhydrophobic octadecyltrimethoxysilane blended PVDF/recycled carbon black composite membrane for enhanced desalination
Saikat Sinha Ray et al.
ENVIRONMENTAL SCIENCE-WATER RESEARCH & TECHNOLOGY (2018)
A New Bone Substitute Developed from 3D-Prints of Polylactide (PLA) Loaded with Collagen I: An In Vitro Study
Ulrike Ritz et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Comparison of solid, liquid and powder forms of 3D printing techniques in membrane spacer fabrication
Wen See Tan et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Ze-Xian Low et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
In situ delivery of rhBMP-2 in surface porous shape memory scaffolds developed through cryogenic 3D plotting
Chong Wang et al.
MATERIALS LETTERS (2017)
3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks
Yongxiang Luo et al.
MATERIALS LETTERS (2017)
Uniform hydrophobic electrospun nanofibrous layer composed of polysulfone and sodium dodecyl sulfate for improved desalination performance
Saikat Sinha Ray et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2017)
High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing
Alexander D. Graham et al.
SCIENTIFIC REPORTS (2017)
Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds
Ryan J. Mondschein et al.
BIOMATERIALS (2017)
Fabrication of Hierarchical Macroporous Biocompatible Scaffolds by Combining Pickering High Internal Phase Emulsion Templates with Three-Dimensional Printing
Ting Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Jie Wang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Microscale electrohydrodynamic printing of biomimetic PCL/nHA composite scaffolds for bone tissue engineering
Xiaoli Qu et al.
MATERIALS LETTERS (2016)
Development and characterization of 3D-printed feed spacers for spiral wound membrane systems
Amber Siddiqui et al.
WATER RESEARCH (2016)
Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control
Nikola Ristovski et al.
BIOINTERPHASES (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control
Nikola Ristovski et al.
BIOINTERPHASES (2015)
Selective Laser Melting of Polymer Powder - Part mechanics as function of exposure speed
Maximilian Drexler et al.
15TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP 15 (2015)
Impact of 3-D printed PLA- and chitosan-based scaffolds on human monocyte/macrophage responses: Unraveling the effect of 3-D structures on inflammation
Catarina R. Almeida et al.
ACTA BIOMATERIALIA (2014)
Calcium phosphate cements for bone substitution: Chemistry, handling and mechanical properties
Jingtao Zhang et al.
ACTA BIOMATERIALIA (2014)
The enhancement of bone regeneration by gene activated matrix encoding for platelet derived growth factor
Satheesh Elangovan et al.
BIOMATERIALS (2014)
The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability
Thomas Billiet et al.
BIOMATERIALS (2014)
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Jason A. Inzana et al.
BIOMATERIALS (2014)
Evolving guidelines in the use of topical nonsteroidal anti-inflammatory drugs in the treatment of osteoarthritis
Casilda M. Balmaceda
BMC MUSCULOSKELETAL DISORDERS (2014)
Influence of grain size and grain-size distribution on workability of granules with 3D printing
Sebastian Spath et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
3D printed porous media columns with fine control of column packing morphology
Conan Fee et al.
JOURNAL OF CHROMATOGRAPHY A (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Light-assisted direct-write of 3D functional biomaterials
Kolin C. Hribar et al.
LAB ON A CHIP (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
3D-Printed Biopolymers for Tissue Engineering Application
Xiaoming Li et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2014)
Fabrication and Characteristics of Chitosan Sponge as a Tissue Engineering Scaffold
Takeshi Ikeda et al.
BIOMED RESEARCH INTERNATIONAL (2014)
Durable superhydrophobic/superoleophilic PDMS sponges and their applications in selective oil absorption and in plugging oil leakages
Xia Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
High-resolution PLA-based composite scaffolds via 3-D printing technology
T. Serra et al.
ACTA BIOMATERIALIA (2013)
Novel processing of iron-manganese alloy-based biomaterials by inkjet 3-D printing
Da-Tren Chou et al.
ACTA BIOMATERIALIA (2013)
Cell(MC3T3-E1)-Printed Poly(ε-caprolactone)/Alginate Hybrid Scaffolds for Tissue Regeneration
HyeongJin Lee et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Effects of botulinum toxin A on fracture healing in rats: an experimental study
Adem Aydin et al.
JOURNAL OF ORTHOPAEDIC SCIENCE (2012)
Engineering three-dimensional cell mechanical microenvironment with hydrogels
Guoyou Huang et al.
BIOFABRICATION (2012)
Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering
Muwan Chen et al.
ACTA BIOMATERIALIA (2011)
Three-Dimensional Magnetic Assembly of Microscale Hydrogels
Feng Xu et al.
ADVANCED MATERIALS (2011)
The assembly of cell-encapsulating microscale hydrogels using acoustic waves
Feng Xu et al.
BIOMATERIALS (2011)
Fabrication of chitin-chitosan/nano ZrO2 composite scaffolds for tissue engineering applications
R. Jayakumar et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2011)
Harnessing and Modulating Inflammation in Strategies for Bone Regeneration
Paschalia M. Mountziaris et al.
TISSUE ENGINEERING PART B-REVIEWS (2011)
Controlled Positioning of Cells in Biomaterials-Approaches Towards 3D Tissue Printing
Silke Wust et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2011)
Porous tantalum structures for bone implants: Fabrication, mechanical and in vitro biological properties
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Differential Effect of Scaffold Shape on Dentin Regeneration
Akiko Tonomura et al.
ANNALS OF BIOMEDICAL ENGINEERING (2010)
Titanates deliver metal ions to human monocytes
John C. Wataha et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Engineering hydrogels as extracellular matrix mimics
Hikmet Geckil et al.
NANOMEDICINE (2010)
Directed assembly of cell-laden hydrogels for engineering functional tissues
Nezamoddin N. Kachouie et al.
ORGANOGENESIS (2010)
Visualizing 3D Objects From 2D Cross Sectional Images Displayed In-Situ Versus Ex-Situ
Bing Wu et al.
JOURNAL OF EXPERIMENTAL PSYCHOLOGY-APPLIED (2010)
Regional biomechanical and histological characterisation of the passive porcine urinary bladder: Implications for augmentation and tissue engineering strategies
Sotirios Korossis et al.
BIOMATERIALS (2009)
Synthesis and characterization of PEG-PCL-PEG thermosensitive hydrogel
ChangYang Gong et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
Pulsatile release of biomolecules from polydimethylsiloxane (PDMS) chips with hydrolytically degradable seals
Janjira Intra et al.
JOURNAL OF CONTROLLED RELEASE (2008)
Guided and fluidic self-assembly of microstructures using railed microfluidic channels
Su Eun Chung et al.
NATURE MATERIALS (2008)
Cell colonization in degradable 3D porous matrices
Benjamin J. Lawrence et al.
CELL ADHESION & MIGRATION (2008)
Dynamics of the self-assembly of complex cellular aggregates on micromolded nonadhesive hydrogels
Anthony P. Napolitano et al.
TISSUE ENGINEERING (2007)
Acetaminophen, like conventional NSAIDs, may reduce synovitis in osteoarthritic knees
Kenneth D. Brandt et al.
RHEUMATOLOGY (2006)
Fabrication and characterization of poly(propylene fumarate) scaffolds with controlled pore structures using 3-dimensional printing and injection molding
Kee-Won Lee et al.
TISSUE ENGINEERING (2006)
Porous scaffold design for tissue engineering
SJ Hollister
NATURE MATERIALS (2005)
The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis
HJ Sung et al.
BIOMATERIALS (2004)
Scaffolds for tissue fabrication
Peter X. Ma
MATERIALS TODAY (2004)
Scaffold development using 3D printing with a starch-based polymer
CXF Lam et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Synthesis and characterization of elastic PLGA/PCL/PLGA tri-block copolymers
SH Choi et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2002)
分享论文
