☆ 4.4 Article

Unveiling the Potential of Rice Straw Nanofiber-Reinforced HDPE for Biomedical Applications: Investigating Mechanical and Tribological Characteristics

JOURNAL OF FUNCTIONAL BIOMATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Incorporation of graphene nanoplatelets/hydroxyapatite in PMMA bone cement for characterization and enhanced mechanical properties of biopolymer composites

Umang Dubey et al.

Summary: A hybrid PMMA biopolymer nanocomposite was developed by adding graphene nanoplatelets (GnP) and hydroxyapatite (HA) powders to reinforce PMMA bone cement. The addition of 1.5% nanoparticle loading resulted in increased flexural and compression strength.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Materials Science, Characterization & Testing

Filler loading effect of Al2O3/TiO2 nanoparticles on physical and mechanical characteristics of dental base composite (PMMA)

A. Nabhan et al.

Summary: This study focuses on enhancing the performance of PMMA composites by adding a hybrid of Al2O3 and TiO2 nanoparticles. Experimental results showed that nanocomposites with 0.8% filler content exhibited the best performance.

POLYMER TESTING (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Dapeng Gu et al.

Summary: This study investigates the synergistic effect of filling ultra-high molecular weight polyethylene (UHMWPE) and heat treatment on the tribological properties of poly(methyl methacrylate) (PMMA)-based composites. The results show that the friction coefficient and wear rate of the composites are significantly reduced by the combination of UHMWPE filling and heat treatment. The improvement in friction reduction is attributed to the lubrication effect of the filled UHMWPE, while the enhancement in wear resistance is attributed to the improvement in hardness and microstructure compactness caused by heat treatment.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Engineering, Mechanical

UHMWPE Modified by Halogenating Reagents: Study on the Improvement of Hydrophilicity and Tribological Properties

Yunkai Li et al.

Summary: The study obtained three groups of ultra-high-molecular-weight polyethylene (UHMWPE) with optimum hydrophilicity through halogenation modification. It investigated the mechanism of hydrophilicity enhancement, explored the synergistic optimization effect on tribological properties, and provided a theoretical basis for using halogenated UHMWPE in friction and wear applications.

TRIBOLOGY TRANSACTIONS (2022)

添加到收藏夹

Article Engineering, Biomedical

Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite

Vidushi Sharma et al.

Summary: This study critically evaluates and analyzes the tribological performance of a chemically modified graphene oxide reinforced HDPE/UHMWPE bionanocomposite as an acetabular liner material for total hip joint replacement. The results show that the modified bionanocomposite exhibits lower friction coefficient and wear rate compared to traditional materials, making it a suitable biomaterial for hip-joint prosthesis.

JOURNAL OF BIOMATERIALS APPLICATIONS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tribocorrosion behavior of 316 L and HDPE composites for orthopedic application

Amira Salem et al.

Summary: Experimental research revealed that loading cuttlebone and red coral into HDPE matrix can enhance the friction, wear, and corrosion resistances of HDPE composites/316 L. Proteins also protect the metal surface against corrosion, thereby enhancing the tribocorrosion performance.

MATERIALS TODAY COMMUNICATIONS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Surface Functionalization of Nanofibers: The Multifaceted Approach for Advanced Biomedical Applications

Deepak Kulkarni et al.

Summary: Nanofiber technology plays a crucial role in drug delivery and biomedical applications. Surface functionalization of nanofibers can enhance their physicochemical and biological properties, making them more effective in tissue engineering and drug delivery.

NANOMATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Surface and Interface Engineering for Nanocellulosic Advanced Materials

Xianpeng Yang et al.

Summary: The article focuses on the importance of nanocelluloses in material engineering and the methods of their preparation, as well as the significance of surface and interface engineering in the process of nanocellulose fabrication.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite

Nur Sharmila Sharip et al.

Summary: The high melt viscosity of ultra-high molecular weight polyethylene (UHMWPE) poses a challenge in melt-processing of nanocomposites. Blending UHMWPE with cellulose nanofiber (CNF) through melt blending led to improved mechanical properties compared to non-melt blending. The mechanical properties of UHMWPE/CNF bionanocomposites were enhanced with the addition of CNF, demonstrating the effectiveness of melt-blending processing.

POLYMERS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A technique engineered for improving thermal conductive properties of polyamide-6 composites via hydroxylated boron nitride masterbatch-based melt blending

Hanyin Guo et al.

Summary: ISP-PN composites prepared by in-situ polymerization and melt blending exhibit enhanced thermal conductivity and mechanical properties, with high volume resistivity to prevent filler re-aggregation.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Chemistry, Physical

Tribological Performance of Composites Reinforced with the Agricultural, Industrial and Post-Consumer Wastes: A Review

Zuzanna Sydow et al.

Summary: Waste management is a leading global challenge in the 21st century, requiring new solutions for waste reuse. Reusing waste for the production of tribological materials not only brings environmental benefits but also may improve the mechanical and tribological properties of materials.

MATERIALS (2021)

添加到收藏夹

Review Materials Science, Paper & Wood

Trends in the production of cellulose nanofibers from non-wood sources

Jordan Pennells et al.

CELLULOSE (2020)

添加到收藏夹

Review Polymer Science

UHMWPE for biomedical applications: Performance and functionalization

Nikhil Avinash Patil et al.

EUROPEAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchical Structural Engineering of Ultrahigh-Molecular-Weight Polyethylene

Lu An et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Applied

Cellulose and lignocellulose nanofibril suspensions and films: A comparison

Ezatollah Amini et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Correction Materials Science, Multidisciplinary

Overview of sterilization methods for UHMWPE through surface analysis (vol 1, pg 3243, 2020)

Melissa Machado Rodrigues et al.

MATERIALS ADVANCES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Coupling effect of starch coated fibers for recycled polymer/wood composites

Daniel Belchior Rocha et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ fabrication of a UHMWPE nanocomposite reinforced by SiO2 nanospheres and its tribological performance

Guojun Shi et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainable one-pot process for the production of cellulose nanofiber and polyethylene / cellulose nanofiber composites

Tengku Arisyah Tengku Yasim-Anuar et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Materials Science, Paper & Wood

Effect of xylanase pretreatment of rice straw unbleached soda and neutral sulfite pulps on isolation of nanofibers and their properties

Mohammad Hassan et al.

CELLULOSE (2018)

添加到收藏夹

Article Forestry

MORPHOLOGICAL, PHYSICAL AND THERMAL CHARACTERIZATION OF MICROFIBRILLATED CELLULOSE

Elaine Cristiana Lengowski et al.

REVISTA ARVORE (2018)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Wear resistance of Polymethyl Methacrylate (PMMA) with the Addition of Bone Ash, Hydroxylapatite and Keratin

G. Emre et al.

9TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (BALKANTRIB'17) (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanocrystalline Cellulose Improves the Biocompatibility and Reduces the Wear Debris of Ultrahigh Molecular Weight Polyethylene via Weak Binding

Shiwen Wang et al.

ACS NANO (2016)

添加到收藏夹

Article Engineering, Chemical

In-situ production of polyethylene/cellulose nanocrystal composites

Tariq M. Mannan et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2016)

添加到收藏夹

Article Engineering, Manufacturing

Surface modification of cellulose nanofibers with alkenyl succinic anhydride for high-density polyethylene reinforcement

Akihiro Sato et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Agricultural Engineering

Hydroxypropyl cellulose/rice straw oxidized cellulose nanocrystals nanocomposites and their use in paper coating

Nahla A. El-Wakil et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

添加到收藏夹

Article Polymer Science

Melt processing of cellulose nanocrystal reinforced polycarbonate from a masterbatch process

Marcos Mariano et al.

EUROPEAN POLYMER JOURNAL (2015)

添加到收藏夹

Article Chemistry, Analytical

Strong interactions during lignin pyrolysis in wood - A study by in situ probing of the radical chain reactions using model dimers

Haruo Kawamoto et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)

添加到收藏夹

Article Orthopedics

Biotribology of artificial hip joints

Francesca Di Puccio et al.

WORLD JOURNAL OF ORTHOPEDICS (2015)

添加到收藏夹

Article Materials Science, Composites

Improving cellulose/polypropylene nanocomposites properties with chemical modified bagasse nanofibers and maleated polypropylene

Mohammad L. Hassan et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

添加到收藏夹

Article Materials Science, Composites

Microstructural, mechanical, and thermal characteristics of recycled cellulose fiber-halloysite-epoxy hybrid nanocomposites

H. Alamri et al.

POLYMER COMPOSITES (2012)

添加到收藏夹

Article Forestry

Nanofibers from bagasse and rice straw: process optimization and properties

Mohammad L. Hassan et al.

WOOD SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Applied

Study on structure and thermal stability properties of cellulose fibers from rice straw

Xiaolang Chen et al.

CARBOHYDRATE POLYMERS (2011)

添加到收藏夹

Article Engineering, Mechanical

Polyester composite based on betelnut fibre for tribological applications

B. F. Yousif et al.

TRIBOLOGY INTERNATIONAL (2010)

添加到收藏夹

Article Engineering, Mechanical

Tribological performance of brake friction materials containing carbon nanotubes

H. J. Hwang et al.

WEAR (2010)

添加到收藏夹

Article Engineering, Mechanical

Potential of kenaf fibres as reinforcement for tribological applications

C. W. Chin et al.

WEAR (2009)

添加到收藏夹

Article Engineering, Mechanical

Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites

Navin Chand et al.

WEAR (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.